Mobile Phone T62u
Para obtener una copia en español de esta Guía del Usuario,
si se encuentra en Estados Unidos, también puede llamar al
1-800-374-2776.
and 6,011,554; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No.2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR,
IT,NL,PT.ES,SE,GB; and additional patents are pending
worldwide.
Register your new phone, purchase Sony Ericsson original
accessories, and see the latest in products by visiting us at
“Microsoft”, “Windows” and the design plus words
e
s
“Microsoft Windows” are each either registered and/or
This manual is published by Sony Ericsson Mobile
Communications (USA) Inc., without any warranty.
Improvements and changes to this manual necessitated by
typographical errors, inaccuracies of current information, or
improvements to programs and/or equipment may be made
by Sony Ericsson Mobile Communications (USA) Inc.,
at any time and without notice. Such changes will, however,
be incorporated into new editions of this manual.
o
pending U.S. Trademarks o
U
wned by Microsoft Corporation
of Redmolnd, Washington, U.S.A.
a
i
The BLUETOcOTH trademarks are owned by Bluetooth SIG,
r
Inc., U.S.A.
e
Please note: Some of the services in this manual are not
m
International Emergency Number 112 or 911. Contact your
msupported by all networks. This also applies to the GSM
Trademarks referred to herein are trademarks oCf their
network operator or service provider if you are in doubt about
whether you can use a particular service or not. Please read
the Guidelines for safe and efficient use and the Limited
warranty chapters before you use your mobile phone.
respective companies.
r
“Ericsson”, “Ericssonz ” and “ERICSSON ORIGINAL
fo
ACCESSORIES” are each registered U.S. Trademarks
t
owned by Telefonaktiebolaget L M Ericsson of Sweden and
©2002, Sony Ericsson Mobile Communications (USA) Inc.
All rights reserved
o
are used with permissNion by Sony Ericsson Mobile
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,
Communications (USA) Inc.
Publication number: AE/LZT 123 7007 R1
08/02 PBM Printed in USA
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
Assistance, Accessories, and
Table of Contents
Accessibility.............................................87
Icons .........................................................88
Index.........................................................91
Guidelines for Safe and Efficient Use........5
Limited Warranty .....................................10
Getting Started..........................................13
Getting To Know Your Phone..................17
Changing Front Covers ............................20
Calling ......................................................23
Personalizing Your Phone........................33
Voice Control ...........................................41
Voicemail .................................................46
Sending and Receiving Items...................55
e
s
U
l
a
i
c
r
e
m
m
Setting Up Mobile Internet.....................o..56
C
Messaging.................................................61
r
WAP.........................................................69
fo
Information Transfer andtExchange.........76
More Features............o...............................77
N
Synchronization........................................79
Security.....................................................83
Troubleshooting........................................84
3
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
4
•
•
•
•
Do not use your product in an area where a potentially
explosive atmosphere exists.
Guidelines for Safe and
Efficient Use
Please read this information before using your mobile
phone.
Do not place your product or install wireless
equipment in the area above your car’s air bag.
Do not attempt to disassemble your product. Only Sony
Ericsson authorized personnel sehould perform service.
Recommendations
If your mobile phone is equipped with infrared, never
s
•
•
•
•
Always treat your product with care and keep it in
a clean and dust-free place.
direct the infrared ray at anyone's eye and make sure
U
that it does not disturb any other infrared units.
l
a
i
Do not expose your product to liquid or moisture
or humidity.
Antenna c
r
e
Only use an antenna that has been specifically designed
Do not expose your product to extreme high or low
temperatures.
by Sony Ericsson for your mobile phone. Use of
m
unauthorized or modified antennas could damage your
m
Do not expose your product to open flames or lit o
mobile phone and may violate regulations, causing loss
of performance and SAR levels above the recommended
limits (see below).
tobacco products.
Do not drop, throw, or try to bend your produCct.
•
•
•
r
Do not use your product near mtedical equipment
Do not paint your product.
fo
Efficient Use
•
o
Hold your mobile phone as you would any other
phone. Do not cover the top of the phone when in use,
as this affects call quality and may cause the phone to
operate at a higher power level than needed, thus
shortening talk and standby times.
without requesting permission.
N
•
Do not use your product when in, or around aircraft,
or areas posted “turn off two-way radio”.
Guidelines for Safe and Efficient Use
5
to use the minimum power required to reach the network.
Therefore, the closer you are to a base station, the more
likely it is that the actual SAR level will decrease.
Radio Frequency (RF) Exposure and
SAR
Your mobile phone is a low-power radio transmitter and
receiver. When it is turned on, it emits low levels of radio Variations in SAR below the radio frequency exposure
frequency energy (also known as radio waves or radio
frequency fields).
guidelines do not mean that there are variations in safety.
While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models
are designed to meet radio frequency exposure
e
Governments around the world have adopted
s
comprehensive international safety guidelines, developed
by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and
IEEE (The Institute of Electrical and Electronics
U
guidelines.
l
a
i
Accessories can significantly affect a mobile phone’s
compliance with the radio frequency exposure guidelines.
Engineers Inc.), through periodic and thorough evaluation For example, the Federal Communication Commission
of scientific studies. These guidelines establish permitted in the U.S. requires that some manufacturers’ accessories
levels of radio wave exposure for the general population. shall be tested, and Sony Ericsson has done so with
c
r
e
m
m
respect to its products. To avoid causing loss of
The levels include a safety margin designed to aossure the
safety of all persons, regardless of age and health, and to performance or radio frequency exposure levels above
C
account for any variations in measuremrents.
the permissible limits it is recommended that you only
use Sony Ericsson or Ericsson original accessories
intended for use with the mobile phone. If you wear the
mobile phone on your body while it is transmitting, and
Specific Absorption Rate (SAR) is the unit of
fo
measurement for the amount of radio frequency energy
absorbed by the body when usting a mobile phone. The
SAR value is determined oat the highest certified power
you do not use a Sony Ericsson or Ericsson original body
N
worn accessory, please ensure that the mobile phone is
level in laboratory conditions, but the actual SAR level
positioned a minimum of 1.5 cm from your body and that
of the mobile phone while operating can be well below
you are not using an accessory that contains any metal.
this value. This is because the mobile phone is designed
6
Guidelines for Safe and Efficient Use
A separate leaflet with SAR information for this mobile
phone model is included with the material that comes
with this mobile phone. This information can also be
breast pocket. When using the mobile phone, place it at
the ear opposite the pacemaker. If a minimum distance
of 15 cm (6 inches) is kept between the mobile phone
found, together with more information on radio frequency and the pacemaker, the risk of interference is limited.
If you have any reason to suspect that interference is
taking place, immediately turn off your mobile phone.
Contact your cardiologist for more information.
Driving
e
s
Please check if local laws and regulations restrict the use
of mobile phones while driving or require drivers to use
handsfree solutions. We recommend that you use
Ericsson or Sony Ericsson handsfree solutions intended
for use with your product. Please note that because of
possible interference to electronic equipment, some
vehicle manufacturers forbid the use of mobile phones
For other medical devicesU, please consult the
manufacturer of the device.
l
a
i
DO NOeT ALLOW CHILDREN TO PLAY WITH YOUR
Children
c
r
MmOBILE PHONE OR ITS ACCESSORIES. THEY
COULD HURT THEMSELVES OR OTHERS, OR
in their vehicles unless a handsfree kit with an external m
C
COULD ACCIDENTALLY DAMAGE THE MOBILE
PHONE OR ACCESSORY. YOUR MOBILE PHONE
antenna supports the installation.
o
Always give full attention to driving and pull off the road OR ITS ACCESSORY MAY CONTAIN SMALL
and park before making or answering a callrif driving
fo
Personal Medical Deovices
PARTS THAT COULD BE DETACHED AND CREATE
conditions so require.
A CHOKING HAZARD.
t
Mobile phones may affecNt the operation of cardiac
Disposing of the Product
Your mobile phone should not be placed in municipal
pacemakers and other implanted equipment. Please avoid waste. Please check local regulations for disposal of
placing the mobile phone over the pacemaker, e.g. in your electronic products.
Guidelines for Safe and Efficient Use
7
Use only Ericsson or Sony Ericsson branded original
batteries and chargers intended for use with your mobile
phone. Other chargers may not charge sufficiently or may
produce excessive heat. Using other batteries and
chargers could be dangerous.
Power Supply
Connect the AC power adapter only to designated power
sources as marked on the product. Make sure the cord is
positioned so that it will not be subjected to damage or
stress. To reduce risk of electric shock, unplug the unit
from any power source before attempting to clean it.
The AC power adapter must not be used outdoors or in
damp areas. Never alter the cord or plug. If the plug will
not fit into the outlet, have a proper outlet installed by
a qualified electrician.
•
Do not expose the battery to extreme temperatures,
never above +60°C (+140°F). For maximum battery
e
s
capacity, use the battery at room temperature.
U
•
•
•
•
Warning! May explode if disposed of in fire.
l
a
Do not expose the battery to liquid.
i
c
Keep out of children’s reach.
Battery Use and Care
Charge the battery for 12 hours before you use your
mobile phone for the first time. The battery can only
r
e
Turn off your mobile phone before removing the battery.
m
•
•
•
Use the battery for the intended purpose only.
be charged in temperatures between +5°C (+41°F)
m
Do not disassemble or modify the battery.
and +45°C (+113°F).
A new battery or one that has not been usedCfor a long
o
If your mobile phone battery has metal contacts, do not
let the metal contacts touch another metal object. This
could short-circuit and damage the battery.
r
time could have reduced capacityfthoe first few times it
is used.
t
•
Do not allow the battery to be put into the mouth.
Battery electrolytes may be toxic if swallowed.
The talk and standby times depend on the actual
o
transmission conditions when using the mobile phone.
If the mobile phone is used near a base station, less power
is required and talk and standby times are prolonged.
N
8
Guidelines for Safe and Efficient Use
Disposing Of The Battery
The battery should never be placed in municipal waste.
Remember, in order to make or receive calls, the mobile
phone must be switched on and in a service area with
Please check local regulations for disposal of batteries or adequate cellular signal strength. Emergency calls may
call your local Sony Ericsson Customer Care Center for
information.
not be possible on all cellular phone networks or when
certain network services and/or mobile phone features are
in use. Check with your local service provider.
FCC Statement
Using wireless technology to help provide location
e
information in case of an emersgency is a goal shared by
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
U
the entire wireless industry, local phone companies and
l
the emergency response centers. Your phone includes
a
i
(1) This device may not cause harmful interference, and
technology wchich represents the first step towards that
(2) This device must accept any interference received,
including interference that may cause undesired operation.
goal. However, the technique in its current state,
r
combineed with related implementation technologies
means that the method may not always work, even if you
m
are able to speak with an emergency response center.
Emergency Calls
m
Always review with an emergency response center all
location data you have, including intersecting streets,
as well as any landmarks, to assist in locating you.
o
This mobile phone, like any mobile phone, orperates using
C
radio signals, cellular and landline networks as well as
IMPORTANT!
Sony Ericsson is committed to continuing to work with
the entire communications industry to improve location
features for emergency response.
fo
user-programmed functions, which cannot guarantee
connection under all conditions. Therefore you should
never rely solely upon any
communications (e.g. medical emergencies).
t
o
N
mobile phone for essential
Guidelines for Safe and Efficient Use
9
Sony Ericsson is not liable for any service(s) including
operation, coverage, or range of the network services
provided by network carriers independent of Sony
Ericsson.
Limited Warranty
Sony Ericsson Mobile Communications (USA) Inc.
(Sony Ericsson), provides this Limited Warranty for your
mobile phone and original accessories delivered with
your mobile phone (hereinafter referred to as “Product”).
Should your Product need warranty service, please return
e
s
it to the dealer from whom it was purchased, or contact
U
your local Sony Ericsson Customer Care Center (national
l
a
i
further incformation.
r
e
Our Warranty
m
Subject to the conditions of this Limited Warranty, Sony
Ericsson warrants this Product to be free from defects
in design, material, and workmanship at the time of its
original purchase by a consumer, and for a subsequent
period of one (1) year.
m
o
C
r
fo
t
What We Will Do
o
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects
in design, materials, or workmanship, Sony Ericsson
authorized distributors or service partners, in the country
N
10
Limited Warranty
where you purchased the Product, will, at their option,
either repair or replace the Product in accordance with the
terms and conditions stipulated herein.
3 This warranty does not cover any failure of the Product
due to normal wear and tear, or due to misuse,
including but not limited to use in other than the
normal and customary manner, in accordance with the
Sony Ericsson instructions for use and maintenance of
the Product. Nor does this warranty cover any failure
Sony Ericsson and/or its service partners reserve the right
to charge a handling fee if a returned Product is found not
to be under warranty according to the conditions below.
of the Product due to accident, modification or
e
adjustment, acts of God, or damage resulting from
liquid.
s
Conditions
U
to operate is proavided by a carrier independent from
1 The warranty is valid only if the original proof of
purchase issued to the original purchaser by the dealer,
specifying the date of purchase and serial number*, is
presented with the Product to be repaired or replaced.
Sony Ericsson reserves the right to refuse warranty
service if this information has been removed or
changed after the original purchase of the Product from
4 Since the cellular system on which the Product is
l
i
for the orperation, availability, coverage, services,
Sony Ericsson, Sony Ericsson will not be responsible
c
e
or range of that system.
5 mThis warranty does not cover Product failures caused
mby installations, modifications, or repair or opening of
the Product performed by a non-Sony Ericsson
authorized person.
o
the dealer.
C
2 If Sony Ericsson repairs or replaces the Prroduct, the
fo
repaired or replaced Product shall be warranted for the
6 The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Ericsson or Sony
Ericsson branded original accessories intended for
use with the Product.
remaining time of the original warranty period or for
ninety (90) days from the date of repair, whichever is
t
o
longer. Repair or replacement may involve the use of
functionally equivalent reconditioned units. Replaced
N
parts or components will become the property of Sony
Ericsson.
7 Tampering with any of the seals on the Product will
void the warranty.
Limited Warranty
11
8 THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER THAN
THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY.
IN NO EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED
TO LOST PROFITS OR COMMERCIAL LOSS,
* In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof
of purchase.
e
s
U
l
a
i
c
r
e
TO THE FULL EXTENT THOSE DAMAGES CAN m
BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or m
limitation of incidental or consequential damageos, or
C
limitation of the duration of implied warrranties, so the
preceding limitations or exclusions may not apply to you.
fo
The warranty provided does not affect the consumer’s
t
statutory rights under applicable legislation in force, nor
o
the consumer’s rights against the dealer arising from their
N
sales/ purchase contract.
12
Limited Warranty
•
•
When this guide instructs you to press a key, press and
Getting Started
When this guide instructs you to press and hold a key,
press and hold the key for one to two seconds.
About this user’s guide
Before you start reading your User’s Guide, there are
a few things you should know:
Available services
Some services and functions described in this user’s
guide are network- or subscription-dependent. Because of
this, all menus may not be available in your phone.
•
For ease of reference, see “Getting To Know Your
Phone” on page 17 for a quick overview of the main
functions of the phone, shortcuts and general
information.
e
s
U
l
a
This symbol indicates that a service or function
is network- or subscription-dependent.
i
•
•
A Menu Diagram is located on the inside front cover of
this User’s Guide. This is a quick overview of the
menus in your Sony Ericsson mobile phone.
c
r
e
Please consult your service provider for more
inmformation about your subscription.
Your Quick Reference Card on the side back cover ofm
this manual gives you information about your Sonoy
Ericsson mobile phone that you can take withCyou.
The SIM card
When you register as a subscriber with a service provider,
you get a SIM (Subscriber Identity Module) card. The SIM
card contains a computer chip that keeps track of your
phone number, the services included in your subscription,
and your phonebook information, among other things.
•
•
•
Text that is seen in the phone’s display is shown in the
r
following typeface: Add To Phonebook.
fo
Softkey names are shown in the following typeface:
t
o
Softkey.
N
Key names are shown in the following typeface: C.
Getting Started
13
Assembly
Installing Your SIM Card
Never use your phone with the front or back
Before you can use your phone, you need to:
Note!
1 Install your SIM card and lock it in place.
2 Attach and charge your battery.
cover removed.
Insert the SIM card by doing the following:
Be sure to use only a Sony Ericsson lithium
polymer battery that is listed as compatible with
your mobile phone. Using batteries that are not
compatible with your specific mobile phone
will void your warranty.
Note!
e
1 Unlock the SIM card slot by sliding
the plastic bar up towarsd the top of
U
the phone.
l
a
2 Turn the phone upside down and
i
the SIM card slot will unhinge
allowing you access to the SIM
c
r
3 Put your back cover on.
e
card holder.
m
Always turn off the phone and detach the
Note!
3 Slide the SIM card into the slot
formed by the plastic holders.
Make sure that the notch is in the
top right corner of the SIM card
holder. Fold the SIM holder down
flush against the phone.
charger before you insert or remove a SIM card.
m
o
Insert the SIM card and charge the battery
Note!
C
before using the phone.
r
fo
4 Lock the SIM card in place by
sliding the plastic bar toward
the bottom of the phone until you
hear a click.
t
o
N
14
Getting Started
Attaching Your Battery
Putting Your Back Cover On
1 Hold the battery over the back of the phone (the side
that should face up is marked).
2 Locate the connector at the end of the blue, red, and
black wires and insert the plug. It will only fit one way.
Do not force it.
1 Locate the notches along
each side of the back of
the phone.
3 Holding the battery at an angle (label side up), place
the bottom part of the battery into the cavity. There is
a metal clip to hold the battery in place.
4 Lower the top part of the battery until it lays flat.
5 The battery is properly installed.
e
s
U
l
a
i
c
2 rUsing the notches as
e
a guide, slide the back
cover upward. If the wires
are not positioned properly,
the back cover may not
slide up easily.
m
m
Getting Started
15
Charging Your Battery
3 Click the back cover into
place.
To charge your battery for the first time, attach the
phone’s battery to the back of your phone under the back
cover. Then, replace the back cover (see “Putting Your
Back Cover On” on page 15). Once you have installed
your battery, you should not need to remove it.
1 Connect the charger to the ephone at the flash symbol.
s
The flash symbol oUn the charger plug must match with
the flash symbol on the system connector.
l
2 It may take up to 30 minutes before the battery
a
charging iicon appears in the display.
c
3 Wairt approximately 12 hours or until the icon indicates
e
that the battery is fully charged.
m
4 Remove the charger by tilting the plug upward.
m
o
30 min.
C
r
fo
t
o
fully charged
N
16
Getting Started
Getting To Know Your Phone
Phone Views
11 External antenna connector
12 Headset jack
(2.5mm plug/audio jack)
The following diagrams illustrate the front, back, and
bottom views of your phone.
11
13
12
13 Back cover latch
e
1 Earpiece
2 Side volume keys
3 Display
4 Left softkey
5 Joystick
(4-way navigation
with center push key)
6 Options key
7 Keypad
8 Power On/Off key
9 Clear key
1
s
U
l
a
2
3
m
4
5
10
o
9
6
10 Right softkey
7
14 Accessory Connector
(Handsfree, Charger, FM
radio, MP3, Chatboard, etc.)
15 Microphone
8
N
16 Charging connector
14 15 16
Getting To Know Your Phone
17
presses. Press
, Lock Keypad then Select to lock
Standby Screen Icons
your keypad. To unlock your keypad press C then Yes.
10Active profile indicates the currently-selected profile.
The available profiles are Normal (no icon), Meeting
Every time you power on your phone, you will see the
standby screen. You will also see the standby screen
when you exit the menu system. This lists all of the icons
that could appear on your standby screen.
(
), Car (
), Outdoors, (
) Portable ( ),
Home (
), and Work ( ).
1 Alarm icon ( ) is displayed if the alarm is set.
2 Current Time is displayed.
e
11Call screening ( ) allows you to reject certain
s
3 Signal strength (
) shows the relative signal
incoming calls.
12Magic Word (l ) indicator indicates that the Magic
U
Word featurae is enabled.
strength from the wireless system. More bars indicate
a stronger signal (maximum of five bars).
i
c
4 GPRS is within range
and can be used
.
r
13Call list (
) icon shows the number of unanswered
5 Analog channel indicator shows when the phone
is operating in analog ( ) mode.
6 Battery ( ) shows the relative strength of your
e
calls you have received. The icon appears when you
m
have missed calls.
14SMS message (
) indicates that you have received
m
battery. A full icon indicates a fully-charged battery.
o
an SMS (text) message. The number next to the icon
indicates that number of SMS messages you have
received.
15Voice message (
a voice message. The number next to the icon indicates
that number of voice messages you have received.
7 Network tag indicates that the phone is in standby
mode and is ready for use.
C
r
)tor that your phone will not
8 Ringer off/Phone silent indicates that your phone will
fo
) indicates that you have received
not make ring sounds (
make any sounds( ). Press the
key to enter the
o
Options menu to tN
oggle Phone silent on and off.
9 Keylock ( ) indicates that pressing the keys has no
Some service providers send an SMS message
to indicate you have received a voice message.
Note!
effect. The keypad is locked to prevent inadvertent key
18
Getting To Know Your Phone
Key Functions
Options Key
The
key allows you to quickly access options for
Softkeys
some functions (options vary based on the function you
are using). For instance, when you are reading a new
SMS message, you can press the
delete, forward, or reply. You can ealso press
Your phone is equipped with softkeys. The softkey text
labels are displayed on the bottom of your display. To use
the softkey functions, press the left or right key that is
under the text label on the screen.
for choices such as
for help.
s
For example,
press the left
softkey to
select Call List
or press the
Select
Cancel
U
l
left softkey
label
a
i
right softkey
label
c
r
left softkey
right softkey
e
right softkey to
select the Menu from the standby screen.
m
m
Power Key
Press and briefly hold
o
to turn on your phone.
C
r
Joystick
fo
Press the joystick/center select key
to select
t
Tilt the joystick up, downN, left, or right to access the main
a highlighted item.
o
menu tabs, scroll through menus, and view scrolling
selections.
Getting To Know Your Phone
19
2 Press down on the latches.
Changing Front Covers
Removing Your Phone’s Covers
Your phone is equipped with replaceable covers. For
more information on ordering additional covers, see
“Ordering Accessories” on page 87. Never use your
phone with the front or back cover removed.
e
s
3 Pull the bottom ofUthe front
1 Use one hand to press down on
the back cover latch and the
other hand to slide the cover off
the phone.
l
cover off thae phone. Remove
i
the keypad from the cover
c
r
(if necessary).
e
m
m
o
C
r
fo
t
o
N
20
Changing Front Covers
6 Press the bottom part of the front cover to the phone
until it clicks into place.
7 To replace the back cover, see “Putting
Your Back Cover On” on page 15.
Replacing Your Phone’s Covers
1 Locate the four notches on the front
cover (as indicated here).
2 Holding the front cover horizontally
(flat) place the keypad in the cover.
3 Push down on each of the notches
to secure the keypad in the cover.
If any keys are not functioning properly,
e
remove your front cover and adjust your
s
keypad.
U
l
a
i
c
4 Locate the tab on the top of the cover.
5 Holding the front cover at an angle,
as shown in the illustration, insert
the tab into the notch on the phone.
r
e
Making and receiving calls
m
1 Press and briefly hold
to turn on your phone.
m
2 Enter your PIN (Personal Identity Number), if you
have one for your SIM card. Your PIN is provided
by your service provider.
o
r
fo
If you make a mistake while entering your PIN,
Note!
t
o
delete the wrong number by pressing C.
N
Changing Front Covers
21
5 When the phone rings, press Answer to answer the call.
If you enter the wrong PIN three times in a row,
the SIM card is blocked and the message PIN
blocked appears. To unblock it, you need to
enter your PUK (Personal Unblocking Key).
Your PUK is provided by your service provider.
Note!
Your mobile phone is equipped with an internal
antenna located inside the back of your phone,
above the back cover. For best reception, hold
the phone as you would any other telephone,
Note!
but be careful not toecover this area with
3 Enter the area code (if necessary) and phone number
and press Call to make the call.
your hand.
s
U
l
4 Press End to end the call.
a
i
c
You can call numbers from the Call List, the
phonebook, or a manually entered number. For
Note!
r
e
more information, see “Call List” on page 24
and “Phonebook” on page 25. You can also use m
m
your voice to make calls. For more information,
o
see “Voice Control” on page 41. C
r
fo
t
o
N
22
Changing Front Covers
Making international calls
Calling
1 Press and hold
until a + sign appears in the
Before you can make or receive any calls, you must turn
on the phone and be within range of a network. See
“Making and receiving calls” on page 21.
display. The + replaces the international access code
of the country from which you are calling.
2 Enter the country code, area code (without the leading
zero) and phone number, press Call.
To change earpiece volume during a call
Press the upper or lower side volume key to increase
or decrease the earpiece volume.
e
s
When traveling Uoutside the country, you may
Note!
need to chanlge your international access code
IntlAcciessCode.
c
r
by scrolling to Phonebook, Special Numbers,
a
To mute the microphone during a call
Press and hold C until the display shows Microphone
Muted. Press and hold C again to resume the conversation.
e
Mmaking emergency calls
To make an emergency call, enter your local emergency
Automatic redialing
m
number and press Call.
If the connection of the call failed and the display shows
o
Your mobile phone supports the international emergency
numbers, 112, 911, or 08. This means that these numbers
can normally be used to make an emergency call in any
country, with or without a SIM card inserted, if a network
is within range.
Retry?, press Yes. The phone redials the number (up to
C
10 times):
r
•
•
until the call is connected.
until you press a key or receive a call.
fo
t
o
Do not hold the Nphone to your ear while waiting.
Note!
Some service providers may require that a SIM
card is inserted, and in some cases that the PIN
has been entered as well.
Note!
When the call is connected, the phone gives
a loud signal. Automatic redialing is not
available for fax and data calls.
Calling
23
In some countries, other emergency numbers may also
be promoted. Your service provider may therefore have
saved additional local emergency numbers on the
SIM card.
Missed calls
If you have missed a call, Missed Calls: 1 appears in
standby mode, indicating the number of missed calls.
Checking your missed calls
Viewing your local emergency numbers
Scroll to Phonebook, Special Numbers, Emergency Nos.
1 Press Call List to display the missed calls (
).
2 To call a number from the list, scroll to the number and
e
press Call.
s
U
Receiving calls
l
When you receive a call, the phone rings and indicates
who is calling you (if your subscription includes Caller
ID service and the caller’s number is identified). If you
have saved the number in your phonebook, the name
associated with that number is displayed. If the number is
Call List
a
i
The numbers or names of the last 50 calls made, received,
and missed are saved in your Call List. If you have
Calling Line Identification (CLI) service, the caller’s
name and number will also be identified.
c
r
e
m
a restricted number, the display shows Caller ID withheld.
m
Calling a number from the call list
1 To enter the call list, press Call List from standby.
2 Scroll to the number you want to call, press Call.
o
Answering a call
C
•
Press Answer.
r
fo
Rejecting a call
Clearing the Call List
Scroll to Call Info, Clear Call Lists.
t
•
•
Press Busy, or
o
Press the upper orN
lower side volume key twice.
You can also use your voice to answer or reject
Note!
calls. See “Voice Control” on page 41.
24
Calling
Phonebook menu. If you want to edit a contact saved on the
SIM card, you first need to copy the contact to the phone.
Phonebook
Adding a contact
To copy contacts to the phone, scroll to Phonebook,
SIM Card, Copy from SIM.
1 Scroll to Phonebook, Add Contact.
2 Scroll to the field you want to fill in, press Edit.
3 Enter the information.
Copying the contacts stored on your SIM card
4 Press OK.
1 Scroll to Phonebook, SIM Card, Copy from SIM.
e
5 Select the next field and so on.
6 When you have entered the information, scroll to Save
and Exit? and press Proceed.
2 Press Select.
3 Copy from SIM may take a few minutes. Copy now?
s
U
l
appears on youradisplay.
Default (srtandard) number
Each contact has a default phone number. The first phone
number you link to a contact automatically becomes the
default number. If you scroll to a certain contact in the
Call Contact list and then press and hold Call, the default
number is dialed.
i
4 Press Yes. c
The total number of contacts varies according
to the amount of stored information for each
contact. You can check the number of available
contacts under Phonebook, Memory Status.
Note!
e
m
m
o
Copy contacts
You can copy the contacts between your phone’s memory
C
r
and the SIM card. The number of contacts that can be
Setting the default number
saved depends on the type of SIM carfd.o
To copy contacts to the SIM coard, scroll to Phonebook,
1 Scroll to Phonebook, Edit Contact.
2 Enter the first letter of the contact and press OK.
3 When the contact is highlighted, press Edit.
4 Select Default Number and press Select.
5 Scroll to the number you want to be the default number
and press Select.
t
SIM Card, Copy to SIM. N
If you insert a SIM card with saved contacts in your phone,
you can call a contact by selecting SIM Card from the
Calling
25
Speed dialing from your phonebook on your
SIM card
Speed dialing
You can store numbers in your phone’s phonebook or in
the phonebook on your SIM card.
•
Enter the location number then press Call to dial the
number corresponding to the phonebook position on
your SIM card.
or
Speed dialing from your phonebook on your
phone
•
From standby, press and hold one of the number keys
2-9 to find a contact beginning with the first letter on
that key (or closest following). For example, press and
hold 5 to go to the first contact beginning with “J”.
To go to a contact beginning with “L” press 5 three
times after you have entered the list of contacts.
•
•
•
Enter the position number.
e
s
Press
.
U
l
Press Select.
a
i
c
Changing position numbers
1 Scroll to Phonebook, Contact Mngr., Position List.
2 Select the phone number you want to move.
3 Select the position to which you want to move the
r
e
•
•
Scroll to the contact you want to call.
When the contact you want to call is highlighted, press m
m
Call. Scroll to the number you want to call (ifomore
phone number.
than one number is stored for that contacCt). Press Call
4 When you have finished press Back.
5 Changes will apply when phb. is copied. Copy to
SIM? appears in the display. Press Yes to copy your
changes to your SIM.
again.
r
You can also use the Call Contact option in the
Note!
fo
Phonebook menu to call a contact.
t
o
N
26
Calling
Updating the phonebook
When needed, you can easily update or delete any contact
information.
Checking the memory
With the Memory status function in your phonebook, you
can check how many positions you have left in your
memory.
Editing a contact
1 Scroll to Phonebook, Edit contact.
2 Enter the first letter of the contact, press OK.
3 Scroll to the contact you want to edit.
To check the phonebook memory, scroll to Phonebook,
Memory Status.
e
s
The total number of contacts varies according
to the amount of stored information for each
contact.
Note!
4 When the contact is highlighted, press Edit.
U
6 Enter the informaation, press Edit, OK.
5 Scroll to the field you want to edit, Select.
l
i
7 Select the next field and so on.
8 When you have entered the information, scroll down
to Save and exit? and press Proceed.
m
c
r
Adding voice commands to contacts
You can add a voice command to a contact.
e
•
•
Select Edit Contact from the Phonebook menu.
m
Deleting a contact
Find the contact you want to edit by entering the first
o
1 Scroll to Phonebook, Edit Contact.
2 Enter the first letter of the contact, press OK.
3 When the contact is highlighted, press C.
4 You will be prompted to confirm your deletion.
few letters of the contact name.
C
r
•
•
Press OK.
fo
Select Edit Voice Tag to add a voice command for the
t
selected contact.
o
•
Press Yes when prompted to Add voice command?
N
If Edit Voice Tag is not selectable, turn Name
Note!
Dialing on.
Calling
27
Deleting all contacts
Scroll to Phonebook, Contact Mngr., Delete All.
to write texts. See “T9™ Text Input” on page 31 for more
information.
Contacts that are saved on the SIM card are not Switching between input methods
Note!
deleted.
Press and hold
during text entry to toggle between
Multitap and T9. To turn T9 on initially, scroll to
Settings, Language, T9 Predictive, On.
Groups
e
s
You can create a group of contacts. By doing so you can
send SMS messages to several recipients at the same
time. See “SMS messages” on page 61.
Input languages
U
Before you start entering letters, you need to select
l
a
the input languages that you want to use when writing.
i
Seelecting input languages
c
Creating a group of contacts
1 Scroll to Phonebook, Groups, Add Group.
2 Enter a name for the group, press OK.
3 Select Add Member.
4 Enter the first letters of the contact you want to add,
press OK.
5 Select the contact by pressing Select.
6 Select a phone number.
7 Repeat steps 3-6 to add more members.
r
1 Scroll to Settings, Language, Input Language.
m
2 Scroll through the list of languages by tilting the
joystick up or down.
m
o
3 Select or deselect a language by pressing
or by Check/Uncheck.
4 Press Exit to exit the menu.
,
,
C
r
fo
t
Make sure a languages other than abc... is
Note!
o
selected in order to T9 to work.
Entering letterNs
There are two ways to enter text, the Multitap method
(default) or by using T9™ Text Input. T9™ Text Input
is a predictive input method and can be a quicker way
28
Calling
Multitap text input
Press… to get…
When saving names in the phonebook or when writing
WAP addresses, you enter letters using multitap text
input. You press each key as many times as needed
to show the letter you want.
9
0
w x y z 9
+ & @ / ¤ % $ € £ ¥ \ § ¿ ¡ 0 Θ Ξ Ψ Ω
# * ↵ ¶
Entering letters using multitap text input
to delete letters and numbers
C
e
Press the appropriate key, 1 – 9, 0 or
repeatedly until
s
the character you want appears in the display. Be sure to
briefly pause between each letter if they are both on the
same key. See the table of the Latin alphabet below:
to shift between capital and lowercase
U
letters
l
a
i
0 - 9
prcess and hold to enter numbers
r
Press… to get…
e
1
2
3
4
5
6
7
8
Space - ? ! ‚ . : ; " ’ < = > ( ) _ 1
a b c â ä æ à Ç 2 Γ
d e f è é 3 ∆ Φ
Options during multitap text input
m
When you press
during multitap text input, you can
m
•
choose from the following list of things to do:
o
C
Symbols – Symbols and punctuation marks such as ?
and , are shown. Move between the symbols by tilting
the joystick up, down left, or right. Select a symbol.
g h i ì 4
r
j k l 5 Λ
fo
t
m n o ñ ö ø ò 6
o
•
Insert Object – You can attach a picture, sound,
melody, or animation (available when composing
SMS messages).
p q r s ß 7 Π Σ
N
t u v ü ù 8
Calling
29
•
Text Format – You can choose how your text will
display by altering the Text Size, Text Style, Alignment,
or New Paragraph submenus (available when
composing SMS messages).
Entering Text Quick Keys
To...
Do this when entering letters
using multitap text input:
Reach the second Press and hold the upper side
letter or character volume key followed by a digit
•
•
Language – You can change your input language.
Input method – You can choose between T9 and
Multitap input methods.
of a key
key (for example, press the
upper sidee volume key then
s
U
lPress the lower side volume key
•
Help – a help screen is displayed.
press 2 to enter a B).
Reach the third
a
i
Example:
letter or character and press any of the number keys
•
•
•
To enter an ‘A’, press 2 once.
of a key c
e
(for example, press the lower
side volume key then press 2
to enter a C.)
r
To enter a ‘B’, quickly press 2 twice.
To shift between capital and lowercase letters, press
m
m
C
You can also use the volume key as a shortcut
, then enter the letter.
Shift between
capital and
Press
.
o
Note!
lowercase letters
r
to certain letters. To enter a ‘B’, press the upper
Enter numbers
Press and hold any of the number
keys
side volume key up at the same time you press
fo
2. To enter a ‘C’, prtess the lower side volume
key down at theosame time you press 2.
N
Enter a question
mark
Press and hold the lower side
volume key down and press 1
30
Calling
™
T9 Text Input
To...
Do this when entering letters
using multitap text input:
Apart from the way you normally enter letters in your
phone, using multitap text input, you can use T9™ Text
Input for entering SMS messages and email. The T9 Text
Input method uses a built-in dictionary to recognize the
most commonly used word for each sequence of key
Enter the @-sign Press and hold the lower side
volume key and press
Enter a space
Press 1
presses. This way, you press each key only once, even if
e
Delete letters and Press C
numbers
the letter you want is not the first letter on the key.
s
U
l
Shift between input
methods
T9™ Text Input does not work for phonebook
entries or WAP addresses.
Note!
Press and hold
(if T9 is turned on and
available).
a
i
c
r
Entering letters using T9 Text Input
1 Scroll to Messages, SMS, Send New.
2 For example, if you want to write the word “phone”,
e
Shift between input
languages
Press and hold
one language is turned on.
if more than
m
mpress 7 4 6 6 3.
Enter a p (pause)
when entering
a phone number
of composing
a melody
Press and hold
o
3 If the word shown is the one you want:
C
•
press 1 to accept and add a space.
r
If the word shown is not the one you want:
fo
•
•
tilt the joystick up or down repeatedly to view
alternative words (candidates). Accept a word and
add a space by pressing 1.
t
o
N
press
to scroll through the available words.
Calling
31
If you do not find the word you want by pressing
:
•
•
Edit Word – Edit the suggested word by using multitap
text input.
•
•
•
•
Press and hold
Select Edit Word.
Delete the entire word by pressing C.
Write the new word using multitap text input.
to go to a list of options.
Text Format – You can choose how your text will
display by altering the Text Size, Text Style,
Alignment, or New Paragraph (available when
composing SMS messages).
The word is added to the dictionary. The next time
you enter the same characters, the word you just
added to the dictionary will appear as one of the
alternative words.
e
•
•
•
•
Language – You can change your input language.
s
Input Method – A list of input methods is shown.
U
Candidatesa– A list of alternative words is shown.
l
Help –cA help screen is displayed.
4 Continue writing your message. See also “Sending
SMS messages” on page 61.
i
r
e
Turning off T9 Text Input Method
Options during predictive text input
m
You can turn off T9 Text Input. This setting is valid for all
input of texts – not only for the text you are currently
writing. Turn off T9 Text Input by doing one of the
following:
If you press
when writing, you enter a list of options.
You can scroll through these options by pressing the
m
upper or lower side volume key or by tilting theojoystick
C
up or down:
r
•
Scrolling to Settings, Language, T9 Predictive, Off.
Symbols – Symbols and punctfuaotion marks such as ?
•
and , are shown. Move between the symbols by tilting
the joystick up, down, left,tor right. Select a symbol.
o
•
Insert Object – You can attach a picture, sound,
N
melody, or animation (available when composing
SMS messages).
32
Calling
Resetting the phone
1 Scroll to Settings, Master Reset.
Personalizing Your Phone
You can adjust the phone settings to suit your own
requirements.
2 Select Reset Settings or Reset All. Reset settings
changes your customizable settings (under the
Settings menu) to the default values. Reset All
changes all of your phone’s settings to the factory
If you change a setting which is included in
a profile, the active profile is also changed.
See “Profiles” on page 39.
Note!
defaults that were selected when you purchased your
e
phone and erases everything that you have saved in
s
your phone’s memory (for example, contacts, SMS
U
messages, and pictures).
l
Master reset
a
3 Enter the phonelock code (0000 or the new code if you
i
You can reset all the settings in the phone to the factory
defaults by choosing Settings, Master Reset. Factory
defaults are not necessarily the same settings as when you
purchased your phone.
have changed it).
c
r
e
m
m
Before performing a Master Reset, you may
Note!
o
want to copy your phonebook to your SIM card.
C
r
fo
t
o
N
Personalizing Your Phone
33
Pictures
Editing and saving a picture
Your phone contains several pictures which you can send 1 Scroll to Extras, Pictures.
in an SMS message.
2 Select a picture group.
3 Tilt the joystick up or down to scroll through the
pictures. Select a picture and press Edit to view the
Your mobile phone has the capability to load,
Note!
store and forward additional ringtone melodies,
pictures, and other graphic images. The use of
such melodies, pictures or images may be
restricted or prohibited by rights of third parties,
including but not limited to restriction under
applicable privacy, copyright or trademark laws.
You, and not Sony Ericsson, are entirely
editing tools. You can nowestart to edit the picture.
5 Select Save. The pUicture is saved in My Pictures.
See the table below.
to view yoursoptions.
How to use the kelys when editing a picture:
4 Press
a
i
Press… c
r
m
to…
responsible for additional melodies, pictures
or images that you download to or forward
1 e
move the cursor up and left.
2
3
4
5
move the cursor up.
from your mobile phone. Prior to use of any
additional melodies, pictures or images, plmease
verify that your intended use is properlyolicensed
move the cursor up and right.
move the cursor left.
C
or is otherwise authorized. Sony Ericsson does
r
not guarantee the accuracy, integrity or quality
lift up or put down the pen.
Press and hold to switch between zoom
and full size view.
of any additional ringtofneos, pictures, images
t
or any other third party content. Under no
o
circumstances will Sony Ericsson be liable in
6
7
N
move the cursor right.
any way for your improper use of additional
ringtones, pictures, images or other third party
content.
move the cursor down and left.
34
Personalizing Your Phone
You can delete the edited pictures from My Pictures and
My Favorites, but you cannot delete the original pictures
that were in the phone when you bought it.
Press… to…
8
9
move the cursor down.
move the cursor down and right.
move the cursor 1, 5, or 10 spaces.
Deleting a picture from My Favorites
1 Scroll to Extras, Pictures, My Favorites.
2 Scroll to a picture and press C. e
SAVE and exit the picture.
s
Deleting a picture from My Pictures
U
1 Scroll to Extras, Pictures, My Pictures.
l
CANCEL and exit the picture editor.
a
2 Scroll to a picture and press C.
i
sorunds and melodies
c
C
press and hold to clear the picture.
switch line thickness.
Ring
e
Your phone comes with a number of ring sounds and
melodies. You can edit your ring sounds and melodies,
and send them to a friend, in an SMS message. It is also
possible to download melodies via WAP.
m
m
switch between black and white pen color.
o
C
r
Adding a picture to My Favorites
My Favorites is a collection of your favorite pictures.
•
Select Voice Calls from the Settings, Sounds & Alerts,
Ring Sounds menu and select a ring sound.
fo
t
1 Scroll to Extras, Pictures. o
2 Select a picture group.N
Setting the ring sound volume
1 Scroll to Settings, Sounds & Alerts, Ring Volume.
2 Press the upper or lower side volume key or tilt
the joystick left or right to increase or decrease
the volume.
3 Scroll to a picture and press
.
4 Press Yes to add the picture.
Personalizing Your Phone
35
3 Save the setting.
Receiving melodies
When you receive a sound or melody, you will be
prompted to save the sound after selecting the melody.
Editing a ring sound or melody
1 Scroll to Settings, Sounds & Alerts, My Melodies,
choose a melody, Select, Edit.
For legal information about downloading
melodies and pictures, see “Pictures” on
Note!
Note!
•
•
•
Your keypad now works as
a keyboard. Press a key to
enter a note.
Press and hold the key to make
the note longer. There are four
different lengths of notes.
page 34.
e
s
Downloaded melodies will be saved to
U
My Melodies.
l
a
i
Increasing ring
c
theelowest volume to the highest.
Press
to change octave
r
You can choose a ring sound that rises in steps from
of tone.
Press
Press
•
•
•
once to raise the note one semitone.
twice to lower the note one semitone.
m
To turn increasing ring On or Off, scroll to Settings,
m
Press C to remove notes.
Sounds & Alerts, Increasing Ring.
o
2 To listen to your melody, press Play.
3 You will be prompted with Accept? PresCs Yes to
Specific ring sounds for personal calls
If you subscribe to the Two Line Service, you
can set different ring sounds for the two voice
lines. Line 1 and Line 2 are displayed instead of Voice
calls. If your SIM subscription supports fax and data
calls, you can set different ring sounds for voice, fax
and data calls respectively.
r
accept it, or press No to continue composing.
fo
t
To send a ring soound or melody in an SMS
message, see “Inserting an item in an SMS
message” oNn page 62.
Note!
36
Personalizing Your Phone
Vibrating alert
To set the vibrating alert
Not all service providers support Two Line
Service.
Note!
1 Scroll to Settings, Sounds & Alerts, Vibrating Alert.
2 Select the setting you want.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a Personal
ring sound to up to 10 callers.
Minute Minder
From the Call Info, Call Timers menu, you can also turn
e
Setting a specific ring sound for a caller
1 Scroll to Settings, Sounds & Alerts, Ring Sounds
Personal Rings, Add New, Add.
2 Enter the contact name, OK.
3 Select a ring sound.
s
on the Minute Minder.
U
If you turn on the minute minder, you hear a beep once
l
a
every minute duriing a call.
r
c
Time settings
e
The time is always displayed in standby mode.
m
Sounds & Alerts
You can choose to be notified of an incoming call by them
To set the time, scroll to Settings, Time and Date,
Set Time.
buzzing of the vibrating alert. You can set the phone’s
o
vibrating alert to one of the following:
C
To set the time format, scroll to Settings, Time and Date,
Time Format. You can choose a 12-hour clock or
a 24-hour clock.
r
•
•
On – all the time.
fo
On if silent – on when the ring tvolume is turned off
or when you have set the phone to silent.
o
If you select the 12-hour clock, you can alternate between
am and pm by pressing
.
•
Off – all the time.
N
Personalizing Your Phone
37
Date
Automatic keylock
When the phone is in standby mode, you can press the
Automatic keylock means the keypad is locked 25 seconds
upper or lower side volume key to see today’s date in the after you last press a key.
Status menu. You can set the date and date format in the
•
To turn automatic keylock On or Off, scroll to
Settings, Locks, Auto Keylock.
Settings, Time and Date menu.
•
To lock the keypad manually, press and hold C
The time is also displayed when your phone is
in “sleep” mode.
Note!
e
and select Lock Keypad or press
and select
s
Lock Keypad.
U
Time zone settings
l
The keypad remains locked until you answer an incoming
call or until yoau unlock the keypad manually.
•
Under Settings, Time and Date, Advanced
menu, you can set time zone and daylight saving
time. Changing these, changes the time accordingly and
thus also the appointments and tasks in your calendar.
i
To unlcock the keypad, press and hold C. When
e
r
prompted with Unlock keypad?, press Yes to confirm.
m
My Shortcuts
You can place your favorite functions that you want to
reach quickly and easily in the My Shortcuts menu.
m
Keypad lock
o
You can lock the keypad to avoid dialing a number by
C
accident.
r
Calls to the internattional emergency
Adding a function to My Shortcuts
1 Scroll to the menu item that you want to add to
My Shortcuts.
fo
numbers 112, 911, or 08 can still be
Note!
o
made when the keypad is locked.
N
2 When the item is selected, press
, then select
Some service providers may require that a SIM
card is inserted, and in some cases that the PIN
has been entered as well.
Add Shortcut.
38
Personalizing Your Phone
Editing a shortcut in My Shortcuts
1 To edit a shortcut, scroll to My Shortcuts.
2 Scroll to the menu item that you would like to edit
You can reset all profile settings to the way they were set
when you bought your phone by scrolling to Settings,
Profiles, Reset Profiles.
and press
. You can choose Delete to remove
the shortcut from the list or you can choose Change
Position to edit the order of the selected shortcut in
the list.
Menu language
Most SIM cards automatically set the menu language to
the language of the country where you bought your SIM
e
s
card. If this is not the caseU, the preset language is English.
Profiles
l
Your phone has a number of pre-set profiles which are set
to suit a certain environment. You can rename or change
these profiles. For example, when you go to a meeting,
you can simply choose the Meeting profile and a number
of settings such as the ring sound is turned off.
Changing the maenu language
i
1 Scroll to Settings, Language, Menu Language.
2 Choose a language.
c
r
e
You can easily select English by tilting the
joystick to the left, pressing 0 0 0 0, then tilting
the joystick to the right. To easily change the
language to the language on your SIM card,
tilt the joystick to the left, press 8 8 8 8, then
tilt the joystick to the right.
Note!
m
To select a profile, scroll to Settings, Profiles,
Select Profile.
m
o
C
r
Changing a profile setting
1 Scroll to Settings, Profiles, Edit Profile.
fo
3 Change the profile settings oand press SELECT to
2 Choose a setting.
t
Display light
The Display Light can be set to automatic, off, or on.
In automatic mode, the display light is turned off a few
seconds after you press the last key.
N
confirm.
To rename a profile, scroll to Settings, Profiles,
Edit Profile, Profile Name.
Personalizing Your Phone
39
•
To set the Display Light, scroll to Settings, Display,
Selecting a greeting
Light.
1 Scroll to Settings, Display, User Greeting.
2 Select a greeting.
Contrast
Background
Use Contrast to adjust the difference in brightness
between the light and dark areas of your display.
Use Background to select a peicture that will appear in
your standby screen.
•
To set the Contrast, scroll to Settings, Display,
Contrast.
s
To set the Background, scroll to Settings, Display,
U
Background.
l
a
Answering mode
i
c
My Pictures
r
When you select Any Key, you can answer a call by
pressing any key (except Busy). When using a portable
handsfree kit, you can set the phone to answer the call
automatically. To select an answering mode, scroll to
Your mobile phone comes with several background
e
pictures you can select. You can also create or download
m
your own background pictures and animations for use in
text messaging. You can download pictures to your PC
and then load them onto your phone using a data cable.
m
Settings, Call Manager, Answering Mode.
o
You can also answer calls using your voice (see “Voice
Control” on page 41).
C
r
You can purchase a data cable from
United States. For more information on
purchasing Sony Ericsson branded or Ericsson
branded accessories, see “Ordering
Accessories” on page 87.
Note!
fo
When you turn your phonoe on or off, the Sony Ericsson
t
User greeting
N
greeting appears in the display. Your service provider’s
own greeting may be shown instead.
40
Personalizing Your Phone
download the freeware background picture program to
your PC. Once you choose or create a picture, upload it
pictures via WAP. Go to Settings, Display, Background,
Select Picture, My Picture. You can only store one
customized background picture in your phone at a time,
but you can store additional pictures in your personalized
Voice Control
With your mobile phone, you can use your voice to:
•
Call someone by saying the name and number type
(for example, home, work, etc.).
•
•
•
Answer and reject calls.
Record or listen to voice memoes.
s
U
Activate the voice clontrol by saying a “Magic Word”.
For more informaation on this feature, see “The Magic
i
Phone number display
There are two ways that you can check your own phone
number(s):
Word” on page 45.
c
r
You can save up to 50 voice commands. When recording
voice commands, make sure you are in a quiet
environment.
e
m
1 To check your phone number, scroll to Phonebook,
Special Numbers, My Number, choose number type.
m
o
The amount of memory you use varies
according to the length of your recorded words.
Longer words use up more memory.
Note!
If your number is not saved on your SIM card, you
C
can enter it yourself.
2 Press the upper or lower side volume keyrfrom the
standby screen.
fo
Before voice dialing
You must first turn on the voice dialing function and
record your voice commands.
t
o
N
Voice Control
41
Turning voice dialing on and recording number
types
An icon appears next to a contact name which has a voice
command.
1 Scroll to Settings, Voice Control, Name Dialing.
2 Select On. Now you are going to record a voice
command for each number type you use with your
phonebook contacts like “home”, “mobile”, “work”,
“other”.
3 Instructions appear on your display.
4 Select a number type.
5 Lift the phone to your ear, wait for the tone and say the 1 Scroll to Settings, Voice Control, Caller Name.
number type that you have selected. The voice
command is played back to you.
6 If the recording sounds okay, press Yes to save the
voice command. If not, press No and repeat step 4.
7 Repeat steps 4 and 6 for each voice command you
Caller name
You can choose whether or not you want to hear the
recorded contact name when you receive an incoming
call from that contact.
e
s
Turning the caller name On or Off
U
l
a
2 Select On or Off.
i
Voicerdialing
c
e
You can voice dial by saying the name of the contact.
m
m
need.
Making a call
o
Recording a voice command for a coCntact name
fo
1 From standby, press and hold the upper or lower side
volume key.
2 Release the key, lift the phone to your ear, and listen
for the tone.
3 After the tone, say a name, for example “John”.
The name is played back to you.
4 If you have several numbers for that contact, after
a second tone, say the number type, for example,
“home”.
1 Scroll to Phonebook, Edit Contact. r
2 Enter the first letter of the contact name and press OK.
t
5 Press Yes to add aNvoice command.
3 Press Edit.
4 Select Edit Voice Tag. o
6 Follow the instructions in the display.
42
Voice Control
The number type is played back to you and the call is
connected.
5 Instructions appear.
6 Lift the phone to your ear, wait for the tone and say
OK, press Yes. If not, press No and repeat step 5.
7 Say “Busy”, or another word.
From standby, you can also initiate voice dialing, voice
profiles and voice memos by:
•
•
•
Pressing and holding the upper or lower side volume
key.
Pressing the handsfree button (when using a portable When the phone rings, say “Answer” or the alternative
Answering a call using voice commands
e
s
handsfree device).
word you recorded.
U
Saying the Magic Word. See “The Magic Word” on The call is connected.
page 45.
l
a
i
Rejecting a call using voice commands
c
When the prhone rings, say “Busy” or the alternative word
Voice answering
You can answer or reject incoming calls by using your
voice, when using a portable handsfree or a car handsfree The call is rejected. The caller hears a busy tone or the
kit.
e
you recorded.
m
m
call is forwarded to voicemail.
o
C
Turning on and recording profile commands
1 Scroll to Settings, Voice Control, Voice Profiles
2 Select On.
3 Instructions appear.
4 Press OK to proceed.
Turning on voice answering and recorrding voice
answer commands
1 Scroll to Settings, Voice Control, Voice Answer.
fo
t
2 Select On.
o
3 Select or deselect the accessories you want to be able
to use with voice answering by pressing Check or
Uncheck.
N
5 Select a profile.
6 Wait for the tone and say the profile name.
4 Press Exit.
Voice Control
43
7 Press Yes to accept the recording or press No to re-
record.
8 Press and hold the upper or lower side volume key.
9 Release the key, lift the phone to your ear, and listen
for the tone.
4 Press Yes to proceed.
5 Lift the phone to your ear, wait for the tone and say
“Record”, then press Yes if it sounds okay. If not,
press No.
6 Wait for the tone and say “Play”. Press Yes to accept
the recording or press No to re-record.
10Say the profile name. Repeat steps 4 through 6 to
record voice commands for the other profiles.
e
Starting a recording using a voice command
s
Changing a profile using voice commands
1 From standby, press and hold the upper or lower side
volume key until you hear a tone.
2 Release the key, lift the phone to your ear and say the
profile command for the desired profile. The profile
1 From standby, press and hold the upper or lower side
U
2 Release theakey, lift the phone to your ear and say
volume key until you hear a tone.
l
i
andra tone indicates that the recording has begun.
“Record”. The voice command is played back to you
c
e
3 To end the recording, press Done.
command is played back to you and the current profile m
is changed.
Recording voice memos
m
Listening to recordings using a voice command
1 From standby, press and hold the upper or lower side
volume key until you hear a tone.
2 Release the key, lift the phone to your ear and say
“Play”. The voice command is played back to you.
3 Listen to your last recording.
o
C
You can record voice memo commandsrto start or listen
to a voice memo recording.
fo
t
Turning on and recording voice memo
o
1 Scroll to Settings,NVoice Control, Voice Memo.
commands
You can only play your most recent recording
using voice commands.
Note!
2 Select On.
3 Instructions appear.
44
Voice Control
6 Press Yes to proceed.
7 Wait for the tone and say the Magic Word.
The Magic Word
You can record a Magic Word and use it as a voice
command. Say the Magic Word and then one of your
recorded voice commands. The Magic Word is especially
suitable when using a car handsfree kit.
Turn off the Magic Word when you no longer
need totally handsfree access, in order to save
battery power.
Note!
Choose a long, unusual word which can easily
be distinguished from ordinary background
speech.
Note!
Editing your voice commandes
You can keep all your voice commands up to date by
s
U
re-recording them or deleting the ones you do not use.
l
a
Due to the nature of individual speech patterns
and how your phone generates a matching
Magic Word, false matches may occur through
other sources of speech, like your car radio. If
this happens, record a different Magic Word.
Note!
i
1 Scroll torSettings, Voice Control, Voice Memo, Edit
Re-recording a voice command
c
Commands.
e
2 mSelect a voice command.
3 To listen to a recorded voice command, select Play
Voice Tag. To record a new voice command, select
Replace Voice.
m
o
Turning on and recording the Magic WorCd
2 Select On.
1 Scroll to Settings, Voice Control, Magic rWord.
fo
4 Wait for the tone and say the command.
5 You can also edit the voice command for a contact
name in Edit Contact in the Phonebook menu.
3 Select or deselect the accessories you want to be able
to use with the Magic Word bytpressing Check
o
or Uncheck.
N
4 Press Exit.
5 Instructions appear.
Voice Control
45
Tips when recording
If your phone cannot detect speech, one of the following
might have happened:
Voicemail
If your subscription includes an answering
service, callers can leave a voicemail message
when you cannot answer a call.
•
•
You spoke too softly – try speaking more loudly.
You held the phone too far away – hold it as you do
during a call.
Receiving a voicemail message
Depending on your service preovider, you are informed
that someone has left you a voicemail message by a text
•
•
•
The voice command was too short – it should be
around one second long and more than one syllable.
s
U
message (SMS) or by a voicemail indication.
l
You spoke too late or too soon – speak immediately
after the tone.
a
i
Calling your voicemail service
e
c
r
You did not record the voice command when the
handsfree was attached – for voice control with
a handsfree kit, record when the handsfree is attached. m
You can easily call your voicemail service by pressing
and holding 1, if you have saved your voicemail number in
the phone. You get the number from your service provider.
m
•
•
You used another intonation – speak in the same tone
To enter the number, scroll to Phonebook, Special
Numbers, Voicemail.
o
as you did when you recorded the voice command.
C
If you have entries with similar names, record the first
r
and last name to further distinguish the voice tags.
Call time
During a call, the duration of the call is shown
in the display. The Call Info menu allows you
to check the total time of your calls.
fo
t
o
N
Checking the call time of the last call
Scroll to Call Info, Call Timers, Last Call.
46
Voicemail
Checking the total call time
Turning on call forward
Scroll to Call Info, Call Timers, Total Calls.
1 Scroll to Settings, Call Manager, Forward Calls.
2 Select a call category and then a forward alternative.
3 Select Activate.
Checking the call time of your outgoing calls
Scroll to Call Info, Call Timers, Outgoing Time.
4 Enter the phone number to which you want your calls
to be forwarded or retrieve it from the phonebook by
Resetting the total call time
1 Scroll to Call Info, Call Timers, Clear Timers.
2 Select Total Calls or Outgoing Time.
pressing
.
e
s
When the Bar Calls function is on, some
Note!
U
Forward Calls options cannot be activated.
l
a
i
Forwarding calls
If you cannot answer incoming voice, fax,
or data calls, you can forward them to another
number, for example your answering service.
To turn off a call forward, select a forward option and
c
r
select Cancel.
e
m
Checking the status
For voice calls, you can choose between the following
forward alternatives:
mScroll to Settings, Call Manager, Forward Calls.
•
o
•
•
•
Select a call type.
C
When Busy – forward calls if yofu oare already on
AlwaysForward – forward all voice carlls.
the phone.
•
Scroll to the forward that you want to check.
Select Get Status.
•
•
•
t
Not Reachable – forward calls if your phone is
o
turned off.
No Reply – forwardNcalls that you do not answer
within a specified time limit (dependent upon your
service provider).
Voicemail
47
Receiving a second call
More than one call
•
•
•
To answer the second call and put the ongoing call on
hold, press Answer.
You can handle more than one call
simultaneously. For example, you can put an
ongoing call on hold, while you make or answer a second
call, and then switch between the two calls.
To reject the second call and continue the ongoing call,
select Ignore.
To answer the second call and end the ongoing call,
select Release & Answer. e
U
During a call the Ongoing Call menu replaces
Note!
the Call Info menu (which you can access by
s
pressing
).
Handling two calls
l
When you have one ongoing call and one call on hold,
a
Call waiting service
i
you can do the following:
c
If the call waiting service is activated, you hear a beep
in the earpiece if you receive a second call during an
ongoing call.
r
•
•
Press Hold to switch between the two calls.
e
Press End to end both calls.
m
To activate or deactivate the call waiting service, scroll
to Settings, Call Manager, Call Waiting.
m
You can only put one call on hold.
Note!
o
C
Making a second call
1 Press Hold to put the ongoing call on hold.
2 Enter the number you want to call, or retrieve
r
Conference calls
In a conference call, you can have a joint
conversation with an additional five people.
You can also put a conference on hold and make
another call.
fo
t
a number from the phonebook.
o
N
You can only put one call on hold.
Note!
48
Voicemail
Creating a conference call
Extracting a participant
To create a conference call, you must first have one
ongoing call and one call on hold.
1 Scroll to Ongoing Call, Extract party:.
2 Select the participant.
You may now have a private conversation with the
participant.
Joining the two calls into a conference call
Scroll to Ongoing Call, Join Calls.
Rejoining the participant to the conference
e
Adding a new participant
group
s
1 Press Hold to put the conference call on hold.
2 Call the next person you wish to include in the
conference call.
3 Scroll to Ongoing Call, Join Calls.
4 Repeat steps 1 to 3 to include more participants.
Scroll to Ongoing Call, Join Calls.
U
l
a
Releasing Participants
i
one by oneror all at once.
You can release participants from the conference group
c
e
m
Checking the participants in the conference
group
1 Scroll to Ongoing Call, Parties in Conf.
The first participant’s phone number is displayed, if
available. Otherwise the display shows partr1, 2, etc.
2 Tilt the joystick up or down to check the other
Releasing a participant
•
mScroll to Ongoing Call, Release Part.
•
o
Select the participant.
C
Releasing all participants
fo
Scroll to Ongoing Call, Release All.
t
participants.
o
Making a Call during a Conference Call
You can put the conference group on hold and make
another call. You can then switch between the new call
and the conference call.
N
Having a private conversation
You can have a private conversation with one of the
participants and put the other participants on hold.
Voicemail
49
Putting the conference group on hold to make
a new call
1 Press Hold.
Calling Card Service
To be able to make calling card calls, you need to turn on
the service.
2 Enter the number you wish to call and press Call.
Setting Up Calling Card Numbers
Switching between the new call and the
conference group
Press Hold.
You can save two calling card numbers in your phone.
e
Saving a card number
s
1 Scroll to Phonebook, Calling Cards.
U
Ending the new call and return to the conference 2 Enter your phonelock code.
group
Press Hold.
l
3 Select CardaSetup.
i
4 Select Add New.
c
r
5 Enter the access number of the calling card server.
6 Enter a name that you want to associate with your
e
Ending the conference call
Press End.
m
calling card server.
m
7 Enter the verification code of the calling card server.
8 Select which you want to send first – the number that
you want to call or the verification code.
o
Calling card calls
C
When making international or long distance calls, you
r
charges to a credit card accoutnt, instead of your normal
N
may want to use the calling card service to redirect the
fo
Deleting a card number
1 Scroll to Phonebook, Calling Cards.
2 Enter your phonelock code.
3 Select Card Setup.
4 Scroll to the card number that you want to delete.
5 Press Select.
account.
o
You cannot use the calling card service when
Note!
making a fax or a data call.
50
Voicemail
6 Select Delete when the card you want to delete is
Making a Calling Card Call
selected.
1 Enter the phone number you wish to call or retrieve it
from the phonebook.
7 Press Yes to confirm deletion of the selected
calling card.
2 Press and hold Call.
The access number of the calling card server is called.
During the connecting phase, you are asked to send the
Editing a card number
1 Scroll to Phonebook, Calling Cards.
2 Enter your phonelock code.
3 Select Card Setup.
4 Scroll to the card number that you want to edit.
5 Press Select.
6 Select Edit and edit the card number.
7 Confirm the new number by pressing YES.
phone number that you want to call and the verification
e
code, in the order chosen earlier (see above).
s
3 Press Call or wait a few seconds and the number and
U
code are sent automatically.
l
a
i
Bar Callsc
r
e
You can use the Bar calls service to restrict
certain types of calls from being made and
received. You need a password, which comes with your
m
Choosing a Card
m
You must choose which card you want to use before o
subscription from the service provider, to turn a call bar
on or off.
making a calling card call.
C
r
The following calls can be barred:
Selecting a card
1 Scroll to Phonebook, Calling Cards.
fo
•
•
•
all outgoing calls, All Outgoing.
t
2 Enter your phonelock code.
all outgoing international calls, Outgoing Intl.
o
3 Select Card Selection.N
4 Select the card that you want to use.
all outgoing international calls except to your home
country, Outg. Intl Roam.
Voicemail
51
•
•
all incoming calls, All Incoming.
•
•
•
all calls to NonPhonebook entries, RestrictCallsTo,
NonPhonebook.
all incoming calls when you are not in your home area,
When Roaming.
all calls made with calling cards, RestrictCallsTo,
Calling Cards.
Turning Bar Calls On or Off
1 Scroll to Settings, Call Manager, Bar Calls.
2 Scroll to an option.
3 Select Activate or Cancel.
4 Enter your password.
all calls to specific phone number prefixes,
RestrictCallsTo, My Choice (My Choice allows you to
e
set 3 different prefixes for restriction).
s
U
Fixed dialing
The Fixed dialing function allows calls to be
made only to certain numbers saved on the SIM
card. If an attempt is made to call other numbers, the
l
•
To cancel all call bars, select Cancel All.
a
i
•
To check the status of a call bar, select the call bar
option and then Get Status.
c
r
e
•
To change the password, select Change Passwd.
message Number not permitted appears in the display.
m
Fixed dialing requires a SIM card that allows fixed
numbers to be saved. The fixed numbers are protected
by your PIN2.
If you forward incoming calls, you cannotm
oturn
Note!
on some Bar calls options.
C
r
Emergency calls can still be made, even when
Fixed dialing is on.
Note!
Restrict Calls To
Restrict Calls To allows you to restrict certain types
fo
t
of calls from being made,oregardless of your service
provider. You will need your phonelock code to set
N
Turning Fixed dialing on or off
1 Scroll to Phonebook, Fixed dialing.
2 Enter your PIN2.
Restrict Calls To options.
•
all calls to Phonebook entries, RestrictCallsTo,
Phonebook.
3 Select On or Off.
52
Voicemail
Saving fixed numbers
1 Scroll to Phonebook, Special Numbers, Fixed
Numbers, Add New.
2 Enter your PIN2.
3 Enter the fixed number.
Calls can only be made within the selected group.
Calling outside a closed user group
1 Scroll to Settings, Call Manager, Closed Groups,
Open Calls.
4 Enter the name you want to associate with the number. 2 Select On.
e
Closed user groups
s
Accept calls
The Closed User Group function is a way of lowering call
costs. On some networks it is cheaper to make calls
within a call group. You can save 10 groups.
U
With the accept calls slervice, you can choose to receive
calls only from ceratain numbers. Other calls are
numbers of calls you have rejected are saved in the Call
i
automaticallycrejected by a busy tone. The phone
r
Adding a closed user group
1 Scroll to Settings, Call Manager, Closed Groups,
Edit List.
2 Scroll to Add New.
3 Enter the name of the user group.
4 Enter the index number.
e
List.
m
Adding numbers to the accepted callers list
1 Scroll to Settings, Call Manager, Accept Calls,
Accepted List, Add to List.
2 Select Phonebook (you can add a contact’s number)
or Groups (you can add a group).
m
o
C
r
You get the index number from your service provider.
fo
3 Enter the first letter of the contact or group.
4 Scroll to the number or group you want to add.
t
Activating a group
o
1 Scroll to Settings, Call Manager, Closed Groups,
Edit List.
2 Select a group.
N
3 Select Activate.
Voicemail
53
Selecting an accept option
1 Scroll to Settings, Call Manager, Accept Calls,
Accept From.
networks are selected during an automatic search. For all
such options, scroll to Settings, Networks.
2 Select one of the following:
Contact your service provider for the default
settings that will work with your specific
service.
Note!
•
From All – You receive all calls as normal.
•
From List – you only receive calls from callers in the
Accepted list. All other incoming calls will be rejected.
The caller hears a busy tone and you get no indication
of incoming calls.
e
Additional callingsfunctions
l
U
You can use itelephone banking services or
Tone signals
•
From No One – All incoming calls are rejected.
a
c
control answering machines by sending tone
r
Networks
e
signals (DTMF or touch tones) during a call.
When you turn on the phone, it automatically
selects your home network if this is within
range. If it is not within range, you may use anotherm
mTo send the tones, press 0-9,
•
•
and
.
To clear the display after the call is finished,
press Cancel.
network, provided your service provider has an o
C
agreement that allows you to do so. This is called
r
You can select the network you wfanot to use, or you may
roaming.
Notepad
If you want to make a note of a phone number during
a call, you can use your phone display as a notepad. Use
the number keys to enter the number. When you end the
call, the number remains in the display. You can call
the number by pressing CALL.
t
be able to add a network to your list of preferred
o
networks. You can also change the order in which
N
54
Voicemail
Turning Off Tones
If you use the phone display as a notepad, the person you
Sending and Receiving Items
are talking to hears the tone signals when you press keys. You can send an item such as a business card, a calendar
appointment or a melody using SMS or WAP.
1 Press
.
2 Press Select to choose Turn Off Tones.
Business cards
You can add your own business card to the phonebook.
e
To add your own businessUcard, scroll to Phonebook,
Showing or hiding your number
s
If your subscription supports the Calling Line
Identification Restriction (CLIR), you can hide
your phone number when making a call.
Business Cards, Manage My Own, Add My Own.
l
a
i
You can exrchange business cards between your phone
and anoether phone via SMS.
Exchanging business cards
c
1 Enter the number that you want to call and press
2 Scroll to Hide My Number or Show My Number.
.
m
3 Press Select to choose the highlighted option.
m
Sending your business card
Scroll to Phonebook, Business Cards, Send My Own.
o
You can choose to always hide or always show
Note!
C
your number by scrolling to Phonebook,
r
When you receive a business card via SMS, you accept
the card by pressing Yes. Press Yes again to save the card
in the phonebook.
Special Numbers, My Number.
fo
t
o
N
Sending and Receiving Items
55
Advanced setting information
Mobile Internet, including WAP and email, requires
the following settings:
Setting Up Mobile Internet
In order to use the Internet, browse via WAP
services, or send and receive email messages,
you must have a phone subscription that
supports data transmission and you must have
settings entered.
•
Data Accounts – settings for access to a server for
email messaging.
•
•
WAP Profile – settings for WAP browsing.
Email Account – settinges for email messaging.
s
Contact your service provider for the default
settings that will work with your specific
service.
Note!
Data account settiUngs
You can have several data accounts saved in
your phone, with different settings for different
l
a
i
c
purposres. The main setting for a data account is the
Your service provider may have programmed
your WAP settings. If so, you will not need
to configure your phone.
Note!
e
Account Type (connection method). You can choose
m
from GPRS or DialUp Conn. account types.
m
Contact your service provider for details on any
data usage charges.
Note!
o
Receiving settings in an SMSCmessage
Your Internet service provider may be able to send the
r
required data account, WAP, and email settings directly
GPRS (General Packet Radio Service) allows
fast and efficient access to web content.
fo
to your phone in a text message (SMS).
t
o
You need a subscription that supports GPRS.
Contact your service provider for settings and
useful information.
Note!
N
56
Setting Up Mobile Internet
GPRS settings that are available:
DialUp Conn. settings include the following:
•
APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
User ID – your user id to log on to the external data
network.
Password – your password to log on to the external
data network.
Passwd Request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
•
Phone no. – the phone number of your
Internet service provider.
Data Rate – select the speed you want for the
connection.
•
•
•
•
•
Dial Type – select analog or ISDN connection.
e
s
create a new datUa account and select the access
If you want to change access type, you have to
Note!
l
a
type yoiu want to use.
r
c
•
•
Allow Calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS Only.
IP Address – the IP address that the phone uses
Creating a data account manually
e
1 mScroll to Settings, Data Comm., Data Accounts,
Add Account.
m
2 Select an account type.
when communicating with the network. If you do
o
3 Enter a name for the data account.
4 Enter the settings that you have received from your
service provider.
You will be asked to confirm each setting.
5 Scroll to Save? Select Proceed to save your changes.
not enter an address, the network provides you with
C
a temporary IP address.
r
•
•
DNS Address (Domain name server) – the server
fo
that translates web addresses into IP addresses.
t
Advan Settings (Advanced Settings) – these are
o
optional. Consult your service provider.
N
Editing a data account
1 Scroll to Settings, Data Comm., Data Accounts.
2 Select a data account.
3 Select Edit.
Setting Up Mobile Internet
57
4 Select the setting you want to edit. Edit the setting.
5 Repeat step 4 for other settings you want to edit.
Some WAP Profiles may be set up by your
service provider and you may not be able to
modify them. Contact your service provider
for specific WAP Profiles information.
Note!
Some data accounts may be set up by your
service provider and may not be editable.
Note!
Entering WAP profile settings manually
Preferred service
You can set GPRS on or off. To select preferred mode,
scroll to Settings, Data comm., Preferred Srvc.
1 Make sure you have a data account set up between
e
your phone and the Internet server, as described in
s
“Data account settings” on page 56.
2 Scroll to Browser, WAP Settings.
3 Select Common or a Profile to add a new profile
or selecct an existing profile that you want to edit.
U
l
a
To see the status of GPRS coverage and
connection, press the upper or lower side
volume key from standby to enter the Status
menu and then scroll to GPRS.
Note!
i
r
e
Some WAP Profiles may be set by your service
provider and you may not be able modify them.
Contact your service provider for specific
WAP Profiles information.
Note!
m
m
WAP profile settings
o
The WAP settings are stored in a WAP profile. In most
C
Internet. You set up and use additional WAP profiles,
cases you only need to use one profile tro access the
4 You can now do the following:
for example, when accessing secure Internet sites, such
fo
•
•
Rename – Edit the profile name
Chg Homepage – Enter the address of the WAP site
you want as the homepage.
t
as a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
o
N
58
Setting Up Mobile Internet
•
•
Save to – You can choose all profiles or just the
current profile.
Gateway – You can choose IP settings, SMS
settings, or Change type.
Locks (PIN codes)
PIN codes protect your subscription from unauthorized
use, when accessing certain WAP sites, and to authorize
transactions. Your PIN code acts as a signature when you
An IP address consists of four groups of digits, with confirm a transaction.
a maximum of three in each group. If one of your
digit groups consists of only one or two digits, you
have to enter a leading zero (0) for each digit that is
missing. Example: If the IP address is 123.4.67.901,
write 123.004.067.901.
These codes are supplied by your service
Note!
e
provider if supported.
s
U
A Locks setting may appear in the Security
l
a
submenu:
i
WAP security settings
To establish secure connections when using certain WAP
c
To go to the Locks menu, scroll to Browser,
r
e
WmAP Settings, Common, Security, Locks.
services, you must have certificates saved in your phone.
Your phone may already contain certificates when you
buy it. You can also download certificates from certain
Transaction contracts
m
You can check on transactions you have made with your
phone when browsing. A contract, which contains details
about the transaction, can be saved in your phone.
WAP sites, or receive them from a service provider.
C
o
Checking the certificates in your phone
r
1 Scroll to Browser, WAP Settings, Common, Security.
To check your contracts, scroll to Browser, WAP
Settings, Common, Security, Contracts.
2 Select Trusted Certif. or Client Cerftifo.
t
o
N
Setting Up Mobile Internet
59
•
•
Copy Outgoing – Select Copy Outgoing if you want
email messages sent from your phone also to be sent to
an email address of your choice. This way, your sent
messages are copied and can be saved for future
reference.
Email account settings
An email account specifies, for example, the server that is
used for your email messages.
Contact your service provider for the default
settings that will work with your specific
service.
Note!
Check Interval – Select how often you want the phone
to connect to your email server and check for incoming
e
If you have both aln office and a home email account,
s
email messages.
Creating an email account
1 Scroll to Messages, Email.
2 Select Edit Account.
3 Select Add New
4 Enter a name for the account, for example Home
or Office.
U
you can set one of them as default by selecting Select
a
i
Account from the Messages, Email, Options menu and
selecting the account.
c
r
e
See “Email” on page 67 for information about how to
m
use email.
5 Select Connect using.
6 A list appears with the data accounts that youohave
m
7 Select the data account you want to urse with this email
saved in your phone.
C
account.
fo
8 Enter the rest of the settingts in the list. You use the
same email settings in your phone as in your PC email
o
If you do not haveNan email service, contact your
program.
service provider to get all the necessary settings.
60
Setting Up Mobile Internet
2 If there is no number in the list, select Add New.
3 Enter the number, including the international “+” sign
and country code.
Messaging
Your phone supports various messaging services
– SMS messages, enhanced text messages with
pictures and/or melodies (EMS), and email
Setting the email gateways
messages. Please contact your service provider for details 1 Scroll to Messages, SMS, EmailGatewaySMS.
on which services you can use.
If the email gateway is saved on the SIM card it
e
appears in the display.
2 If there is no email gateway in the list, select Add New.
s
U
SMS messages
3 Enter the email gateway.
l
Short Message Service (SMS) messages are text
messages can be sent to one person, or to a group
of recipients that you have saved in the phonebook
(see “Groups” on page 28). EMS messages can also
contain pictures, animations, melodies, and sounds.
a
i
The email gateways is used to send SMS
Note!
c
r
messages to email addresses.
e
Smending SMS messages
m
For information about entering letters, see “Entering
letters” on page 28.
o
First make sure that the number of your service Ccenter is
set. The number is supplied by your servicerprovider and
Before you start
Writing and sending an SMS message
1 Scroll to Messages, SMS, Send New.
2 Write your message.
is usually saved on the SIM card.
fo
t
o
Setting the service ceNnter number
1 Scroll to Messages, SMS, Service Centers.
If the service center number is saved on the SIM card
it appears in the display.
Messaging
61
3 Enter the recipient’s phone number or retrieve a number 4 Select Picture, Sound, Melody, or Animation.
or a group from the phonebook by tilting the joystick
to the left. To send to an email address, set your
Message Type to Email. See “Sending a message to an
email address or phone number found in a message” on
page 66.
5 Select an item and confirm your selection.
Long messages
A short SMS message can contain up to 160 characters,
depending on the language. You can send a longer
4 Press Select to choose a highlighted contact and
automatically send the message.
message, but it is automatically divided into several
e
s
shorter messages (up Uto six messages) and you are
charged for each message.
Sending a message later
l
a
1 Scroll to Messages, SMS, Unsent Box.
2 Select the message you want to send.
You may now edit your message.
i
Turning long messages on or off
1 Scroll to Messages, SMS, Long Messages.
c
r
e
2 Select On or Off.
3 Press Send to send the message as described above.
m
Sending a long message
If you send an SMS message to a group, yomu are
is sent to.
Note!
1 Scroll to Messages, SMS, Send New.
2 Enter your message. The display shows how many
parts the message is divided into.
3 Enter the recipient’s number or tilt the joystick to
the left to retrieve the number from the phonebook
or the call list.
4 Send the message by pressing OK.
5 If the recipient’s phone does not support long
messages, the messages are received one at a time.
o
charged for each SMS number thaCt the message
r
Inserting an item in an SMS message
fo
1 Scroll to Messages, SMS, tSend New. To send a long
o
SMS message, you may need to turn on Long
Messages (see below).
N
2 While writing your message press and hold
or
.
3 Select Insert Object.
62
Messaging
Templates
If you have one or more messages that you send often,
you can save these as templates. Your service provider
may also have saved some templates in your phone.
Message options
You can set a default value for the message
options below, or you can turn on the Set on
send option which means that you choose the
settings each time you send a message.
Creating a template
1 Scroll to Messages, SMS, Templates, Add New
2 Create template by entering text.
•
Message type – The phone supports different types of
e
messages. Your service provider may offer the facility
s
of converting an SMS message into a format (email or
3 Write the message, OK.
U
to receive the message. To send an SMS message to an
a
fax, for example) thlat suits the equipment that is going
email address,iset the Message Type to Email.
4 Use template for this msg.? appears in the display.
5 Press Yes to use the template to create an SMS message.
6 Press OK to send the SMS message. Press Cancel
to save the template without sending the message.
7 Enter the number that you want to send an SMS
message.
c
r
•
Validity Period – If your message cannot be delivered,
e
for example, if the recipient has turned off the phone,
m
Request Reply – Include a reply request if you want
your service center can save the message to send it later.
m
8 Press OK to send the message or Cancel to save
the template without sending the message.
•
o
the recipient of your message to reply.
C
•
Status request – Check if a message has been
delivered.
r
If you want to use a template as a message, scroll to
Messages, SMS, Templates, select thfe toemplate you
want from the list and then select tCreate Message.
Some features are operator dependent.
Note!
o
To delete a template, scroNll to Messages, SMS,
Setting a default value for the options above
1 Scroll to Messages, SMS.
2 Select the option you want.
Templates. Select the template you want to delete and
press C. Press Yes to confirm the deletion or press No
to cancel the deletion.
Messaging
63
3 Select Set Default.
the same time. [...] indicates that part of the message
4 Select your default value from the list.
has yet to be received.
Turning Set on send on or off
1 Scroll to Messages, SMS.
2 Select the option you want.
3 Select Set on send.
If the sender of the message wants you to reply,
the display shows Reply requested. Reply?
when you press Yes at the end of the message.
Note!
PtorersesplSye, npdreasgsaNino.toereply. If you do not want
U
4 Select On or Off.
s
Reading the message later
l
Receiving SMS messages
Press No whenayou see the question New Message. Read
c
i
When you receive an SMS message, the phone alerts you
and the message New Message. Read now? appears in
the display. The number from which the SMS message
originated also appears.
now?
r
The message is saved and an envelope icon appears on
theestandby screen. If you want to read the message, you
m
can retrieve it from the SMS Inbox menu.
means an unread message.
m
Reading the message at once
1 Press YES when you see the question New Message.
o
means that the message is saved on the SIM card.
C
Read now? If you press Yes, you will either enter the
r
more than one new messagte. Select the message that
Saving incoming SMS messages
Incoming SMS messages are saved in the phone memory.
When the phone memory is full, incoming SMS messages
message or enter a list of new messages, if there is
fo
you want to read.
o
2 Scroll through the message by tilting the joystick up or are saved on the SIM card. Messages that you have saved
N
down. An arrow in the bottom right-hand corner of the on the SIM card remain there until you delete them.
display indicates that there is more text in the message.
All parts of a long message may not be received at
64
Messaging
Saving from an SMS message
Deleting a message
When the phone number, picture, animation, or melody is There are two ways to delete a message:
highlighted, press Select to save the item.
1 Select Delete Msgs. in the list of options. You can
•
•
•
A picture or animation is saved in My Pictures.
A melody is saved in My Melodies.
delete all read messages, all unsaved messages, or all
messages.
A phone number is saved in the Unsaved Numbers 2 In the SMS Inbox menu, scroll to a message and press
list. When you are adding a new contact, you can C to delete the message.
access this list by pressing
A WAP address is saved in Bookmarks.
e
s
.
U
Replying to a message
•
l
1 Select Reply in the list of options.
a
2 Select the wayiyou want to reply to the message:
c
List of Options
When you select a message in the SMS Inbox by pressing
Select, you can see the following list of options by
pressing
•
•
enter a new message
r
a reply
e
include the message you want to reply to and enter
m
: Delete, Reply, Chat, Forward, Save, Call, m•
use a template and enter a reply.
Read Next.
3 Enter your reply and press OK to send the message.
o
C
You can also reach a list of options in the Unsent
Note!
Forwarding a message
1 Select Forward in the list of options.
2 You can now edit the message.
3 Enter the recipient’s phone number or tilt the joystick
to the left to retrieve the number from the phonebook
or the call list. Press OK to send.
r
or Sent items menus, by pressing
after
fo
selecting a message. Options vary according
t
to the type of item hoighlighted.
N
Messaging
65
Saving a received message
Saving a picture found in a message
Select Save in the list of options.
1 Select the highlighted picture.
The message is saved on the SIM card. Messages that are 2 Select Save Picture. You can select where you would
saved on the SIM card remain there until you delete them.
like to save the picture, with in My Pictures or in
My Animation.
Calling the sender of a message
Select Call in the list of options.
Saving a melody found in a message
e
1 Select the highlighted melody icon.
s
To call a phone number found in a message,
press the left softkey twice when the number is
highlighted.
2 Select Save Melody. The melody is saved in the
Note!
U
My Melodies list. When the melody is highlighted,
it will automatically play. To set the melody as your
ring sound, see “Ring sounds and melodies” on
l
a
i
c
r
page 35.
e
Sending a message to an email address or
phone number found in a message
1 Select Mail to in the list of options.
2 Enter a message.
m
Message Alert
m
You can choose the signal you want to hear when you
receive a message. You can choose between clicks, tones,
or silent.
o
3 Press OK again to send the message.
C
Saving a phone number found inra message
Select Save from Msg. in the list of options.
Setting the message alert
1 Scroll to Settings, Sounds & Alerts, Message Alert.
2 Select an alert.
fo
The number is saved on the StIM card. Phone numbers
delete them.
o
that are saved on theNSIM card remain there until you
66
Messaging
•
•
•
To reject a Chat message, press No. The rejected Chat
message is saved in the SMS Inbox in the Messages
menu.
Chat
Chat works in the same way as Chat on the Internet.
You can initiate a Chat session or you may be invited
to participate in a Chat session.
If you receive a new Chat message while another Chat
session in ongoing, you can end the ongoing session
and start the new one.
Starting a Chat Session
1 Scroll to Messages, Chat, Start Chat.
2 Enter the recipient’s phone number or tilt the joystick
to the left to select a contact from your phonebook.
3 Write your message.
e
Add a nickname to your Chat messages (and SMS
s
message). Scroll to Messages, Chat, Nickname, store
U
a nickname that willl appear with every Chat message
that you send.
c
r
a
i
4 Press OK.
Email
Receiving a Chat Session Invitation
When you receive a Chat session invitation, the phone
beeps and the message Chat Message, Chat Now?
e
You can use the email function in your phone to
semnd and receive e-mail messages. Before using
m
the email program, make sure you have created
a data account, an email account and specified which
email account to use. You must also have a subscription
that supports data transmission.
appears.
o
•
•
•
•
To read the Chat message, press Yes.
Write your chat message reply, press OK.r
C
fo
To resume a Chat session, scroll to Messages, Chat,
To suspend a Chat session, press Cancel.
t
Contact your network operator
or service provider for the default
settings that will work with your
specific service.
Note!
o
Resume.
N
•
To end a Chat session, press End.
Messaging
67
Sending and Receiving
•
•
WithAttachment
See “Pictures” on page 34.
The Send & Receive option in the Email menu offers the
fastest way for you to check for new email messages and
send email messages saved in your Outbox.
Save to outbox
The message is saved in the Outbox. All email
messages in the Outbox are sent when you select the
Send & Receive option in the Email menu.
Writing and Sending
e
If you compose an email message and do not send it, it is
To write and send new email messages
1 Scroll to Messages, Email, Compose.
2 Select To:. You can:
s
saved in the Drafts foUlder. You can open these messages,
edit them and send them, at any time.
l
a
•
select Add name:. Enter a name and e-mail address.
i
Receiving and Reading
c
•
tilt the joystick to the left to enter the phonebook and
retrieve a saved e-mail address.
r
1 Scroll to Send & Receive. Your email messages are
downloaded from the server.
e
3 If you want to send a copy of the message to someone, m
m
2 Scroll to Email Inbox.
select Cc: and select the address as above.
4 If you want to set a priority other than Normal to the
3 Select the email message you want to read.
o
message, scroll to Priority. Select High or Low.
The phone can save up to six complete email
messages. All your email messages are saved
on your email server.
Note!
C
5 Select Subject:. Enter a title.
This is mandatory.
r
fo
6 Select Text:. Enter your message.
t
7 Select one of the following:
You may not be able to see all your new email messages
at once, since the memory capacity of the Inbox is
limited. An arrow in the top or bottom right corner,
indicates that there are more email messages on the server.
To retrieve more email messages, scroll to the arrow.
o
•
Send Now
N
The message is sent at once.
68
Messaging
Replying
WAP
1 Open the email message you want to reply to.
WAP (Wireless Application Protocol) is a global
standard for advanced mobile services, for
example, mobile Internet communication,
mobile e-commerce, and telephony services. WAP allows
you to access certain services on the Internet such as
2 Place the cursor in the text and press
of options.
3 Select Reply or Reply all.
4 Write a message.
to view a list
e
banking services, news, and reservation services from
Deleting
s
your mobile phone.
1 Go to the Inbox and select the email message you want
to delete.
2 Press C.
U
l
a
In order to access WAP services, you need
a subscription that supports data transmission
Note!
i
c
r
Archiving
and WAP browsing.
e
You can archive an email message in order to read it later
or if you want to save important information. You can
only archive as much text as the display shows.
m
Before you start using the WAP browser, make sure you
have created a data account, entered the WAP profile
settings and selected a WAP profile. For fast and efficient
browsing, try the General Packet Radio Service (GPRS)
as the access type.
m
o
C
Archiving an email message
1 Open the email message with the text you want to
r
archive.
fo
t
2 Make sure the text that you owant to archive is visible in
N
If you answer an incoming voice call while
a WAP session is active, your WAP session
will end. You can initiate a new WAP session
once the voice call ends.
Note!
the display.
3 Place the cursor in the text and press
of options.
to view a list
4 Select Copy to arch. The text can now be found in
Archive under the Email menu.
WAP
69
which email account you want to use when sending and
Before you start
First make sure that you have:
•
•
A phone subscription that supports data transmission.
The settings may already be entered when you
buy the phone, or you can receive the settings
from your network operator or your Internet
Note!
Set your phone for mobile Internet, WAP, or email
messaging, see “Setting Up Mobile Internet” on
page 56.
service provider. Yoeu can also receive settings
s
See “Email” on page 67 for more information
about email set-up and messaging.
Note!
U
l
Data Account Settings
The main setting for a data account is the access type
(connection method). You can choose between two
a
i
In order to browse via WAP or use the email program in
your phone, you must enter settings for a data account in
your phone. The settings specify all the information your
phone needs to communicate with a certain server on the
c
r
acceess types:
m
•
GPRS (General Packet Radio Service) data
GPRS allows you to be always online, yet pay
only for the amount of data transmitted and
m
Internet, for example, the address of that server. You can
o
have several data accounts saved in your phone, with
different settings for different purposes. ForCfast and
not for the time you are connected. You need
a subscription that supports GPRS. Please contact your
network operator for charging and subscription details.
efficient access, try the General Packet rRadio Service
(GPRS) as the access type.
fo
In order to browse via WAP, you also need to enter
t
•
DialUp connection data
Normally, you pay for the time you are connected.
o
settings for a WAP profile and select which WAP profile
N
In order to use the email program in your phone, you also
need to enter settings for an email account and select
you want to use when browsing.
Your service provider may provision your WAP
settings so they are not viewable on your phone.
Note!
70
WAP
Creating a data account
1 Scroll to Settings, Data comm., Data accounts,
Add account.
2 Enter a name for the data account.
3 Select an access type.
4 Enter the settings that you have received from your
operator.
For GPRS: access point name (APN), user id, and
password.
User id – your user id to log on to the external data
network.
Password – your password to log on to the external data
network.
Passwd. request (Password request) – if this setting is
on, you are asked for a password eeach time you log on to
the external data network.
s
U
Allow calls – if you want to allow incoming
For DialUp Connection: phone number, user id, and
password.
Confirm each setting.
l
calls during a GPRaS session, select ON. If not,
i
IP addressr– the IP address that the phone uses when
commuenicating with the network. If you do not enter a
select OFF.
c
5 Scroll to Save?.
m
value, the network provides you with a temporary IP
Entering additional settings for a data account
1 Scroll to Settings, Data comm., Data accounts.
address.
m
o
2 Select a data account.
3 Press Edit.
4 Select the setting you want to edit. Edit the setting.
5 Repeat step 4 for all the settings you want to edit.
DNS Address (Domain name server) – the name that the
C
server translates into a number.
r
Basic settings (Basic settings) – these are optional.
Consult your network operator.
fo
t
o
Settings for GPRS
APN – the address of the external data network you want
to connect to, either an IP address or a text string.
Your service provider may provision your WAP
settings so they are not viewable on your phone.
Note!
N
WAP
71
Settings for DialUp Connection
Phone Number – the phone number of your Internet
service provider.
Selecting a preferred service
1 Scroll to Settings, Data comm., Preferred Srvc.
2 Make your selection.
User id, Password, Passwd. request. Same as for GPRS
above.
To see the status of GPRS coverage and
connection, press the upper or lower side
Note!
Data rate – select the speed you want for
the connection.
volume key from standby to enter the Status
e
menu and then scroll to GPRS.
s
U
To check howamuch data you have sent and received,
Dial type – select analog or ISDN connection.
Data Counters
l
If you want to change access type, you have to create
a new data account and select the access type you want
to use.
i
using GPRS, scroll to Call Info, Data Counters, Last
c
r
Session or Total Data.
e
m
Data Settings
Using the WAP browser
If you have selected GPRS as the access type, the
m
o
Preferred service should be set to GPRS&DialUp. An icon
may then appear in the display telling you thCat GPRS is
Starting to browse
1 First select the WAP profile you want to use.
2 Scroll to Browser.
3 Select one of the following (dependent upon your
service provider):
Open your homepage.
within range. See “Icons” on page 88. Irf you have
selected DialUp Conn. as the access type, you should
fo
select DialUp Only as the preferred service. This setting is
t
o
valid for all data accounts.
N
•
72
WAP
•
•
Go to one of your bookmarks. Select Bookmarks.
The options menu always contains the following:
Enter the address of a WAP site. Select Enter Address,
New Address. Enter the WAP address or select one
of the 10 latest entered addresses.
•
Mobile Internet – Go to the homepage set for the
current WAP profile.
•
Bookmarks – Add the site you are currently browsing
to your list of bookmarks, or see the list of bookmarks
When you enter a WAP address, the normal
http:// prefix is not needed. You do however
need to enter a prefix to use protocols, such as
ftp:// or https://.
Note!
for the current profile.
e
•
•
•
Enter address – Enter the WAP address of a site you
s
want to visit.
Send as link – Saend a link to the current site to another
U
l
i
Exiting WAP
Press and hold the right softkey to exit and disconnect.
Remain connected? appears. Confirm your selection.
phone.
c
•
r
Reload – Refresh the contents of the WAP page.
e
• m
Go To Menu – go back to the WAP services menu
in order to access other phone menus. The connection
to the Internet is not interrupted. When you want
•
If you want to leave the browser temporarily but stay
online, press and hold YES and select Go to menu.
m
o
to start browsing again, scroll to Browser, Resume.
Options when browsing
C
•
•
Exit – Go to standby or disconnect.
When you have started browsing, you can reach different
r
Status – Display the current status, for example,
how long you have been browsing.
browsing options by pressing
fo
The Options menu is dynamic. Its content may vary
depending on which WAP site you are visiting.
N
.
t
o
•
New homepage – Set the current site as the
homepage of the WAP profile you are using.
WAP
73
Using bookmarks
You use bookmarks in your mobile phone just as you do
with a PC Internet browser.
WAP push messages
You can receive push messages via WAP Services. This
means that a service provider sends WAP content to your
phone without you having to do anything. You can, for
example, get updated news or new WAP settings from
your service provider.
Working with bookmarks
1 Scroll to Browser.
2 Select the bookmark you want.
3 Select one of the following options:
e
There are two kinds of push messages:
s
•
•
Go to – Go to the marked WAP site.
Edit Bookmark – Edit the name and/or
the WAP address of the bookmark. See
“Options when browsing” on page 73 for
more information.
•
•
SMS messages that inform you about WAP services,
by sending a link. To go to the WAP service, click the
U
l
a
i
link.
c
Updated information from a WAP service is sent to
appear in the WAP browser.
r
e
•
•
Delete – Remove the bookmark.
m
Send as link – Send as link to the current site. m
Receiving a push message
You can set your phone to either accept or reject push
messages. This is valid for all your WAP profiles.
o
Clearing Cache
C
previously visited WAP pages. You may, for example,
You can clear the cache memory whichrcontains
Setting push message acceptance
1 Scroll to Browser, WAP Settings, Common, Push
Access.
want to clear the information on your transactions.
fo
t
1 Scroll to Browser, Clear Cache.
o
2 Select one of the following settings:
2 Empty Cache? appears.
N
•
On – You allow push messages to be automatically
loaded.
•
Off – You do not allow push messages.
74
WAP
Responding to a push message
When you receive a push message, it comes to the Push
Inbox.
Saving mobile Internet information in your
phone
1 Scroll to Browser, WAP Settings, Common.
2 Select the information to save.
•
Scroll to Browser, Push Inbox, and select one of the
following:
Check with your service provider for more
Note!
•
•
Postpone – Save the message, to be loaded later.
Load – The browser starts and loads the WAP site
so that you can see the push content.
information regarding security certificates.
e
It is advisable to clear anyUsensitive information about
s
previously visited WAlP services. This is to avoid
•
Delete – Deletes the push message.
a
i
a security risk if your phone is misplaced, lost, or stolen.
c
r
Stored information
The following information can be saved in your phone:
e
m
•
•
•
•
Cache – Information which is regularly used to
improve frequent memory access.
Passwords – Information for certain Internet serveor
m
C
access.
r
Cookies – Information deposited frfomoInternet servers
to improve frequent access.
t
Push – Information received from services.
o
N
WAP
75
One number
Information Transfer and
Exchange
If you have a SIM card that does not support separate fax
and data numbers, the phone does not recognize the type
of incoming call.
If you want to receive a fax or data call, you have to set
the phone to one of these options. Once you have set your
Fax and data calls
phone for a specific incoming call, it stays like this until
e
Sending fax and data calls
s
you change it.
To send fax and data calls you need to connect your phone
to a computer, and then start the appropriate software
program.
U
1 To select the call type you want your next incoming
l
a
call to be, scroll to Settings, Call Manager, Next Call.
i
2 Select the call type you want (Voice, Data, or Fax) and
c
Receiving fax and data calls
r
confirm your choice.
3 Connect your phone to the computer.
e
The procedure of receiving fax and data calls depends
on your network and subscription. If you have separate
numbers for voice, fax and data calls, your phone will
m
4 Answer the call from within the program.
m
recognize the type of call.
o
Once you have set your phone for a specific
incoming call, it remains set until you change it.
Note!
C
Receiving a fax or data call (separate numbers)
r
2 Answer the call from withitn the software program
N
1 Connect your phone to a compfuteor.
(if it does not answer automatically).
o
You cannot answer a fax or data call manually.
Note!
76
Information Transfer and Exchange
Using the snooze function
More Features
If you want to temporarily turn the alarm off so it will
sound again in approximately nine minutes, press No
when prompted with Turn off alarm?
Alarm clock
The alarm can be set to ring at a specific time within 24
hours, or recurrently at a specific time on several days.
You can have both these alarms set at the same time.
Even if you have set your phone to silent or if your phone
is turned off, the alarm and timer signals ring.
Canceling the alarm
Scroll to Extras, Alarm and Timer, Alarm Clock, Cancel.
e
s
Setting a recurrent alarm
U
Scroll to Extras, Alarm and Timer, Alarm Clock,
l
a
Setting an alarm
Recurrent Alarm. Then enter the time and select when
i
1 Scroll to Extras, Alarm and Timer, Alarm Clock, One- you want the alarm to recur by scrolling and pressing
Time Alarm.
2 Enter the time.
c
r
.
e
m
Selecting an alarm signal
Scroll to Settings, Sounds & Alerts, Alarm Sound. Select
Changing the alarm time
1 Scroll to Extras, Alarm and Timer, Alarm Clock, One-
Time Alarm, New Time:.
2 Enter the time.
m
o
a signal.
C
r
fo
Turning the alarm off
Press any key to turn the alarm signal off when it rings.
t
o
If you do not want the ala
when prompted with Turn off alarm?
N
rm to be repeated, press YES
More Features
77
Stopwatch
Calculator
The phone has a built-in calculator, which can add,
subtract, divide, and multiply. You can access your
calculator by scrolling to Extras, Calculator.
Scroll to Extras, Stopwatch.
•
To start, stop or restart the stopwatch, press the left
softkey.
•
•
Press C to delete the figure.
•
•
To save up to nine lap times, press Lap.
You can scroll through the selection bar at the bottom
e
To reset the stopwatch, press Reset.
of the display by tilting the joystick to the left or right.
s
The options are +, -, X, /, %, ., and =. Select an option
U
The stopwatch is turned off when you answer
an incoming call or when you exit the
stopwatch menu.
Note!
by using the center push key or by pressing Select
when the option is highlighted.
l
a
i
When cyou press
r
•
, you have options including
storing and retrieving numbers from memory, π,
e
Timer
m
or add/subtract.
The phone has a built-in 24-hour countdown timer which
m
replaces the clock when it is set.
o
•
•
To set the timer, scroll to Extras, Alarm and Timer,
C
Timer. Enter the hours, minutes, and seconds. When
r
the signal rings, press any key ftooturn it off.
t
To enter a new time, scroll to Extras, Alarm and Timer,
o
Timer, New Time:. Enter the hours, minutes, and
N
seconds.
78
More Features
2 Synchronization using WAP:
Synchronization
You can synchronize the calendar and contacts in your
phone with the calendar and contacts in your PC. To do
this, you first need to install on your PC the
The first time you want to synchronize your phone
with your Internet calendar or phonebook you must
choose settings for this, see “Internet Calendar
Synchronization” on page 82.
synchronization program found on the Sony Ericsson
Mobile Internet website (www.SonyEricsson.com).
If you have an Internet calendar or phonebook, you can
also synchronize that with your phone calendar and
contacts, using WAP.
Starting the synchronization
e
1 Scroll to Extras, Synchronization, Synchronizing.
s
2 Select the synchronization method you wish to use.
U
l
a
Synchronization Sound
i
You can select whether you want the phone to make
c
Starting the Synchronization
To synchronize using a data cable, you start the
synchronization from your PC.
r
a soundewhen the synchronization is finished.
m
Turning the synchronization sound on or off
1 Synchronization using your data cable:
m
1 Scroll to Extras, Synchronization, Sound.
o
The process for starting synchronization diffeCrs
2 Select On or Off.
according to how your computer is configured.
r
Calendar
You can purchase a data cable from
Note!
fo
United States. For moore information on
You can use the calendar to keep track of important
meetings that you need to attend, phone calls that you
need to make, or tasks that you need to do.
t
N
purchasing Sony Ericsson branded or Ericsson
branded accessories, see “Ordering
Accessories” on page 87.
Synchronization
79
Appointments and tasks
To set the time zone for a meeting:
You can save up to 200 appointments and tasks in your
calendars, depending on the size of each item. You can
choose to add a new appointment or task, or to use an old
appointment or task as a template by copying and
editing it.
•
•
Select Time zone.
Select a time zone in which the meeting is to be
held. Your meeting time will be adjusted
automatically according to the time zone you are in.
5 Confirm with Save and close.
•
•
Appointments: meetings, vacation, phone call.
e
s
Adding a new task
Tasks: make a phone call, send a message, pay bills.
U
1 Scroll to Extras, Calendar, Add Task.
2 Select a category,. (If the category is a phone call, enter
l
Adding a new appointment
a
the phoneinumber.)
1 Scroll to Extras, Calendar, Add apptmt.
2 Enter the appropriate information, for example, class,
location, icon, and times. Confirm each entry.
3 If you want to set a reminder for your appointment,
select a reminder.
c
3 Enter a subject.
r
e
4 If you want to set a reminder for your appointment,
select a reminder.
m
m
Viewing your calendar
o
4 A list of options appears.
If the appointment is recurring:
To view your calendar content, scroll to Extras, Calendar
and then select one of the following:
C
r
•
•
Select Recurrent app.
•
View Today – All appointments for today as well as
incomplete tasks are shown.
View All Tasks – This shows all your entered tasks.
fo
Select the recurrence yotu want.
To change the class for your appointment:
o
•
•
•
Select Class.
N
Scroll to the task you want to view. Press
options for the task.
to see
Select the Class you want.
80
Synchronization
•
•
View Week – Move within and among the days by
moving the joystick. Press Select to view a certain
day.
View Month – Move within and among the weeks by
moving the joystick. Press Select to view a certain
day. Days on which you have appointments are
marked in bold.
•
•
Reminders – Select Always if you want the
reminder to sound even though the phone is
turned off.
Profile Switch – If you want the phone to remind
you to switch profile when a meeting is about to
start, select On. If you want the profile to be
switched automatically, select Auto, then select
e
a profile.
s
In the monthly and weekly views, you can go
to next week by pressing 3, to next month by
pressing 6 and to next year by pressing 9.
You can go back a week, a month or a year
by pressing 1, 4, and 7 respectively. To reach
the current day, press C.
•
Delete All – Deletes all appointments and tasks
in the calendar.
Note!
U
l
a
i
You can chreck when you last synchronized your calendar
or how emuch space is left for new appointments and tasks
Checking the status
c
m
To check the status, scroll to Extras, Calendar, Options,
m
Calendar settings
Memory Status.
Select Options from the Extras, Calendar menu aond
C
•
then select one of the options:
To delete all appointments and tasks in your
calendar, select Delete All in the Options menu.
Note!
r
Status – Use this to check whenfyoou last
•
synchronized your calendar, thow much space is left
for new appointments and tasks.
o
the private calendarNentries, only the public ones
•
Class View – you can choose whether to see only
or both.
Synchronization
81
5 Select Synch URL.
Enter the Internet address of the Internet calendar and
phonebook.
Internet Calendar Synchronization
Via WAP you can synchronize your mobile phone calendar
or contacts with a calendar or phonebook on the Internet.
To do this you must have:
6 Select Calendar path.
Enter the Internet address, user id, and password for
your calendar on the Internet.
•
an Internet calendar and phonebook program.
Contact your operator for more information about the
program. You need a user id, password, and Internet
address for the calendar and phonebook.
7 Select Phonebook path.
e
Enter the Internet address, user id, and password for
s
your phonebook on the Internet.
U
•
a WAP profile set in your mobile phone. For
information on how to set a WAP profile, see “WAP
profile settings” on page 58.
l
Your phocne has several games that you can access by
scrolling to Extras, Games. You can control the games
using your joystick and the keys on your keypad. The
a
i
Games
r
e
Making the WAP synchronization settings
1 Scroll to Extras, Synchronization, SyncServerSett.
2 Select WAP Profile.
m
help text for each game will provide you with key
functions.
m
o
In the list of WAP profiles, select the oneCyou want to
use for synchronization.
r
3 Select Server User ID.
Enter your user id for the Internet calendar and
fo
t
phonebook.
o
4 Select Server Pwd.
N
Enter your password for the Internet calendar and
phonebook.
82
Synchronization
To edit your PIN, scroll to Settings, Locks, SIM Lock,
Change PIN.
Security
SIM card lock
If the message Codes do not match appears,
you entered the new PIN incorrectly. If the
message Wrong PIN appears, followed by
Note!
The SIM card lock protects your subscription, but not
your phone itself, from unauthorized use. If you change
SIM cards, the phone still works with the new SIM card.
Old PIN:, you entered your old PIN incorrectly.
e
s
Most SIM cards are locked at the time of purchase. If the
SIM card lock is on, you have to enter a “PIN” (Personal
Identity Number) every time you turn on your phone.
To edit your PIN2, scroll to Settings, Locks, SIM Lock,
U
Change PIN2.
l
a
i
1 Scroll torSettings, Locks, SIM Lock,
If you enter your PIN incorrectly three times in a row, the
SIM card is blocked. This is indicated by the message PIN
blocked. To unblock it you need to enter your “PUK”
(Personal Unblocking Key). Your PIN and PUK are
Turning the SIM card lock on or off
c
e
2 mSelect On or Off.
Protection.
supplied by your operator.
m
3 Enter your PIN.
o
C
Unblocking your SIM card
1 PIN Blocked appears in the display.
2 Enter your PUK.
Phonelock
r
The phonelock protects the phone against unauthorized
use if it is stolen and the SIM card is exchanged. It is not
on when you buy the phone. You can change the
phonelock code (0000) to any four- to eight-digit personal
code. The phonelock can be set to on, automatic or off.
fo
3 Enter a new four- to eight-digit PIN.
t
o
4 Re-enter the new PIN to confirm.
N
Security
83
Phonelock on
Troubleshooting
If the phonelock is on, the message Locked appears each
time you turn on the phone. You have to enter your code
to use your phone.
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but most of
the problems you can easily correct yourself.
Automatic
If the phonelock is set to automatic, you do not need to
enter your phonelock code until a different SIM card is
inserted in the phone.
e
The phone cannot be switched on
s
Recharge or replace the battery. See “Installing Your SIM
U
Card” on page 14.
l
To edit your phonelock code, scroll to Settings, Locks,
Phonelock, Change Code.
a
i
The furnction or service may be dependent on
Cannot Access a Certain Function
c
e
It is important that you remember your new
code. If you forget it, contact your local Sony
Ericsson retailer.
Note!
your SIM card or the network. Contact your
m
network operator.
m
o
Cannot Receive Any Calls
Setting the phonelock
C
•
•
You may have forwarded your incoming calls to
another phone number. To cancel the Forward calls,
see “Forwarding calls” on page 47.
1 Scroll to Settings, Locks, Phonelock, Protection.
r
2 Select an alternative.
3 Enter the phonelock code. t
N
fo
You may have set the Accept Calls option to From no
one or From list. Select From all. See “Accept calls”
on page 53.
o
84
Troubleshooting
•
•
You may have selected Fax or Data as the next
incoming call. Select Voice. See “Receiving calls” on
page 24.
Gray menu options
Gray text indicates a function that is temporarily
unavailable, for example due to your
turned on or if the features is not supported by the local
network.
You may have set Allow calls to Off for a data account.
Select On instead. See “Data Account Settings” on
page 70. If you still cannot receive incoming calls, it
could be due to network limitations.
e
Display Frozen
s
If your phone does not respond to any key presses,
U
10 seconds to turn aoff your phone. Press and hold
No indication of charging
it may be frozen. Press and hold the
key for about
l
When you start charging a battery that is empty or a battery
that has not been used for a long time, it may take up to
30 minutes before the battery icon appears in the display.
i
the
key briefly to turn your phone on again.
c
r
Emrror messages
e
Menu language
If the display shows a language that you do not
understand, you can always choose Automatic
(determined by your SIM card). You can easily selecot
English by tilting the joystick to the left, pressing 0 0 0 0,
m
Insert SIM
There is no SIM card in the phone or you may have
inserted it incorrectly. Insert a SIM card. See “Installing
Your SIM Card” on page 14.
C
r
then tilting the joystick to the right. To easily change the
fo
language to the language determined by your SIM card,
tilt the joystick to the left, press 8 t8 8 8, then tilt the
Insert correct SIM Card
The phone is set to work only with certain SIM cards.
Insert the correct SIM card and replace the back cover.
o
joystick to the right.
N
Troubleshooting
85
Emergency calls only
PUK blocked - contact operator
You are within range of a network, but you are
not allowed to use it. However, in an emergency,
some operators allow you to call the international
emergency number 112 or 911. See “Making emergency
calls” on page 23.
You entered your personal unblocking key code (PUK)
incorrectly 10 times in a row. Contact your network
operator or service provider.
Phone locked
The phone is locked. To unlock the phone, see
e
No Network
“Phonelock” on page 83.
U
s
There is no network within range or the received signal is
too weak. You have to move to get a signal that is strong Phonelock code:
enough.
l
Your phone coames with the phonelock code, 0000.
i
See “Prhonelock” on page 83.
You can change it to any four- to eight-digit code.
c
Wrong PIN/Wrong PIN2
e
You have entered your PIN or PIN2 incorrectly. Enter the m
correct PIN or PIN2. See “SIM card lock” on page 83.
Number not permitted
m
The Fixed Dialing function is on and the number you
have dialed is not on your fixed numbers list. See
“Turning Fixed dialing on or off” on page 52.
o
Codes do not match
When you want to change a security code (for example
your PIN) you have to confirm the new code by entering
it again. The two codes that you have entered do not
C
r
Slow charging. Non-approved battery
The battery you are using is not a Sony Ericsson-
approved battery and is charging slowly for safety
reasons.
fo
t
match. See “SIM card locok” on page 83.
PIN blocked/PIN2Nblocked
You have entered your PIN or PIN2 incorrectly three times
in a row. To unblock, see “SIM card lock” on page 83.
86
Troubleshooting
Accessible Solutions/Special Needs
For information on Accessible Solutions for individuals
with special needs call the Sony Ericsson Special Needs
Center at 877-878-1996 (TTY) or 877-207-2056 (voice),
or visit the Ericsson Special Needs Center at:
Assistance, Accessories, and
Accessibility
Technical Assistance/Customer
Service
e
•
•
•
•
United States - 1-800-374-2776
Latin America - +1-305-755-6789
Canada - 1-800-668-2101
s
Internet
U
Visit Sony Ericsson on the internet at:
a
i
Other countries - +1-919-472-7908
c
r
Mobile Internet
e
Visit the Sony Ericsson Mobile Internet at:
Ordering Accessories
You can purchase Sony Ericsson branded or Ericsson
m
m
synchronization software, customer services,
user’s guides, and other useful information.
branded accessories intended for use with this product by:
o
•
•
•
•
C
r
Calling 1-800-374-2776 (US only)
fo
Visiting your local Sony Ericsson or Ericsson retailer.
Calling 1-800-755-6789 (Puerto Rico)
t
o
N
Assistance, Accessories, and Accessibility
87
Icon
Description
Tells you the status of the battery.
Icons
The table below shows icons which may appear in
standby or in the menus.
You have missed an incoming call.
All incoming calls are forwarded to
Icon
Description
Your personal phonebook.
a defined number. e
U
A profile othersthan Normal has been
chosen. The available profiles are Meeting
Handling of text and voice messages.
Handling of call information.
(
), Outdoors, (
) Portable
), lCar (
a
(
), Home (
), and Work ( ).
i
c
Personal settings, profiles, forward calls,
networks, and voice control.
Calendar, synchronization, voice memo,
alarm clock, and other extras.
The ring sound is turned off.
r
e
All signals are turned off, except the alarm
and timer.
The alarm clock has been set and is on.
m
m
Gives you access to WAP services onothe
Internet.
A selection of your most frequenCtly used
You have received an SMS message.
You have received a voice message.
Line 1 is in use for outgoing calls.
Line 2 is in use for outgoing calls.
A Chat session is active
r
functions.
fo
Tells you the strength of the network signal.
Help text.
t
o
N
GPRS is within range.
GPRS is within range and can be used.
88
Icons
Icon
Description
Icon
Description
The keypad is locked.
Another number in the phonebook.
An email address in the phonebook.
An ongoing call.
A voice command has been recorded for
a contact name.
A missed call in the call list.
An answered call in the call list.
A dialed number in the call list.
A group of contacts in the phonebook.
An SMS message has not been read.
An SMS message is saved on the SIM card.
Melody inserted in a message.
You have recorded a vo
e
sice memo.
The appointment is a meeting.
U
iointment is a date.
l
Thce appointment is to travel.
The appa
r
e
The appointment is a vacation.
The appointment is an anniversary.
A miscellaneous appointment.
An all-day calendar appointment.
A recurrent calendar appointment.
m
m
o
You can enter the phonebook by pressing
and holding the joystick to the right.
C
r
A home number in the phofnebook.
o
t
A work number in the phonebook.
o
A reminder is set for a calendar
appointment.
N
A mobile number in the phonebook.
A fax number in the phonebook.
A task in your calendar.
Icons
89
Icon
Description
A task of high priority.
A task of low priority.
The task is to make a phone call.
The task is to write a message.
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo
t
o
N
90
Icons
status 81
view 80
Call 46
missed 24
put on hold 48
reject 24
Index
A
Accessibility 87
Accessories 87
Alarm clock 77
Analog Indicator 18
Answering mode 40
Assistance 87
Call time 46
Chat 64
Conference calls 48
Calling 23, 50
automatic redialing 23
call list 24
end 50
e
l putting conference on hold
s
extracting a participant 49
U
fixed dialing 52
groups 28
speed dialing 26
a
i
50
c
releasing a participant 49
reviewing participants 49
Contacts
r
Calling cards
B
e
choosing card 51
making a call 51
Business cards 55
exchanging 55
m
add 25
copy 41
edit 27
m
o
saving card number 50
C
C
saving number 50
r
Calculator 78
Calendar 79
add a task 80
Calls
Contrast 40
fo
accept 53
t
o
answer 24
D
add an appointment 80
settings 81
N
emergency 23
forward 47
international 23
Data account 70
Data calls 76
Data counter 72
Index
91
G
Display
animation 40
automatic 38
manual 38
Games 82
GPRS 70, 71, 72
Greeting 40
Groups 28
greeting 40
icons 88
light 39
L
Language in display 39
Light 39
Lockse
s
closed user groups 53
conference calls 48
E
Emergency calls 23
Emergency numbers 23
EMS 61
Enhanced Messaging 61
Entering letters
multitap text input 29
T9 text input 31
Error messages 85
Ukeypad 38
phone 83
l
a
i
H
SIM card 83
c
Handsfree 40
r
e
I
M
m
Icons 18
Icons in display 88
Magic word 45
Making calls 21
Melodies
saving from a message 66
Melodies, see Ring sounds 35
Menu language 39
Menu overview 95
Message options 63
Messaging 61
m
o
C
International calls 23
Internet 87
r
F
Fax, sending and recoeiving 76
fo
Items 55
t
Fixed dialing 52
N
K
Forwarding calls 47
From 37
Key sound 37
Keypad lock 38
92
Index
N
Missed calls 24
Mobile Internet 69, 87
bookmarks 74
PIN
changing 83
PIN2
changing 83
Profiles 39
Networks 54
O
browsing 72
options 73
Options Key 19
push messages 74
Mobile Internet settings 56
DialUp Connection 57
email account 60
GPRS data 56
selectineg 39
P
s
PUUK 83
Pause 31
l
Personal ring sound 36
Personal ring sounds 36
Phone views 17
Phonebook 25
memory 27
m
Phonelocok 83
aR
i
c
Reset 33
r
locks 59
e
Ring sounds 35
increasing 36
increasing ring 36
key sound 37
personal 36
manual set up 56
preferred mode 58
receiving in an SMS mes-
sage 56
security 59
WAP profile 58
m
activating/canceling 84
C
r
changing the security code
84
fo
t
S
Pictures 34
o
wizard 56
My shortcuts 38
Safety Guidelines 5
Settings
exchanging 35
N
saving from a message 66
profiles 39
Index
93
T
Shortcuts 38
SIM card
before voice dialing 41
dialing 42
editing voice commands 45
magic word 45
T9 Text Input 31
Technical Assistance 87
Time settings 37
advanced settings 38
set date 38
copy contacts 41
unblocking 83
SIM card lock 83
activating/canceling 83
SMS
deleting messages 65
forwarding messages 65
SMS messages
insert object 62
save 65
recording voice memos 44
rejeect 43
s
set time 37
tips 43, 46
Voice dialing 42
Voicemail 46
U
Timer 78
TTY Phone Number 87
Turn the phone on/off
l
a
i
c
r
animation 21
e
W
greeting 21
WAP, see Mobile Internet 69
m
networks 21
m
PIoN 21
send 61
templates 65
write 61
C
rTwo voice lines 50
Softkeys 19
Special Needs 87
fo
V
t
Vibrating alert 37
Voice answering 43
Voice control 41
answering 43
o
Speed dialing 26N
Stopwatch 78
94
Index
Menu Overview
Phonebook
(page 25)
Call Contact
Add Contact
Edit Contact
Business Cards Email
SIM Card
Groups
Calling Cards
Fixed Dialing
Special Numbers
Contact Mngr.
Memory Status
Messages
(page 61)
Call Info
(page 24)
Settings
(page 37)
Extras
Browser
(page 56)
Mobile Internet Shortcut Help
Bookmarks
My Shortcuts
(page 38)
(page 77)
Voice Memo
Calendar
Call Voicemail Missed Calls Sounds &
SMS
Chat
Call List
Call Timers
Call Counters Call Manager
Clear Call
Lists
Alerts
Profiles
e
Synchronization Push Inbox
s
Alarm and TimeUr Enter Address
Time and Date Stopwatch
Display
Voice Control
Language
Resume
l
Calculator
Select Profile
Clear Cache
WAP Settings
(configured by
your service
provider)
a
Games i
Pictcures
r
Ongoing Call*
Turn Off Tones Locks
Hold Call Networks
Switch Calls Data Comm.
Release Active Master Reset
e
Accessories
m
m
o
Join Calls
C
Transfer Call
r
t Call Info
Release All
fo
* Only available during a call
o
N
Additional menus are network- and subscription-dependent.
T62u Quick Card
My Shortcuts Menu
Turn Phone On/Off
Press and hold the power key.
Make a Call
Enter the number and press Call.
The My Shortcuts menu allows you to
customize the settings you use most
often.
Scroll Through Menus
e
Answer Call
Press Answer.
End Call
Press End.
Tilt the joystick to the left or right.
s
U
Quick Access to Menus
Enter the number of the menu you want
to reach.
l
a
i
Call Numbc
rer Shown in Display
Emergency Calls
Press Call.
e
Enter your local emergency number and
press Call.
Enter the Call List
m
Press Call List.
m
Website
Redial Last Dialed Number
o
Press Call List then Call.
C
Technical Support
r
Move through lists
United States - f1-8o00-374-2776
Tilt the joystick up or down.
Latin America - +1-305-755-6789
t
Canada - 1-800-668-2101
o
Delete an item
Press and hold C when in lists.
Other countries - +1-919-472-7908
N
Select a menu or setting
View the status screen
Press Select or press center push key.
Press the upper or lower side volume
key from standby.
Go back to standby
To access the first item in My Shortcuts
Press and hold Back.
Tilt and hold the joystick to the left.
Turn on Voice Dialing
Press and hold the upper or lower side
volume key.
e
See today’s date
s
Press the upper or lower side volume
key.
U
l
Call Voicemail
a
Enter the + sigin for international calls.
Press and hold 1.
c
Press and hold 0.
r
Call a contact
e
Turn on silent mode
Tilt and hold the joystick to the right.
Press Options, Turn On Silent.
m
Change Ear Volume (During Call)
Lock keypad
m
Press upper or lower side key
o
Press Options, scroll to Lock Keypad
or press and hold C, select Lock Key-
Mute the microphone
Press and hold C to toggleCon and off.
Change language tfo doefault
Tilt the joystick to the left, press 0000,
tilt the joytstick to the right.
r
pad.
Put a call on hold or retrieve a call
Press Hold during a call.
o
N
AE/LZT 123 7007 R1
AE/LZT 123 7007 R1
|