|
Contents
Sony Ericsson K630i
Contents
This is the Internet version of the user's guide. © Print only for private use.
1
circumstances will Sony Ericsson be liable in any
way for your improper use of additional content
or other third party content.
Bluetooth™ is a trademark or registered trademark
of Bluetooth SIG Inc.
The liquid identity logo, PlayNow, MusicDJ,
PhotoDJ, TrackID and VideoDJ are trademarks
or registered trademarks of Sony Ericsson Mobile
Communications AB.
Sony, Memory Stick Micro™ and M2™ are
trademarks or registered trademarks of Sony
Corporation.
Sony Ericsson K630i
UMTS 2100 GSM 900/1800/1900
This User guide is published by Sony Ericsson
Mobile Communications AB or its local affiliated
company, without any warranty. Improvements
and changes to this User guide necessitated by
typographical errors, inaccuracies of current
information, or improvements to programs and/or
equipment, may be made by Sony Ericsson Mobile
Communications AB or its local affiliated company
at any time and without notice. Such changes will,
however, be incorporated into new editions of this
User guide.
Ericsson is a trademark or registered trademark
of Telefonaktiebolaget LM Ericsson.
All rights reserved.
Adobe® Photoshop® Album Starter Edition
is a registered trademark of Adobe Systems
Incorporated.
ActiveSync, Microsoft, Windows, PowerPoint,
Outlook and Vista are trademarks or registered
trademarks of Microsoft Corporation in the US
and other countries.
T9™ Text Input is a trademark or a registered
trademark of Tegic Communications. T9™ Text
Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Canadian Pat. No.
1,331,057, United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro.Pat.
No. 0 842 463(96927260.8) DE/DK, FI, FR, IT, NL,
PT, ES, SE, GB; and additional patents are pending
worldwide.
©Sony Ericsson Mobile Communications AB, 2007
Publication number: 1201-1521.1
Please note:
Some of the services in this User guide are not
supported by all networks. This also applies to the
GSM International Emergency Number 112.
Please contact your network operator or service
provider if you are in doubt whether you can use
a particular service or not.
Please read the Guidelines for safe and efficient use
and the Limited warranty chapters before you use
your mobile phone.
Your mobile phone has the capability to download,
store and forward additional content, e.g. ringtones.
The use of such content may be restricted or
prohibited by rights of third parties, including but
not limited to restriction under applicable copyright
laws. You, and not Sony Ericsson, are entirely
responsible for additional content that you download
to or forward from your mobile phone. Prior to your
use of any additional content, please verify that your
intended use is properly licensed or is otherwise
authorized. Sony Ericsson does not guarantee
the accuracy, integrity or quality of any additional
content or any other third party content. Under no
Java and all Java based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
End-user license agreement for Sun™ Java™
J2ME™.
3
This is the Internet version of the user's guide. © Print only for private use.
Restrictions: Software is confidential copyrighted
information of Sun and title to all copies is retained
by Sun and/or its licensors. Customer shall not
modify, decompile, disassemble, decrypt, extract,
or otherwise reverse engineer Software. Software
may not be leased, assigned, or sublicensed, in
whole or in part.
Instruction symbols
These symbols appear in the User
guide.
Note
Export Regulations: Software, including technical
data, is subject to U.S. export control laws, including
the U.S. Export Administration Act and its associated
regulations, and may be subject to export or import
regulations in other countries. Customer agrees
to comply strictly with all such regulations and
acknowledges that it has the responsibility to obtain
licenses to export, re-export, or import Software.
Software may not be downloaded, or otherwise
exported or re-exported (i) into, or to a national or
resident of, Cuba, Iraq, Iran, North Korea, Libya,
Sudan, Syria (as such listing may be revised from
time to time) or any country to which the U.S. has
embargoed goods; or (ii) to anyone on the U.S.
Treasury Department's list of Specially Designated
Nations or the U.S. Commerce Department's Table
of Denial Orders.
Tip
Warning
A service or function is network-
or subscription-dependent.
Contact your network operator
for details.
>
Use a selection or navigation
key to scroll and select. See
Restricted Rights: Use, duplication or disclosure
by the United States government is subject to the
restrictions as set forth in the Rights in Technical
Data and Computer Software Clauses in DFARS
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2)
as applicable.
Other product and company names mentioned herein
may be the trademarks of their respective owners.
Any rights not expressly granted herein are reserved.
All illustrations are for illustration only and may not
accurately depict the actual phone.
4
This is the Internet version of the user's guide. © Print only for private use.
Getting started
To insert the battery
Assembly
Before you start using your phone,
you need to insert a SIM card and the
battery.
To insert the SIM card
1 Insert the battery with the label side up
and the connectors facing each other.
1 Remove the battery cover.
2 Slide the SIM card forward (1), and
then backwards under the holder (2) -
with the gold-coloured contacts facing
down.
2 Close and slide the battery cover into
place.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
5
your subscription. Always turn off your
phone and detach the charger before
you insert or remove the SIM card.
Turning on the phone
To turn on the phone
You can save contacts on the SIM card
before you remove it from your phone.
PIN
You may need a PIN (Personal
Identification Number) to activate
the services in your phone. Your PIN
is supplied by your network operator.
Each PIN digit appears as *, unless it
starts with emergency number digits,
for example, 112 or 911. You can see
and call an emergency number without
entering a PIN.
1 Press and hold down
2 Select a mode:
• Normal – full functionality.
• Flight mode – limited functionality.
3 Enter your SIM card PIN, if requested
and select OK.
.
If you enter the wrong PIN three times
in a row, the SIM card is blocked. See
4 Select a language.
5 Select Continue > Yes to use the setup
wizard while settings are downloaded.
Flight mode
In Flight mode the network and radio
transceivers are turned off to prevent
disturbance to sensitive equipment.
If you want to correct a mistake when
you enter your PIN, press
.
You can use the Bluetooth™ function
in Flight mode.
SIM card
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
6
Getting started
This is the Internet version of the user's guide. © Print only for private use.
Startup screen
Charging the battery
The startup screen appears when you
on page 40.
The phone battery is partly charged
when you buy it.
To charge the battery
Standby
After you have turned your phone on
and entered your PIN, the name of the
network operator appears. This view
is called standby.
2.5 h.
Help in your phone
Help and information are available
To use the setup wizard
1 From standby select Menu > Settings
> the General tab > Setup wizard.
2 Select an option.
To view information about functions
• Scroll to a function and select Info, if
available. In some cases, Info appears
under Options.
1 Connect the charger to the phone.
It takes approximately 2.5 hours to
fully charge the battery. Press a key
to view the screen.
2 Remove the charger by tilting the plug
upwards.
To view the phone demonstration
• From standby select Menu
> Entertainment > Demo tour.
You can use your phone while it is
charging. You can charge the battery
at any time and for more or less than
2.5 hours. You can interrupt the charging
without damaging the battery.
To view status information
• From standby press the volume key up.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
7
Phone overview
1
1
2
3
4
5
6
7
8
9
Video call camera
Ear speaker
2
Screen
9
Selection keys
Call key
3
4
Activity menu
Navigation key
Keylock key
10
11
12
Volume, digital zoom keys
10 End key
5
6
11 Camera key
12 C key (Clear)
13 Silent key
7
8
13
14
14 Connector for charger,
handsfree and USB cable
8
Getting started
This is the Internet version of the user's guide. © Print only for private use.
15
15 On/off key
16 Camera lens
17 Memory card slot
16
17
Getting started
This is the Internet version of the user's guide. © Print only for private use.
9
Menu overview
PlayNow™*
Internet*
Entertainment
Online services*
Games
TrackID™
VideoDJ™
PhotoDJ™
MusicDJ™
Remote control
Record sound
Demo tour
Camera
Messaging
Media
Write new
Inbox
Email
Web feeds
Drafts
Outbox
Sent messages
Saved messages
My friends*
Call voicemail
Templates
Manage msgs
Settings
Radio
Alarms
Contacts
Myself
New contact
10
Getting started
This is the Internet version of the user's guide. © Print only for private use.
Calls**
Organizer
File manager**
Applications
Video call
Calendar
Tasks
All
Answered
Dialled
Missed
Notes
Synchronization
Timer
Stopwatch
Calculator
Code memo
Settings**
General
Profiles
Sounds & alerts
Ring volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Message alert
Key sound
Display
Wallpaper
Themes
Startup screen
Screen saver
Clock size
Brightness
Edit line names*
Calls
Speed dial
Smart search
Divert calls
Switch to line 2*
Manage calls
Video share*
Time & cost*
Show/hide my no.
Handsfree
Connectivity*
Bluetooth
USB
Time & date
Language
Update service
Voice control
New events
Shortcuts
Flight mode
Security
Setup wizard
Accessibility*
Phone status
Master reset
Phone name
Network sharing
Synchronization
Device mgmt
Mobile networks
Internet settings
Streaming settings
Message settings*
Accessories
* Some menus are operator-, network- and subscription-dependent.
** You can use the navigation key to scroll between tabs in submenus. For more information, see Navigation on
Getting started
11
This is the Internet version of the user's guide. © Print only for private use.
To navigate your media
1 From standby select Media.
2 Use the navigation key to move up,
down, left and right through the menus.
Navigation
The main menus are shown as icons.
Some submenus include tabs.
To navigate the phone menus
To delete items
• Press
to delete items such as
numbers, letters, pictures and sounds.
Shortcuts
You can use keypad shortcuts to go
directly to a menu. Menu numbering
starts from the top left icon and moves
across and then down row by row.
To go directly to a main menu
• From standby select Menu and press
Centre navigation key
–
,
,
or
To use navigation key shortcuts
• From standby press or
.
1 From standby select Menu.
2 Use the navigation key to move through
the menus.
,
,
to go directly to a function.
To scroll between the tabs
• Scroll to a tab by pressing the
navigation key left or right.
To edit a navigation key shortcut
1 From standby select Menu > Settings
> the General tab > Shortcuts.
2 Scroll to an option and select Edit.
3 Scroll to a menu option and select
Shortc.
To view options for an item
• Select Options to, for example, edit.
To return to standby
• Press
.
To end a function
• Press
.
12
Getting started
This is the Internet version of the user's guide. © Print only for private use.
Activity menu
To insert a memory card
The activity menu gives you quick
access to certain functions.
To open the activity menu
• Press
.
Activity menu tabs
• New events – missed calls and new
messages.
• Running apps – applications that are
running in the background.
• My shortcuts – add your favourite
functions to access them quickly.
• Internet – quick access to the
Internet.
• Open the cover and insert the memory
card with the golden contacts facing up.
To remove a memory card
File manager
You can use the file manager to handle
files saved in the phone memory or on
a memory card.
You may have to purchase a memory
card separately.
Memory card
Your phone supports Memory Stick
Micro™ (M2™) memory card adding
more storage space to your phone. It
can also be used as a portable memory
card with other compatible devices.
• Open the cover and press the edge
of the memory card to release and
remove it.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
13
To view memory card options
1 From standby select Menu > Organizer
> File manager > the On memory card
tab.
To view information about files
1 From standby select Menu > Organizer
> File manager.
2 Find a file and select Options
> Information.
2 Select Options.
Handling files
To move a file in the file manager
1 From standby select Menu > Organizer
> File manager.
2 Find a file and select Options > Manage
file > Move.
You can move and copy files between
your phone, a computer and a memory
card. Files are saved on the memory
card first and then in the phone memory.
Unrecognized files are saved in the
Other folder.
3 Select an option.
To copy a file in the file manager
1 From standby select Menu > Organizer
> File manager.
2 Find a file and select Options > Manage
file > Copy.
You can create subfolders to move or
copy files to. You can select more than
one or all the files in a folder at the same
time for all folders except Games and
Applications.
3 Select an option.
If the memory is full, delete some
content to create space.
To create a subfolder in the file
manager
File manager tabs
1 From standby select Menu > Organizer
> File manager.
2 Scroll to a folder and select Open.
3 Select Options > New folder.
4 Enter a name for the folder and select
OK.
The file manager is divided into three
tabs, and icons indicate where the files
are saved.
• All files – all content in the phone
memory and on a memory card
• In phone – all content in the phone
memory
• On memory card – all content on
a memory card
14
Getting started
This is the Internet version of the user's guide. © Print only for private use.
To select more than one file
in a folder
1 From standby select Menu > Organizer
> File manager.
2 Scroll to a folder and select Open.
3 Select Options > Mark > Mark several.
4 For each file you want to mark, scroll
to the file and select Mark.
Entering text
You can use multitap text input or T9™
Text Input
to enter text. The T9 Text
Input method uses a built-in dictionary.
To change text input method
• When you enter text, press and hold
down
.
To shift between capitals and
lower-case letters
• When you enter text, press
To delete a file from the file manager
1 From standby select Menu > Organizer
> File manager.
.
2 Find the file and press
.
To enter numbers
• When you enter text, press and hold
down
Phone language
–
.
You can select a language to use
in your phone.
To enter full stops and commas
• When you enter text, press
.
To change the phone language
1 From standby select Menu > Settings
> the General tab > Language > Phone
language.
To enter text using T9™ Text Input
1 From standby select, for example,
Menu > Messaging > Write new > Text
message.
2 Select an option.
2 If
down
is not displayed, press and hold
to change to T9 Text Input.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
15
3 Press each key only once, even if the
letter you want is not the first letter on
the key. For example, to write the word
Calling
Making and receiving calls
You need to turn on your phone and
be within range of a network.
“Jane”, press
,
,
,
.
Write the whole word before looking
at the suggestions.
4 Use
or
to view suggestions.
To make a call
5 Press
to accept a suggestion.
1 From standby enter a phone number
with international country code and
area code, if applicable.
To enter text using multitap
1 From standby select, for example,
Menu > Messaging > Write new > Text
message.
2 Press
.
2 If
is displayed, press and hold down
to change to multitap text input.
You can call numbers from your contacts
use your voice to make calls. See Voice
3 Press
–
repeatedly until the
desired letter appears.
4 When a word is written, press
to add a space.
To make international calls
1 From standby press
sign appears.
until a “+”
To add words to the built-in
dictionary
1 When you enter text using T9 Text Input,
select Options > Spell word.
2 Write the word using multitap input and
select Insert.
2 Enter the country code, area code
(without the first zero) and phone
number.
3 Press
.
To re-dial a number
• When Retry? appears select Yes.
Do not hold your phone to your ear
when waiting. When the call connects,
your phone gives a loud signal.
16
Calling
This is the Internet version of the user's guide. © Print only for private use.
To answer a call
To switch networks manually
1 From standby select Menu > Settings
>the Connectivity tab>Mobile networks
> GSM/3G networks.
• Press
.
To reject a call
• Press
.
2 Select an option.
To change the ear speaker volume
during a call
• Press the volume key up or down.
Emergency calls
Your phone supports international
emergency numbers, for example, 112
and 911. These numbers can normally
be used to make emergency calls in
any country, with or without the SIM
card inserted, if a 3G (UMTS) or GSM
network is within range.
To mute the microphone during a call
1 Press and hold down
2 Press and hold down
to resume.
.
again
To turn the loudspeaker on during
a call
• Select SpkrOn.
In some countries, other emergency
numbers may also be promoted. Your
network operator may therefore have
saved additional local emergency numbers
on the SIM card.
Do not hold your phone to your ear
when using the loudspeaker. This could
damage your hearing.
To make an emergency call
• From standby enter 112 (the
international emergency number)
To view missed calls from standby
• Press
events tab and select a number.
• Press to open the call list.
and scroll to the New
and press
.
To view your local emergency
numbers
Networks
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers
Your phone switches automatically
between GSM and 3G (UMTS)
networks depending on availability.
Some network operators allow you
to switch networks manually.
> Emergency nos.
Calling
This is the Internet version of the user's guide. © Print only for private use.
17
Video call
Default contact
See a person on the screen during calls.
Both parties need a subscription that
supports the 3G (UMTS) service, and
you need to be within range of a 3G
(UMTS) network. 3G (UMTS) service
You can choose which contact
information is shown as default. If
Phone contacts is selected as default,
your contacts show all the information
saved in Contacts. If you select SIM
contacts as default, your contacts show
names and numbers saved on the SIM
card.
is available when
appears.
To make a video call
1 From standby enter a phone number
with international prefix and area code,
if applicable.
To select default contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Default contacts.
3 Select an option.
2 Select Options > Make video call.
To use the zoom with an outgoing
video call
• Press
or
.
Phone contacts
Phone contacts can contain names,
phone numbers and personal
information. They are saved in the
phone memory.
To view video call options
• During the call, select Options.
Contacts
To add a phone contact
You can save names, phone numbers
and personal information in Contacts.
Information can be saved in the phone
memory or on the SIM card.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Enter the number and select OK.
5 Select a number option.
6 Scroll between tabs and select the
fields to add information.
7 Select Save.
18
Calling
This is the Internet version of the user's guide. © Print only for private use.
Calling contacts
Editing contacts
To call a phone contact
1 From standby select Menu > Contacts.
To add information to a phone
contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options
> Edit contact.
3 Scroll between the tabs and select Add.
4 Select an option and an item to add.
5 Select Save.
2 Scroll to a contact and press
.
To go directly to a contact, from standby
press and hold down
–
.
To call a SIM contact from phone
contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > SIM contacts.
If your subscription supports Calling Line
Identification (CLI) service, you can assign
personal ringtones to contacts.
3 Scroll to a contact and press
.
To edit a phone contact
To call with Smart search
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options
> Edit contact.
3 Scroll between the tabs and select Edit.
4 Edit the information and select Save.
1 From standby press
–
to enter a contact name or a phone
number. All entries which match the
sequence of digits or letters are shown
in a list.
2 Scroll to a contact or a phone number
To edit a SIM contact when phone
contacts is default
and press
.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > SIM contacts.
3 Scroll to the name and number and
select Options > Edit contact.
To turn Smart search on or off
1 From standby select Menu > Settings
> the Calls tab > Smart search.
2 Select an option.
4 Edit the information and select Save.
Calling
This is the Internet version of the user's guide. © Print only for private use.
19
To copy names and numbers to the
SIM card
5 Select a number option and add more
information, if available.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy to SIM.
3 Select an option.
6 Select Save.
When you copy all contacts from your
phone to the SIM card, all existing SIM
card information is replaced.
To automatically save names and
phone numbers on the SIM card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Auto save on
SIM.
To call a SIM contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and press
.
To copy names and numbers to
phone contacts
3 Select an option.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy from SIM.
3 Select an option.
To save contacts on a memory card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Back up to
m.card.
Deleting contacts
To delete a contact
SIM contacts
1 From standby select Menu > Contacts.
SIM contacts can contain names and
numbers only. They are saved on the
SIM card.
2 Scroll to a contact and press
.
To delete all phone contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Delete all
contacts.
To add a SIM contact
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Enter the number and select OK.
20
Calling
This is the Internet version of the user's guide. © Print only for private use.
Sending contacts
Memory status
The number of contacts you can save in
your phone or on the SIM card depends
on available memory.
To send a contact
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options
> Send contact.
To view memory status
3 Select a transfer method.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Memory status.
Make sure the receiving device supports
the transfer method you select.
Synchronizing contacts
To send all contacts
Contacts can be synchronized
with a Microsoft Exchange Server
(Microsoft® Outlook®). For more
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Send all
contacts.
3 Select a transfer method.
Myself
Make sure the receiving device supports
the transfer method you select.
You can enter information about
yourself and, for example, send your
business card.
Sorting contacts
To select the sort order for contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Sort order.
3 Select an option.
To enter Myself information
1 From standby select Menu > Contacts.
2 Scroll to Myself and select Open.
3 Scroll to an option and edit the
information.
4 Select Save.
Calling
This is the Internet version of the user's guide. © Print only for private use.
21
To add your own business card
1 From standby select Menu > Contacts.
2 Scroll to Myself and select Open.
3 Scroll to My contact info and select
Add > Create new.
4 Scroll between tabs and select the
fields to add information.
5 Enter the information and select Save.
To create a group of numbers and
email addresses
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Groups.
3 Scroll to New group and select Add.
4 Enter a name for the group and select
Continue.
5 Scroll to New and select Add.
6 For each contact phone number
or email address you want to mark,
scroll to it and select Mark.
To enter a symbol select Options > Add
symbol > Insert.
To send your business card
1 From standby select Menu > Contacts.
2 Scroll to Myself and select Open.
3 Scroll to My contact info and select
Send.
7 Select Continue > Done.
Call list
You can view information about recent
calls.
4 Select a transfer method.
To call a number from the call list
Make sure the receiving device supports
the transfer method you select.
1 From standby press
and scroll to
a tab.
Groups
2 Scroll to a name or a number and
press
You can create a group of phone
numbers and email addresses from
Phone contacts to send messages to.
also use groups (with phone numbers)
when you create accepted callers lists.
.
To add a call list number to contacts
1 From standby press
a tab.
2 Scroll to the number and select Save.
3 Select New contact to create a new
contact or select an existing contact
to add the number to.
and scroll to
22
Calling
This is the Internet version of the user's guide. © Print only for private use.
To clear the call list
1 From standby press
2 Scroll to the All tab and select Options
> Delete all.
Voicemail
.
If your subscription includes an
answering service, callers can leave
a voicemail message when you cannot
answer a call.
Speed dial
To enter your voicemail number
1 From standby select Menu>Messaging
> Settings > Voicemail number.
Speed dialling lets you select nine
contacts that you can dial quickly.
The contacts can be saved in positions
1-9.
2 Enter the number and select OK.
To call your voicemail service
• From standby press and hold down
To add contacts to speed dial
numbers
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Speed dial.
3 Scroll to a position number and select
Add.
4 Select a contact.
.
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying
their name.
• Activate voice dialling by saying
a “magic word”.
• Answer and reject calls when you
use a handsfree.
To edit speed dial numbers
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Speed dial.
3 Find a position number and select
Options > Replace.
To record a voice command using
voice dialling
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialling > Activate.
To speed dial
• From standby enter the position number
2 Select Yes > New voice comm. and
select a contact. If the contact has more
than one number, select the number
to add the voice command to.
and press
.
Calling
This is the Internet version of the user's guide. © Print only for private use.
23
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes.
If not, select No and repeat steps 3
and 4.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
To make a call with a handsfree
• From standby press the handsfree key.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialling without pressing any keys.
Your handsfree must be connected to
your phone when using the magic word.
To re-record a voice command
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialling > Edit names.
You should choose a long, unusual word
or phrase that can easily be distinguished
from ordinary background speech.
Bluetooth handsfree does not support
this feature.
2 Scroll to a command and select Options
> Replace voice.
3 Wait for the tone and say the command.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To activate and record the magic word
1 From standby select Menu > Settings
> the General tab > Voice control
> Magic word > Activate.
2 Follow the instructions that appear and
select Continue. Wait for the tone and
say the magic word.
To use the caller name
1 From standby select Menu > Settings
> the General tab > Voice control > Play
caller name.
2 Select an option.
3 Select Yes to accept or No for a new
recording.
24
Calling
This is the Internet version of the user's guide. © Print only for private use.
4 Follow the instructions that appear and
select Continue.
6 Follow the instructions that appear and
select Continue.
5 Select where your magic word is to be
activated.
7 Select where your voice answering is
to be activated.
To make a call using the magic word
To answer a call using voice
commands
• Say “Answer”.
1 In standby make sure
is visible.
2 Say the magic word.
3 Wait for the tone and say a voice
command.
To reject a call using voice
commands
• Say “Busy”.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To edit your voice commands
1 From standby select Menu > Contacts.
2 Find a contact and select Options
> Edit contact.
To activate voice answering and
record voice answer commands
3 Select the voice command to edit.
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice answer > Activate.
2 Follow the instructions that appear and
select Continue. Wait for the tone and
say “Answer”, or another word.
3 Select Yes to accept or No for a new
recording.
Diverting calls
You can divert calls, for example,
to an answering service.
When Restrict calls is used, some
divert call options are not available.
4 Follow the instructions that appear and
select Continue. Wait for the tone and
say “Busy”, or another word.
5 Select Yes to accept or No for a new
recording.
Calling
This is the Internet version of the user's guide. © Print only for private use.
25
Divert call options
To activate call waiting
Standard options are:
• From standby select Menu > Settings
> the Calls tab > Manage calls > Call
waiting > Activate.
• Divert always – divert all your calls.
• When busy – if a call is ongoing.
• Not reachable – if your phone is
turned off or unreachable.
• No reply – if a call is not answered
in a specified time.
To make a second call
1 During the call, select Options > Hold.
This puts the ongoing call on hold.
2 Enter the number to call and select
Options > Add call.
To divert calls
1 From standby select Menu > Settings
> the Calls tab > Divert calls.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
To answer a second call
• During the call, press . This puts the
ongoing call on hold.
To reject a second call
• During the call, press
and continue
with the ongoing call.
More than one call
To end an ongoing call and answer
a second call
• During the call, select Replace act. call.
You can handle more than one call at
a time. For example, you can put an
ongoing call on hold, while you make
or answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
Handling two voice calls
You can have calls ongoing and on hold
at the same time.
To switch between two calls
Call waiting
• During the call, press
.
When call waiting is used, you hear
a beep if you receive a second call.
To join two calls
• During the call, select Options > Join
calls.
26
Calling
This is the Internet version of the user's guide. © Print only for private use.
To connect two calls
To have a private conversation
1 During the call, select Options > Talk to
and select the participant to talk to.
2 To resume the conference call, select
Options > Join calls.
• During the call, select Options>Transfer
call. You are disconnected from both
calls.
To end an ongoing call and return
to the call on hold
Two voice lines
• Press
and then
.
If your subscription supports Alternate
Line Service (ALS), you can make separate
calls with different phone numbers.
Receiving a third voice call
You cannot answer a third call
without ending one of the first two
calls or joining them.
To select a line for outgoing calls
1 From standby select Menu > Settings
> the Calls tab.
Conference calls
With a conference call, you can have a
joint conversation with up to five people.
2 Select an option.
To edit the name of a line
1 From standby select Menu > Settings
> the Calls tab > Edit line names.
2 Select the line to edit.
To add a new participant
1 During the call, select Options > Hold.
This puts the joined calls on hold.
2 Select Options > Add call.
3 Enter the number to call and press
4 Select Options > Join calls to add the
new participant.
5 Repeat this task to add more
participants.
.
My numbers
You can view, add and edit your own
phone numbers.
To check your phone numbers
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers
> My numbers.
To release a participant
1 Select Options > Release part.
2 Select the participant to release.
3 Select an option.
Calling
This is the Internet version of the user's guide. © Print only for private use.
27
Restrict calls options
Standard options are:
Accept calls
You can choose to receive calls from
certain phone numbers only.
• All outgoing – all outgoing calls.
• Outgoing intl – all outgoing
international calls.
• Outg. intl roam. – all outgoing
international calls except to your
home country.
• All incoming – all incoming calls.
• Inc. when roaming – all incoming
calls when you are abroad.
To add numbers to the accepted
callers list
1 From standby select Menu > Settings
> the Calls tab > Manage calls > Accept
calls > Only from list.
2 Scroll to New and select Add.
3 Scroll to a contact or select Groups.
To restrict calls
1 From standby select Menu > Settings
> the Calls tab > Manage calls > Restrict
calls.
2 Select an option.
3 Select Activate.
To accept all calls
• From standby select Menu > Settings
> the Calls tab > Manage calls > Accept
calls > All callers.
4 Enter your password and select OK.
Restricted dialling
You can restrict outgoing and incoming
calls. A password from your service
provider is required.
Fixed dialling
Fixed dialling allows calls to be made
only to certain numbers saved on the
SIM card. The fixed numbers are
protected by your PIN2.
If you divert incoming calls, you cannot
use some restrict calls options.
Partial numbers can be saved. For
example, saving 0123456 allows calls
to be made to all numbers starting
with 0123456.
28
Calling
This is the Internet version of the user's guide. © Print only for private use.
Tone signals
You can use telephone banking services
or control an answering machine with
tone signals during a call.
When fixed dialling is used, you cannot
view or manage any phone numbers saved
on the SIM card but you can still call the
international emergency number, 112.
To use fixed dialling
To use tone signals
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers > Fixed
dialling > Activate.
1 During the call, press
or
2 Press
–
,
to send tones.
to clear the screen.
3 Enter your PIN2 and select OK.
4 Select OK again to confirm.
Notepad
You can use the screen as a notepad
to enter a phone number during a call.
To save a fixed number
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers > Fixed
dialling > Fixed numbers > New
number.
To use the notepad
1 During the call, enter a phone number.
2 Press
to call the number.
Showing or hiding your phone
number
You can select to show or hide your
phone number when you make a call.
3 Enter the information and select Save.
Call time and cost
During a call, the duration of the call
is shown. You can check the duration
of your last call, outgoing calls and the
total time of your calls.
To hide your phone number
1 From standby select Menu > Settings
> the Calls tab > Show/hide my no.
2 Select Hide number.
To check the call time
• From standby select Menu > Settings
> the Calls tab > Time & cost > Call
timers.
Calling
This is the Internet version of the user's guide. © Print only for private use.
29
Text messages
Text messages can contain simple
pictures, sound effects, animations,
and melodies.
Messaging
Receiving and saving messages
You are notified when you receive
a message. Messages are automatically
saved in the phone memory. When the
phone memory is full, you can delete
messages or save them on a memory
card or on the SIM card.
Before you use messaging
You must have a service centre number.
The number is supplied by your service
provider and is usually saved on the
SIM card. If the number to your service
centre is not saved on your SIM card,
you must enter the number yourself.
To save a message on a memory
card
• From standby select Menu>Messaging
>Settings>General>Save to>Memory
card.
To enter a service centre number
1 From standby select Menu>Messaging
> Settings > Text message and scroll to
Service centre. The number is shown if
it is saved on the SIM card.
2 If there is no number shown, select Edit.
3 Scroll to New ServiceCentre and select
Add.
To save a message on the SIM card
1 From standby select Menu>Messaging
and select a folder.
2 Scroll to a message and select Options
> Save message.
4 Enter the number, including the
international “+” sign and country code.
5 Select Save.
To view a message from the inbox
1 From standby select Menu>Messaging
> Inbox.
2 Scroll to the message and select View.
To write and send a text message
1 From standby select Menu>Messaging
> Write new > Text message.
2 Write the message and select Continue
> Contacts look-up.
To delete a message
1 From standby select Menu>Messaging
and select a folder.
2 Scroll to the message and press
.
3 Select a recipient and select Send.
30
Messaging
This is the Internet version of the user's guide. © Print only for private use.
Long messages
If you send a text message to a group,
you will be charged for each member.
The number of characters allowed
in a text message depends on the
language used for writing. You can
send a long message by linking two
or more messages.
To copy and paste text in a text
message
1 When you write the message, select
Options > Copy & paste.
2 Select Copy all or Mark & copy. Scroll
to and mark text in the message.
3 Select Options > Copy & paste > Paste.
To turn long messages on
1 From standby select Menu>Messaging
> Settings > Text message.
2 Select Max. msg length > Max.
available.
To add an item to a text message
1 When you write the message, select
Options > Add item.
Picture messages
Picture messages can contain text,
pictures, slides, sound recordings, video
clips, signatures and attachments. You
can send picture messages to a mobile
phone or an email address.
2 Select an option and then an item.
To save a draft of a text message
• When you write the message, select
Back > Save message.
Before you use picture messaging
You must set an Internet profile and
the address of your message server.
If no Internet profile or message server
exists, you can receive all the settings
automatically from your network
operator or at
To convert a text message to a picture
message
1 When you write the message, select
Options > To picture msg.
2 Continue creating a picture message.
To call a number in a text message
• When you view the message, scroll to
the phone number and press
.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
31
To select an MMS profile
1 From standby select Menu>Messaging
> Settings > Picture message > MMS
profile.
• Not in roaming – do not download
when not in home network.
• Always ask – ask to download.
• Off – new messages appear in the
Inbox.
2 Select a profile.
To set automatic download
1 From standby select Menu>Messaging
> Settings > Picture message > Auto
download.
To set the message server address
1 From standby select Menu>Messaging
> Settings > Picture message.
2 Scroll to MMS profile and select Edit.
3 Select Options > Edit.
2 Select an option.
4 Scroll to Message server and select
Edit.
5 Enter the address and select OK > Save.
To save an item in a picture message
• When you view a picture message
select Options > Save items and select
an item.
To create and send a picture
message
1 From standby select Menu>Messaging
> Write new > Picture msg.
Message options
You can set standard options for all
messages or choose specific settings
each time you send a message.
2 Enter text. To add items to the message,
press , scroll
and select an item.
3 Select Continue > Contacts look-up.
4 Select a recipient and select Send.
To set text message options
1 From standby select Menu>Messaging
> Settings > Text message.
Receiving picture messages
You can select how to download your
picture messages. Standard options
when you download picture messages
are:
2 Scroll to an option and select Edit.
To set picture message options
1 From standby select Menu>Messaging
> Settings > Picture message.
2 Scroll to an option and select Edit.
• Always – automatic download.
• Ask in roaming – ask to download
when not in home network.
32
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To set message options for a specific
message
1 When the message is ready and
a recipient is selected, select Options
> Advanced.
To add a picture message template
1 From standby select Menu>Messaging
> Templates > New template > Picture
msg.
2 Enter text. To add items to the message,
2 Scroll to an option and select Edit.
press , scroll
and select an item.
3 Select Save, enter a title and select OK.
Templates
If you often use the same phrases and
pictures in a message, you can save
the message as a template.
To save a message as a template
1 From standby select Menu>Messaging
> Inbox.
2 Scroll to the message and select
Options > Save as template.
To add a text message template
1 From standby select Menu>Messaging
> Templates > New template > Text.
2 Insert text or select Options to add
items. Select OK.
Voice messages
You can send and receive a sound
recording as a voice message.
3 Enter a title and select OK.
The sender and recipient must have
a subscription supporting picture
messaging.
To use a picture message template
1 From standby select Menu>Messaging
> Templates.
2 Scroll to a template and select Use.
3 When the message is ready, select
Continue > Contacts look-up.
To record and send a voice message
1 From standby select Menu>Messaging
> Write new > Voice message.
2 Record the message and select Stop
> Send > Contacts look-up.
4 Select a recipient and select Send.
3 Select a recipient and select Send.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
33
4 Scroll to Subject:. Select Edit and enter
a subject.
5 Scroll to Text:. Select Edit and enter
the text.
6 Scroll to Attachments:. Select Add and
select a file to attach.
Email
You can use standard email functions
and your computer email address in
your phone.
Before you use email
You can use the setup wizard to check
if settings are available for your email
account or you can enter them
manually. You can also receive settings
7 Select Continue > Send.
To receive and read an email
message
1 From standby select Menu>Messaging
> Email > Inbox > Options > Snd&rec.
2 Scroll to the message and select View.
To create an email account
1 From standby select Menu>Messaging
> Email > Accounts.
To save an email message
1 From standby select Menu>Messaging
> Email > Inbox.
2 Scroll to the message and select
Options > Save message.
2 Scroll to New account and select Add.
If you enter settings manually, you can
contact your email provider for more
information. An email provider could be
the company that supplied your email
address.
To reply to an email message
1 From standby select Menu>Messaging
> Email > Inbox.
2 Scroll to the message and select
Options > Reply.
3 Write the reply and select OK.
4 Select Continue > Send.
To write and send an email message
1 From standby select Menu>Messaging
> Email > Write new.
2 Select Add > Enter email addr. Enter
the email address and select OK.
3 To enter more recipients, select Edit.
Scroll to an option and select Add
> Enter email addr. Enter the email
address and select OK. When you are
ready, select Done.
To view an attachment in an email
message
• When you view the message, select
Options > Attachments > View.
34
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To save an attachment in an email
message
• When you view the message, select
To delete an email (IMAP4)
1 From standby select Menu>Messaging
> Email > Inbox.
2 Scroll to the message and select
Options > Mark for deletion.
Options > Attachments > View > Save.
Synchronizing email
3 Select Options > Clear inbox.
Email can be synchronized
with a Microsoft Exchange Server
(Microsoft® Outlook®). For more
Marked email messages will be deleted
in the phone and on the server.
Push email
You can receive notification in your
phone from your email server that you
have new email messages.
Active email account
If you have several email accounts,
you can change which one is active.
To turn on push email notification
• From standby select Menu>Messaging
> Email > Settings > Push email.
To change the active email account
1 From standby select Menu>Messaging
> Email > Accounts.
2 Select an account.
My friends
You can connect and log in to the My
friends server to communicate online
with chat messages.
To delete an email (POP3)
1 From standby select Menu>Messaging
> Email > Inbox.
2 Scroll to the message and select
Options > Mark for deletion.
Before you use My friends
If no settings exist in your phone, you
need to enter server settings. Your
service provider can provide standard
settings information such as:
Marked emails will be deleted when you
next connect to your server.
• Username
• Password
• Server address
• Internet profile
Messaging
This is the Internet version of the user's guide. © Print only for private use.
35
To enter My friends server settings
1 From standby select Menu>Messaging
> My friends > Config.
Status
You can show your status, for example,
Happy or Busy, to your contacts only.
You can also show your status to all
users on the My friends server.
2 Scroll to a setting and select Add.
To edit My friends settings
1 From standby select Menu>Messaging
> My friends.
2 Select Options > Settings.
3 Scroll to the settings you wish to change
and select Edit.
To show my status
1 From standby select Menu>Messaging
> My friends > Options > Settings
> Show my status.
2 Select an option.
To update your own status
1 From standby select Menu>Messaging
> My friends > the My Status tab.
2 Edit the information.
To log in to the My friends server
• From standby select Menu>Messaging
> My friends > Log in.
To log out of the My friends server
• Select Options > Log out.
Chat group
A chat group can be started by your
service provider, by an individual My
friends user or by yourself. You can
save chat groups by saving a chat
invitation or by searching for a specific
chat group.
To add a chat contact
1 From standby select Menu>Messaging
> My friends > the Contacts tab.
2 Select Options > Add contact.
To send a chat message
1 From standby select Menu>Messaging
> My friends > the Contacts tab.
2 Scroll to a contact and select Chat.
3 Write the message and select Send.
To create a chat group
1 From standby select Menu>Messaging
> My friends > the Chat groups tab.
2 Select Options > Add chat group
> New chat group.
3 Select who to invite from your
contacts list and select Continue.
4 Enter a short invitation text and select
Continue > Send.
36
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To add a chat group
Imaging
1 From standby select Menu>Messaging
> My friends > the Chat groups tab
> Options > Add chat group.
2 Select an option.
Camera and video recorder
You can take pictures and record video
clips to view, save or send.
Conversation history is saved between
log out and when you log in again to let
you return to chat messages from previous
conversations.
Viewfinder and camera keys
The screen is your viewfinder when you
use the camera.
To save a conversation
1
1 From standby select Menu>Messaging
> My friends > the Conversations tab.
2 Scroll to a conversation and select
Options > Advanced > Save conv.
2
To view a saved conversation
1 From standby select Menu>Messaging
> My friends > the Conversations tab.
2 Select Options > Saved conv.
Area and cell information
Area and cell information are text
messages, for example, local traffic
reports that are sent to subscribers
within a certain network area.
1
2
Zoom in or out
Take pictures/Record video
To turn area information on
1 From standby select Menu>Messaging
> Settings > Area info.
Using the camera
To activate the camera
• From standby, press and hold down
2 Scroll to Reception and select Edit>On.
.
Imaging
This is the Internet version of the user's guide. © Print only for private use.
37
To take a picture
To view pictures and video clips
1 Activate the camera and press
1 Activate the camera and press
or
to scroll to
.
or
2 To view your pictures and video clips,
press or
to select view.
2 Press
to take a picture.
.
3 The picture is automatically
saved on the memory card.
To improve a picture with Photo fix
Do not record with a strong light source
in the background. Use a support or the
self-timer to avoid a blurred picture.
1 Activate the camera and press
or
to scroll to
.
2 Select
> Settings.
3 Make sure Review is set to On.
4 Take a picture.
5 During review, select Options
> Photo fix.
To record a video clip
1 Activate the camera and press
or
to scroll to
.
2 Press
to start recording.
To stop recording
1 Press
2 The video clip is automatically saved
Camera icons and settings
Icons on the screen inform what the
current setting is. More camera settings
are available in Settings.
.
on the memory card.
To use zoom
To change settings
• Press the volume key up or down.
• Activate the camera and select
.
To adjust brightness
To view information about settings
• Press
or
.
• Scroll to a setting and select
.
To change setup
1 Activate the camera and select
2 Select Settings.
.
38
Imaging
This is the Internet version of the user's guide. © Print only for private use.
Picture blog
Camera shortcuts
A picture blog is a personal Web
page. If your subscription supports
this service, you can send pictures
to a blog.
Key
Shortcut
Camera: Shoot mode
Video: Video size
Web services may require a separate
license agreement between you and the
service provider. Additional regulations
and charges may apply. Contact your
service provider.
Night mode
Self-timer
Camera key guide
Transferring pictures
To send camera pictures to a blog
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
3 Select Options > Send > To blog.
4 Add title and text.
Transfer pictures to and from your
computer
You can use Bluetooth™ wireless
technology and the USB cable to
transfer pictures and video clips
between your computer and phone.
For more information, see Bluetooth™
5 Select OK > Publish.
To go to a blog address from
contacts
1 From standby select Menu > Contacts.
2 Scroll to a contact.
3 Scroll to a Web address and select
Go to.
You can view, enhance and organize
your pictures and video clips on your
computer by installing the Adobe™
Photoshop™ Album Starter Edition
or the Sony Ericsson Media Manager.
These are included on the CD that
comes with your phone and are
available for download at
To send a picture or video clip
1 From standby select Media.
2 Scroll to an item and select Options
> Send.
3 Select a transfer method.
Imaging
This is the Internet version of the user's guide. © Print only for private use.
39
Pictures
You can view, add, edit or delete
Make sure the receiving device supports
the transfer method you select.
pictures in Media.
To receive a picture or video clip
• Follow the instructions that appear.
Using pictures
You can add a picture to a contact, use
it during phone startup, as a wallpaper
in standby or as a screen saver.
Camera printing
You can print camera pictures using the
USB cable connected to a compatible
printer.
To use pictures
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
3 Select Options > Use as.
4 Select an option.
You can also print using a Bluetooth
compatible printer.
To print camera pictures using the
USB cable
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture.
3 Select Options > Print.
4 Select an option.
5 Connect the USB cable to the phone.
6 Connect the USB cable to the printer.
7 Wait for feedback in the phone and
select OK.
8 Enter printer settings, if required and
select Print.
To view pictures in a slide show
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
3 Select Options > Slide show.
4 Select a mood.
Photo tags
You can tag pictures to categorize
them.
You should disconnect and re-connect
the USB cable if there is a printer error.
40
Imaging
This is the Internet version of the user's guide. © Print only for private use.
To tag pictures
PhotoDJ™ and VideoDJ™
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
You can edit pictures and video clips.
To edit and save a picture
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
3 Select Options > Edit in PhotoDJ™.
4 Edit the picture.
3 Press
and scroll to a tag.
4 Press the centre navigation key option.
5 For each picture you want to tag, use
or
to scroll to the picture and
press the centre navigation key.
5 Select Options > Save.
To create a new photo tag
1 From standby select Media and scroll
to Photo > Camera album.
2 Scroll to a month and a picture. Select
View.
To edit and save a video clip
1 From standby select Menu > Organizer
> File manager > Videos.
2 Scroll to a video clip and select Options
> VideoDJ™.
3 Press
and select Options > New tag.
3 Edit the video clip.
4 Select Options > Save.
4 Enter a name and select OK.
5 Select an icon.
6 Press the centre navigation key to tag
the picture.
To trim a video clip
1 From standby select Menu > Organizer
> File manager > Videos.
2 Scroll to a video clip and select
Options > VideoDJ™ > Edit > Trim.
3 Select Set to set the starting point and
select Start.
4 Select Set to set the ending point and
select End.
5 Select Trim > Options > Save.
Imaging
This is the Internet version of the user's guide. © Print only for private use.
41
Themes
Entertainment
You can change the appearance of the
screen through items such as colours
and wallpaper. You can also create
new themes and download them. For
more information, go to
Stereo portable handsfree
To set a theme
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Themes and select Open.
3 Scroll to a theme and select Set.
To use the handsfree
• Connect the portable handsfree.
Music stops when you receive a call
and resumes when the call has ended.
Music and video players
To play music
1 From standby select Media and scroll
to Music.
2 Scroll to a title and select Play.
42
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
To play videos
To send music
1 From standby select Media and scroll
to Video.
1 From standby select Media and scroll
to Music.
2 Scroll to a title and select Play.
2 Scroll to a title and select Options
> Send.
3 Select a transfer method.
Music and video controls
To stop playing music
• Press the centre navigation key.
Make sure the receiving device supports
the transfer method you select.
To resume playing music
• Press the centre navigation key.
To receive music
• Follow the instructions that appear.
To change the volume
• When you listen to music, press the
volume keys up or down.
Transferring music from
a computer
With Sony Ericsson Media Manager,
included on the CD with your phone,
you can transfer music from CDs, your
computer or that you have purchased
to the phone memory or a memory card.
To move between tracks
• When you listen to music, press
or
.
To fast forward and rewind
• When you listen to music, press and
Sony Ericsson Media Manager software
is also available for download at
hold down
or
.
To return to the player menus
• Select Back.
Before you use Media Manager
You need one of these operating
systems to use Media Manager on
your computer:
To return to the players
• Select Options > Resume.
• Windows Vista™ (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home Premium, Home
Basic)
To exit the player menus
• Press and hold down
.
• Windows XP (Pro or Home)
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
43
To install Media Manager
For details on transferring music, refer
to Media Manager Help. Click in the
top right corner of the Media Manager
1 Turn on your computer and insert the
CD. The CD starts automatically and
the installation window opens.
window.
2 Select a language and click OK.
3 Click Install Sony Ericsson Media
Manager and follow the instructions.
Browsing files
Music and video files are saved and
categorized.
To use Media Manager
• Artists – list tracks you have transferred
using Media Manager.
• Albums – list music tracks by album
in your phone and on a memory card.
• Tracks – list all music tracks in your
phone and on a memory card.
• Audio books – list audio books you
have transferred from your computer.
• Podcasts – list all podcasts you have
transferred from your computer.
• Playlists – create own lists of tracks.
• Video – list all video clips in your
phone or on a memory card.
1 Connect the phone to a computer with
the USB cable that came with the
phone.
2 Computer: Start/Programs/
Sony Ericsson/Media Manager.
3 Phone: Select Mass storage. The phone
will shut down in this mode but will
restart again when it is disconnected
from the USB cable.
Do not remove the USB cable from your
phone or computer during transfer, as
this may corrupt the memory card or the
phone memory.
Playlists
4 For safe disconnection of the USB
cable in mass storage mode, right-click
the removable disk icon in Windows
You can create playlists to organize
files. You can sort the files by artist
or title. Files can be added to more
than one playlist.
Deleting a playlist, or a file from
a playlist, does not delete the file
from the memory, just the reference
to the file.
44
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
To create a playlist
Online music and video clips
1 From standby select Media and scroll
to Music > Playlists.
You can view video clips and listen
to music by streaming them to your
phone from the Internet. If settings are
contact your network operator or go to
2 Scroll to New playlist and select Add.
3 Enter a name and select OK.
4 Scroll to a track and select Mark.
5 Select Add to add the track to the
playlist.
To select a data account for streaming
1 From standby select Menu > Settings
> the Connectivity tab > Streaming
settings.
To add files to a playlist
1 From standby select Media and scroll
to Music > Playlists.
2 Select a playlist.
2 Select the data account to use.
3 Scroll to Add music > Add.
4 Scroll to a track and select Mark.
5 Select Add to add the track to the
playlist.
To stream music and video clips
1 From standby select Menu > Internet.
2 Select > Options > Go to > Bookmarks.
3 Select a link to stream from.
To remove tracks from a playlist
1 From standby select Media and scroll
to Music > Playlists.
TrackID™
TrackID™ is a free music recognition
service. Search for song titles, artists
and album names.
2 Select a playlist.
3 Scroll to the track and press
.
To delete a playlist
1 From standby select Media and scroll
to Music > Playlists.
2 Scroll to a playlist and press
To search for song information
• When you hear a song through
a loudspeaker, from standby select
Menu > Entertainment > TrackID™.
• When the radio is playing select Options
> TrackID™.
.
To view information about a track
• Scroll to a track and select Options
> Information.
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
45
To select saved channels
1 From standby select Menu > Radio
> Options > Channels.
Radio
Do not use your phone as a radio in
places where this is prohibited.
2 Select a radio channel.
To listen to the radio
1 Connect the handsfree to the phone.
2 From standby select Menu > Radio.
To save channels in positions 1 to 10
• When you have found a radio channel,
press and hold down
–
.
To change the volume
• When the radio is playing, press the
volume keys up or down.
To select channels saved in positions
1 to 10
• When the radio is playing, press
–
.
To automatically search for channels
• When the radio is playing, select
Search.
PlayNow™
You can listen to music before you
purchase and download it to your
phone.
To manually search for channels
• When the radio is playing, press
or
.
This service is not available in all
countries. In some countries you
can purchase music from some of
the world’s top musical artists.
To switch between preset channels
• When the radio is playing, press
or
.
Before you use PlayNow™
Saving channels
You must have the required settings in
You can save up to 20 preset channels.
To save channels
To listen to PlayNow™ music
1 From standby select Menu
> PlayNow™.
• When you have found a radio channel
select Options > Save.
2 Select music from a list.
46
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
Downloading from PlayNow™
To turn the ringtone off
The price appears when you select to
download and save a music file. Your
phone bill or prepay card is debited
when a purchase is accepted.
• From standby press and hold down
.
All signals except the alarm signal are
affected.
To download a music file
When you have listened to a music file
preview, you can agree to accept the
conditions.
To set the vibrating alert
1 From standby select Menu > Settings
> the Sounds & alerts tab > Vibrating
alert.
1 Select Yes to download.
2 A text message is sent to confirm
payment and the file is made available
to download.
2 Select an option.
To send a ringtone
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Music and select Open.
3 Scroll to a ringtone and select Options
> Send.
Ringtones and melodies
To set a ringtone
1 From standby select Menu > Settings
> the Sounds & alerts tab > Ringtone.
2 Find and select a ringtone.
4 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
To set the ringtone volume
1 From standby select Menu > Settings
>the Sounds & alerts tab >Ring volume.
To receive a ringtone
• Follow the instructions that appear.
2 To change the volume, press
3 Select Save.
or
.
You are not allowed to exchange some
copyright-protected material. A protected
file has a
icon.
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
47
3 Find a melody and select Options
> Send.
4 Select a transfer method.
MusicDJ™
You can compose and edit your own
melodies to use as ringtones. A melody
consists of four types of tracks–Drums,
Basses, Chords, and Accents. A track
contains a number of music blocks.
The blocks consist of pre-arranged
sounds with different characteristics.
The blocks are grouped into Intro,
Verse, Chorus, and Break.
Make sure the receiving device supports
the transfer method you select.
To receive a melody
• Follow the instructions that appear.
You cannot send a polyphonic melody
or MP3 file in a text message.
You compose a melody by adding
music blocks to the tracks.
Sound recorder
You can record a voice memo or a call.
Recorded sounds can also be set as
ringtones.
To compose a melody
1 From standby select Menu
> Entertainment > MusicDJ™.
2 Select to Insert, Copy or Paste blocks.
In some countries or states it is required
by law that you inform the other person
before recording the call.
3 Use
,
,
or
to scroll between
the blocks.
4 Select Options > Save melody.
To record a sound
• From standby select Menu
> Entertainment > Record sound.
To edit a melody
1 From standby select Menu > Organizer
> File manager > Music.
2 Scroll to a melody and select Options
> Edit.
3 Edit the melody and select Options
> Save melody.
To listen to a recording
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Music and select Open.
3 Scroll to a recording and select Play.
To send a melody
1 From standby select Menu > Organizer
> File manager.
2 Scroll to Music and select Open.
48
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
To view information about a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Information.
Games
Your phone contains several games.
You can also download games. Help
texts are available for most games.
To start a game
1 From standby select Menu
> Entertainment > Games.
2 Select a game.
To set permissions for a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Permissions.
To end a game
• Press
.
Gaming control
3 Set permissions.
The keys on your phone can be used
for different gaming control functions.
Java application screen size
Some Java applications are designed
for a specific screen size. For more
information, contact the application
vendor.
Applications
You can download and run Java
applications. You can also view
information or set different
permissions.
To set the screen size for a Java
application
1 From standby select Menu > Organizer
> Applications.
2 Scroll to an application and select
Options > Screen size.
3 Select an option.
Before you use Java™ applications
If settings are not already entered in
To select a Java application
1 From standby select Menu > Organizer
> Applications.
Internet profiles for Java applications
Some Java applications need to connect
to the Internet to receive information.
Most Java applications use the same
Internet settings as your Web browser.
2 Select an application.
Entertainment
This is the Internet version of the user's guide. © Print only for private use.
49
Phone name
You can enter a name for your phone
to be shown to other devices.
Connectivity
Settings
Before you synchronize with an Internet
service, use the Internet, PlayNow™,
My friends, Java, picture messaging,
email and picture blog you need to have
settings in your phone.
To enter a phone name
1 From standby select Menu > Settings
> the Connectivity tab > Phone name.
2 Enter the phone name and select OK.
If settings are not already entered, you
can download settings using the setup
wizard or by going to
Using the Internet
You can use the Internet to access
online services.
To start browsing
To download settings using the setup
wizard
1 From standby select Menu > Settings
> the General tab > Setup wizard
> Settings download.
1 From standby select Menu > Internet.
2 Select Options > Go to.
3 Select an option.
To exit the browser
• When you browse the Internet, select
Options > Exit browser.
2 Follow the instructions that appear.
Contact your network operator or
service provider for more information.
To make a call while browsing
• When you browse the Internet press
.
To download settings using
a computer
To save an item from a Web page
1 When you browse the Internet, select
an item.
2 Follow the instructions on the screen.
2 Select Options > Tools and save the
item.
50
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
To find text on a Web page
1 When you browse the Internet, select
Options > Tools > Find on page.
2 Enter text and press Find.
Internet keypad shortcuts
You can use the keypad to go directly
to an Internet browser function.
To select Internet keypad shortcuts
1 From standby select Menu > Internet.
2 Select Options > Advanced > Keypad
mode > Shortcuts.
To send a link
1 When you browse the Internet, select
Options > Tools > Send link.
2 Select an option.
Key
Shortcut
Using bookmarks
Bookmarks
You can create and edit bookmarks
as quick links to your favourite Web
pages.
-
Enter text to Enter address,
Search Internet or search
in Bookmarks.
To create a bookmark
Fullscreen or Landscape
or Normal screen.
1 When you browse the Internet, select
Options > Tools > Add bookmark.
2 Enter a title and an address. Select
Save.
Zoom
Pan & zoom
(when Smart-Fit is off).
To edit a bookmark
Internet security and certificates
Your phone supports secure browsing.
Certain Internet services, such as
banking, require certificates in your
phone. Your phone may already contain
certificates when you buy it or you can
download new certificates.
1 From standby select Menu > Internet
> Options > Go to > Bookmarks.
2 Scroll to a bookmark and select
Options > Edit.
3 Edit the bookmark and select Save.
To select a bookmark
1 From standby select Menu > Internet.
2 Select Options > Go to > Bookmarks.
3 Scroll to a bookmark and select Go to.
To view certificates in the phone
• From standby select Menu > Settings
> the General tab > Security
> Certificates.
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
51
• Connect to computers and access
the Internet.
• Exchange items and play multiplayer
games.
Web feeds
You can receive frequently updated
content, such as podcasts or news
headlines, as Web feeds. You can add
feeds for a page, if it has the
icon.
We recommend a range within 10 metres
(33 feet), with no solid objects in between,
for Bluetooth communication.
To add new feeds for a Web page
• When you browse a page on the
Internet that has Web feeds, select
Options > Web feeds.
Before you use Bluetooth wireless
technology
You must turn on the Bluetooth function
to communicate with other devices.
You must also pair your phone with
other Bluetooth devices.
To create a new Web feed
1 From standby select Menu>Messaging
> Web feeds > Options > New feed.
2 Enter the address and select Go to.
To turn the Bluetooth function on
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Turn on.
To set options for Web feeds
1 From standby select Menu>Messaging
> Web feeds.
2 Scroll to a Web feed and select Options.
3 Select an option.
Make sure that the device you want to
pair your phone with has the Bluetooth
function activated and is made visible.
Bluetooth™ wireless
technology
The Bluetooth function makes wireless
connection to other Bluetooth devices
possible. You can, for example:
To pair the phone with a device
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> My devices.
2 Scroll to New device and select Add
to search for available devices.
3 Select a device.
• Connect to handsfree devices.
• Connect to several devices at the
same time.
4 Enter a passcode, if required.
52
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
To allow connection to the phone
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> My devices.
2 Select a device from the list.
3 Select Options > Allow connection.
Power saving
You can save battery power with the
Power save function. You can only
connect with a single Bluetooth device.
You must turn this function off if you
want to connect with more than one
Bluetooth device at the same time.
To edit the device list
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> My devices.
2 Select a device from the list.
3 Select Options.
To turn powersave on
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Powersave > On.
Visibility
4 Select an option.
If you want other Bluetooth devices
to be able to discover your phone, you
can choose to make your phone visible.
To pair the phone with a Bluetooth
handsfree for the first time
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Handsfree.
2 Select Yes.
3 Enter a passcode, if required.
To show your phone
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Visibility > Show phone.
To receive an item
To pair the phone with more than one
Bluetooth handsfree
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Handsfree > My handsfree > New
handsfree.
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Visibility > Show phone.
2 When you receive an item, follow the
instructions that appear.
2 Scroll to a device and select Add.
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
53
Transferring sound to and from
a Bluetooth handsfree
You can transfer the sound to and from
a Bluetooth handsfree using a phone
key or the handsfree key.
File transfer
You can synchronize and transfer files
using Bluetooth wireless technology.
on page 56.
To transfer sound
Using the USB cable
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Handsfree > Incoming call.
2 Select an option. In phone transfers
sound to the phone. In handsfree
transfers sound to the handsfree.
You can connect your phone to
a computer with the USB cable
to transfer files using Mass storage
or Media transfer. You can also
synchronize, transfer files and
use your phone as a modem using
Phone mode. For more information
go to the Getting started section at
To transfer sound during a call
1 During a call, select Sound > Transfer
sound.
Before you use the USB cable
You need one of these operating
systems to transfer files using a USB
cable:
2 Select from the list.
Remote control
You can use your phone as a remote
control device. You can control
computer applications such as
a media player or Microsoft®
PowerPoint® presentations or
devices with Bluetooth support.
• Windows® 2000
• Windows XP (Pro and Home)
• Windows Vista (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home Premium, Home
Basic)
To select remote control
1 From standby select Menu
> Entertainment > Remote control.
2 Select an application to use and the
device to connect to.
Media transfer and Mass storage
You can drag and drop files between
your phone or memory card and
a computer in Microsoft Windows
Explorer.
54
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
3 Phone: Select Media transfer and the
phone will remain activated during file
transfer.
4 Computer: Wait until the phone
memory and memory card appear
as external disks in Windows Explorer.
5 Drag and drop selected files between
the phone and the computer.
Only use a USB cable supported by your
phone. Do not remove the USB cable
from your phone or computer during file
transfer as this may corrupt the phone
memory or the memory card.
To use media transfer and mass
storage mode
To disconnect the USB cable safely
1 Right-click the removable disk icon
in Windows Explorer.
2 Select Eject.
3 Disconnect the USB cable when the
following message is shown in the
phone: Mass storage session ended. It
is now safe to remove the USB cable.
Phone mode
Before synchronizing or using your
phone as a modem you must install
the Sony Ericsson PC Suite software
on your computer. See To install the
Before transferring files you must install
the Sony Ericsson PC Suite software
To use phone mode
1 Connect the USB cable to the phone
and the computer.
2 Phone: Select Mass storage. The phone
will shut down in this mode and restart
when disconnected from the USB
cable.
1 Computer: Start PC Suite from Start/
Programs/Sony Ericsson/PC Suite.
2 Connect the USB cable to the phone
and the computer.
3 Phone: Select Phone mode.
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
55
4 Computer: When you are notified that
the Sony Ericsson PC Suite has found
your phone, you can start using the
phone mode applications.
You need one of these operating
systems to use the PC Suite on your
computer:
• Windows XP (Pro and Home)
• Windows Vista (32 bit and 64 bit
versions of: Ultimate, Enterprise,
Business, Home, Premium, Home
Basic)
For usage details, see the Sony Ericsson
PC Suite Help section once the software
has been installed on your computer.
Synchronizing
To install the Sony Ericsson PC Suite
1 Turn on your computer and insert the
CD. The CD starts automatically and
the installation window opens.
2 Select a language and click OK.
3 Click Install Sony Ericsson PC suite and
follow the instructions on the screen.
You can use the USB cable or Bluetooth
wireless technology to synchronize
phone contacts, appointments,
bookmarks, tasks and notes with
a computer program such as Microsoft
Outlook. You can also synchronize with
an Internet service using SyncML or
a Microsoft® Exchange Server using
Exchange ActiveSync. For more
information go to the Getting started
section at
Synchronization using an Internet
service
You can synchronize online using
an Internet service with your phone.
If Internet settings are not in your phone,
Use only one of the synchronization
methods at a time with your phone.
Before you start to synchronize
You must enter settings for SyncML
synchronization and register
a synchronization account online
with a service provider. Settings
that are required are:
Synchronization using a computer
Before synchronizing you need to install
the Sony Ericsson PC Suite from the CD
included with your phone. The software
includes help information. You can also
to download the software.
• Server address – server URL
• Database name – database to
synchronize with
56
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
To enter settings for SyncML
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to New account and select Add
> SyncML.
Synchronization using a Microsoft®
Exchange Server
You can access and synchronize
corporate exchange information such
as email, contacts and calendar entries
with a Microsoft® Exchange Server
using your phone.
3 Enter a name for the new account and
select Continue.
4 Scroll to Server address. Enter the
required information and select OK.
5 Enter Username and Password,
if required.
6 Scroll to the Applications tab to mark
which applications you would like to
synchronize.
7 Scroll to the App settings tab and select
an application.
8 Select Database name and enter the
required information.
For more information on synchronization
settings, contact your IT administrator.
Before you start to synchronize
You must enter settings for Exchange
ActiveSync to access a Microsoft
Exchange Server. Settings that are
required are:
• Server address – server URL
• Domain – server domain
• Username – account username
• Password – account password
9 Scroll to the Advanced tab to enter
additional settings for synchronizing.
10 Select Save.
To enter settings for Exchange
ActiveSync
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to New account > Add
> Exchange ActiveSync.
3 Enter a name for the new account and
select Continue.
4 Enter the required settings.
5 Scroll between the tabs to enter
additional settings.
To delete an account
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to an account and select Options
> Delete.
To start synchronization
1 From standby select Menu > Organizer
> Synchronization.
2 Scroll to an account and select Start.
6 Select Save.
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
57
To start synchronization
1 From standby select Menu > Organizer
> Synchronization.
To use Update service using the
phone
1 From standby select Menu > Settings
> the General tab > Update service.
2 Select Search for update and follow
the instructions that appear.
2 Scroll to an account and select Start.
Update service
You can update your phone with the
latest software. You do not lose
personal or phone information.
To use Update service using a USB
cable
or click the Sony Ericsson Update
service in the PC Suite software
if installed on your computer. See
on page 56.
There are two ways to update your
phone:
• Over the air using your phone.
• Using the provided USB cable and
an Internet-connected computer.
2 Select a region and country.
3 Follow the instructions on the screen.
Update service requires data access
such as GPRS, 3G or HSDPA.
To set a reminder to use Update
service
1 From standby select Menu > Settings
> the General tab > Update service
> Settings > Reminder.
Before you use the Update service
If settings are not in your phone see
To view the current software in the
phone
2 Select an option.
1 From standby select Menu > Settings
> the General tab > Update service.
2 Select Software version.
58
Connectivity
This is the Internet version of the user's guide. © Print only for private use.
To silence the alarm
• When the alarm sounds, press any key.
• To repeat the alarm, select Snooze.
More features
Alarms
You can set a sound or the radio as an
alarm signal. The alarm sounds even if
the phone is turned off. When the alarm
sounds you can silence it for 9 minutes
or turn it off.
To turn off an alarm
• When the alarm sounds, select TurnOff.
To cancel the alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select TurnOff.
To set the alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Time: and select Edit.
4 Enter a time and select OK > Save.
The alarm in silent mode
You can set the alarm not to sound
when the phone is in silent mode.
To set an alarm to sound or not
in silent mode
1 From standby select Menu > Alarms.
To set the recurrent alarm
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Recurrent: and select Edit.
4 Scroll to a day and select Mark.
5 To select another day, scroll to the day
and select Mark.
2 Scroll to an alarm and select Edit.
3 Scroll to the
tab.
4 Scroll to Silent mode and select Edit.
5 Select an option.
Calendar
6 Select Done > Save.
The calendar can be synchronized with
a computer calendar, with a calendar on
the Web or with a Microsoft® Exchange
Server (Microsoft® Outlook®). For
To set the alarm signal
1 From standby select Menu > Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Alarm signal: and select Edit.
4 Find and select an alarm signal. Select
Save.
More features
This is the Internet version of the user's guide. © Print only for private use.
59
Default view
To edit an appointment
1 From standby select Menu > Organizer
> Calendar.
You can choose whether month, week
or day view will appear first when you
open the calendar.
2 Select a date.
3 Scroll to an appointment and select
View.
4 Select Options > Edit.
5 Edit the appointment and confirm
each entry.
To set default view
1 From standby select Menu > Organizer
> Calendar.
2 Select Options > Advanced > Default
view.
6 Select Save.
3 Select an option.
To send an appointment
1 From standby select Menu > Organizer
> Calendar.
Appointments
You can add new appointments
or reuse existing appointments.
2 Select a date.
To add an appointment
1 From standby select Menu > Organizer
> Calendar.
3 Scroll to an appointment and select
Options > Send.
4 Select a transfer method.
2 Select a date.
Make sure the receiving device supports
the transfer method you select.
3 Scroll to New appointm. and select Add.
4 Enter the information and confirm
each entry.
To view a calendar week
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Select Options > View week.
5 Select Save.
To view an appointment
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Scroll to an appointment and select
View.
60
More features
This is the Internet version of the user's guide. © Print only for private use.
To set when reminders should sound
1 From standby select Menu > Organizer
> Calendar.
2 Select a date.
3 Select Options>Advanced>Reminders.
4 Select an option.
Tasks
You can add new tasks or reuse existing
tasks.
To add a task
1 From standby select Menu > Organizer
> Tasks.
2 Scroll to New task and select Add.
3 Select an option.
A reminders option set in calendar
affects a reminders option set in tasks.
4 Enter details and confirm each entry.
Calendar shortcuts
In the calendar, there are shortcuts
to different views.
To view a task
1 From standby select Menu > Organizer
> Tasks.
Key Shortcut
Back a week
Back a month
Back a year
Next year
2 Scroll to a task and select View.
To reuse an existing task
1 From standby select Menu > Organizer
> Tasks.
2 Scroll to a task and select View.
3 Select Options > Edit.
4 Edit the task and select Continue.
5 Choose to set a reminder.
Today’s date
Next week
Next month
View month
View week
To send a task
1 From standby select Menu > Organizer
> Tasks.
View day
2 Scroll to a task and select Options
> Send.
3 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
More features
This is the Internet version of the user's guide. © Print only for private use.
61
To set when reminders should sound
1 From standby select Menu > Organizer
> Tasks.
2 Scroll to a task and select Options
> Reminders.
Make sure the receiving device supports
the transfer method you select.
To use an item in a note
1 When you view the note, select a phone
number, email or Web address.
2 Select Options > Use.
3 Select an option.
A reminders option set in tasks affects
a reminders option set in calendar.
3 Select an option.
Timer, stopwatch and
calculator
Notes
You can make notes and save them.
You can also show a note in standby.
To use the timer
1 From standby select Menu > Organizer
> Timer.
2 Enter the hours, minutes and seconds.
3 Select Start.
To add a note
1 From standby select Menu > Organizer
> Notes.
2 Scroll to New note and select Add.
3 Write a note and select Save.
To use the stopwatch
1 From standby select Menu > Organizer
> Stopwatch > Start.
2 To view a new lap time, select Lap.
To show a note in standby
1 From standby select Menu > Organizer
> Notes.
To use the calculator
1 From standby select Menu > Organizer
> Calculator.
2 Scroll to a note and select Options
> Show in standby.
To send a note
1 From standby select Menu > Organizer
> Notes.
2 Press
or
to select ÷ x - + . % =.
2 Scroll to a note and select Options
> Send.
3 Select a transfer method.
62
More features
This is the Internet version of the user's guide. © Print only for private use.
To change a passcode
1 From standby select Menu > Organizer
> Code memo.
2 Enter your passcode and select Options
> Change passcode.
3 Enter your new passcode and select
Continue.
4 Re-enter the new passcode and select
Continue.
Code memo
You can save security codes, for
example, for credit cards. You must set
a passcode to open the code memo.
Checkword
The checkword confirms that you have
entered the correct passcode. If the
passcode is correct, the correct codes
are shown. If the passcode is incorrect,
the checkword and the codes shown
are also incorrect.
5 Enter a checkword and select Done.
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are deleted.
The next time you enter the code memo,
you must proceed as if you are opening
it for the first time. See To open code
To open code memo for the first time
1 From standby select Menu > Organizer
> Code memo.
2 Follow the instructions that appear and
select Continue.
3 Enter a passcode and select Continue.
4 Confirm the passcode and select
Continue.
To reset code memo
1 From standby select Menu > Organizer
> Code memo.
2 Enter any passcode to access the code
memo. The checkword and codes that
are then shown are incorrect.
3 Select Options > Reset.
4 Reset code memo? appears.
5 Select Yes.
5 Enter a checkword and select Done.
To add a code
1 From standby select Menu > Organizer
> Code memo.
2 Enter a passcode and select Continue.
3 Scroll to New code and select Add.
4 Enter a name associated with the code
and select Continue.
5 Enter the code and select Done.
More features
This is the Internet version of the user's guide. © Print only for private use.
63
To set the date
Profiles
1 From standby select Menu > Settings
> the General tab > Time & date > Date.
2 Enter the date and select Save.
Profiles automatically adapt some
phone settings to different situations,
for example, the ring volume may
be adapted to suit a meeting or an
accessory. You can reset all profiles
to how they were set when you
purchased your phone.
To set the time zone
1 From standby select Menu > Settings
> the General tab > Time & date
> My time zone.
To select a profile
2 Select the time zone you are in by city.
1 From standby select Menu > Settings
> the General tab > Profiles.
2 Select a profile.
If you select a city, My time zone also
updates the time when daylight saving
time changes.
To view and edit a profile
1 From standby select Menu > Settings
> the General tab > Profiles.
2 Scroll to a profile and select Options
> View and edit.
Locks
SIM card lock
This lock only protects your
subscription. Your phone will work
with a new SIM card. If the lock is
on, you have to enter a PIN (Personal
Identity Number).
You cannot rename the Normal profile.
To reset all profiles
If you enter your PIN incorrectly three
times in a row, the SIM card is blocked
and you need to enter your PUK
(Personal Unblocking Key). Your PIN
and PUK are supplied by your network
operator.
1 From standby select Menu > Settings
> the General tab > Profiles.
2 Select Options > Reset profiles.
Time and date
To set the time
1 From standby select Menu > Settings
> the General tab > Time & date > Time.
2 Enter the time and select Save.
64
More features
This is the Internet version of the user's guide. © Print only for private use.
To unblock the SIM card
1 When PIN blocked appears, enter your
PUK and select OK.
2 Enter a new four-to-eight-digit PIN and
select OK.
Phone lock
You can stop unauthorized use of your
phone. Change the phone lock code
(0000) to any four-to-eight-digit personal
code.
3 Re-enter the new PIN and select OK.
It is important that you remember
your new code. If you forget it, you
have to take your phone to your local
Sony Ericsson retailer.
To edit the PIN
1 From standby select Menu > Settings
> the General tab > Security > Locks
> SIM protection > Change PIN.
2 Enter your PIN and select OK.
3 Enter a new four-to-eight-digit PIN and
select OK.
To use the phone lock
1 From standby select Menu > Settings
> the General tab > Security > Locks
> Phone protection > Protection.
2 Select an option.
4 Re-enter the new PIN and select OK.
3 Enter the phone lock code and select
OK.
If Codes do not match appears, you
entered the new PIN incorrectly.
If Wrong PIN appears, followed by
Old PIN:, you entered your old PIN
incorrectly.
To unlock the phone
• Enter your code and select OK.
To change the phone lock code
1 From standby select Menu > Settings
> the General tab > Security > Locks
> Phone protection > Change code.
2 Enter the old code and select OK.
3 Enter the new code and select OK.
4 Repeat the code and select OK.
To use the SIM card lock
1 From standby select Menu > Settings
> the General tab > Security > Locks
> SIM protection > Protection.
2 Select an option.
3 Enter your PIN and select OK.
More features
This is the Internet version of the user's guide. © Print only for private use.
65
Keypad lock
Troubleshooting
Some problems will require you to call
your network operator.
You can set this lock to avoid accidental
dialling. Incoming calls can be answered
without unlocking the keypad.
For more support go to
Calls to the international emergency
number 112 can still be made.
Common questions
To use the automatic keylock
1 From standby select Menu > Settings
>the General tab>Security>Automatic
keylock.
I have problems with memory capacity
or the phone is working slowly
Restart your phone every day to free
2 Select an option.
memory or do a Master reset.
To lock the keypad manually
Master reset
• From standby press
and select
If you select Reset settings, the changes
that you have made to settings will be
deleted.
Lock.
To unlock the keypad manually
• From standby press
Unlock.
and select
If you select Reset all, in addition to
your changes to settings, all contacts,
messages, personal data, and content
that you have downloaded, received
or edited will also be deleted.
IMEI number
Keep a copy of your IMEI (International
Mobile Equipment Identity) number in
case your phone is stolen.
To reset the phone
1 From standby select Menu > Settings
> the General tab > Master reset.
2 Select an option.
To view your IMEI number
• From standby press
,
,
,
,
.
3 Follow the instructions that appear.
66
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
I cannot charge the phone or battery
capacity is low
I cannot use picture messages
on my phone
The charger is not properly connected
or the battery connection is poor.
Remove the battery and clean the
connectors.
Your subscription does not include
data capability. Settings are missing or
incorrect. Please contact your network
operator.
The battery is worn out and needs to
be replaced. See Charging the battery
on page 7.
order settings and follow the instructions
No battery icon appears when I start
charging the phone
It may take a few minutes before the
battery icon appears on the screen.
How do I turn on and off T9 Text Input
when writing?
When you enter text, press and hold
down
. You will see
at the top
Some menu options appear in grey
A service is not activated. Contact
your network operator.
of the screen when T9 Text Input is
activated.
How do I change phone language?
1 From standby select Menu > Settings
> the General tab > Language > Phone
language.
I cannot use SMS/text messages
on my phone
Settings are missing or incorrect.
Contact your network operator to
find out the correct SMS service
centre setting. See Text messages
on page 30.
2 Select an option.
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
67
I cannot use the Internet
Error messages
Your subscription does not include
data capability. Internet settings are
missing or incorrect. Please contact
your network operator.
Insert SIM
There is no SIM card in your phone or
you may have inserted it incorrectly.
to order Internet settings, and follow
the instructions on the screen. See
The SIM card connectors need cleaning.
If the card is damaged, contact your
network operator.
Insert correct SIM card
The phone cannot be detected by
other devices using Bluetooth
wireless technology
You have not turned the Bluetooth
function on.
Your phone is set to work only with
certain SIM cards. Check if you are
using the correct operator SIM card.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2
incorrectly.
Make sure that the visibility is set to
on page 53.
Enter the correct PIN or PIN2 and
I cannot synchronize or transfer data
between my phone and my computer,
when using the USB cable.
The cable or software that came
with your phone has not been properly
installed. Go to
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2
code incorrectly three times in a row.
www.sonyericsson.com/support to read
Getting started guides which contain
detailed installation instructions and
troubleshooting guides.
68
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
Codes do not match
PUK blocked. Contact operator.
You entered your personal unblocking
key code (PUK) incorrectly 10 times in
a row.
Codes that you have entered do not
match. When you want to change
a security code, for example your PIN,
you have to confirm the new code.
Charging, alien battery
The battery that you are using is not
a Sony Ericsson-approved battery.
No netw. coverage
Your phone is in flight mode. See
Your phone is not receiving any network
signal, or the received signal is too
weak. Contact your network operator
and make sure that the network has
coverage where you are.
The SIM card is not working properly.
Insert your SIM card in another phone.
If this works, it is probably your phone
that is causing the problem. Please
contact the nearest Sony Ericsson
service location.
Emerg. calls only
You are within range of a network,
but you are not allowed to use it.
However, in an emergency, some
network operators allow you to call the
international emergency number 112.
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
69
section in the language of your choice, you will find
the latest support tools and information, such as
software updates, Knowledge base, phone setup
and additional help when you require it.
For operator-specific services and features, please
contact your network operator for more information.
You can also contact our Call Centers. See the
phone number for the nearest Call Center in the list
below. If your country/region is not represented in
the list, please contact your local dealer. The phone
numbers below were correct at the time of going to
find the latest updates.
In the unlikely event that your product needs
service please contact the dealer from whom it was
purchased or one of our service partners. Save your
original proof of purchase, you will need it if you
need to claim warranty.
Important information
Sony Ericsson Consumer Web site
section where help and tips are only a few clicks
away. Here you will find the latest computer software
updates and tips on how to use your product more
efficiently.
Service and support
From now on you will have access to a portfolio
of exclusive service advantages such as:
Global and local Web sites providing support.
A global network of Call Centers.
An extensive network of Sony Ericsson service
partners.
A warranty period. Learn more about the warranty
conditions in this User guide.
•
•
•
•
Country
Argentina
Australia
Austria
Belgium
Brazil
Canada
Central Africa
Chile
China
Colombia
Croatia
Czech Republic
Denmark
Finland
Phone number
800-333-7427
1-300 650 050
0810 200245
02-7451611
Email address
4001-0444
1-866-766-9374
+27 112589023
123-0020-0656
4008100000
18009122135
062 000 000
844 550 055
33 31 28 28
09-299 2000
0 825 383 383
0180 534 2020
France
Germany
70
Important information
This is the Internet version of the user's guide. © Print only for private use.
Greece
801-11-810-810
210-89 91 919 (from mobile)
Hong Kong
Hungary
India
8203 8863
+36 1 880 4747
39011111
(Add STD code when dialling from a GSM connection)
Indonesia
Ireland
Italy
Lithuania
Malaysia
Mexico
Netherlands
New Zealand
Norway
021-2701388
1850 545 888
06 48895206
8 700 55030
1-800-889900
01 800 000 4722
0900 899 8318
0800-100150
815 00 840
Pakistan
111 22 55 73
Outside Karachi: (92-21) 111 22 55 73
Philippines
Poland
Portugal
Romania
Russia
Singapore
Slovakia
South Africa
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
Ukraine
United Arab Emirates
United Kingdom
United States
Venezuela
02-6351860
0 (prefix) 22 6916200
808 204 466
(+4021) 401 0401
8(495) 787 0986
67440733
02-5443 6443
0861 632222
902 180 576
013-24 45 00
0848 824 040
02-25625511
02-2483030
0212 47 37 777
(+380) 44 590 1515
43 919880
08705 23 7237
1-866-766-9374
0-800-100-2250
Important information
71
This is the Internet version of the user's guide. © Print only for private use.
•
•
Do not use your product when in, or around aircraft,
or areas showing the sign “turn off two-way radio”.
Do not use your product in an area
where a potentially explosive
Guidelines for Safe and
Efficient Use
Please read this information before
using your mobile phone.
atmosphere exists.
•
•
Do not place your product or install
wireless equipment in the area above
an air bag in your car.
Caution: Cracked or broken displays may create
sharp edges or splinters that could be harmful upon
contact.
These instructions are intended for
your safety. Please follow these
guidelines. If the product has been
subject to any of the conditions listed below or you
have any doubt as to its proper function make sure
you have the product checked by a certified service
partner before charging or using it. Failure to do so
might entail a risk of product malfunction or even
a potential hazard to your health.
CHILDREN
KEEP OUT OF CHILDRENS REACH.
DO NOT ALLOW CHILDREN TO PLAY
WITH YOUR MOBILE PHONE OR ITS
ACCESSORIES. THEY COULD HURT
THEMSELVES OR OTHERS, OR COULD
ACCIDENTALLY DAMAGE THE MOBILE PHONE
OR ACCESSORY. YOUR MOBILE PHONE OR ITS
ACCESSORY MAY CONTAIN SMALL PARTS THAT
COULD BECOME DETACHED AND CREATE A
CHOKING HAZARD.
Recommendations for safe use
of product (mobile phone, battery,
charger and other accessories)
•
Always treat your product with care and keep it in
a clean and dust-free place.
•
•
Warning! May explode if disposed of in fire.
Do not expose your product to liquid or moisture
or humidity.
•
Do not expose your product to
extreme high or low temperatures.
Do not expose the battery to
temperatures above +60°C (+140°F).
Do not expose your product to open
flames or lit tobacco products.
Do not drop, throw or try to bend your product.
Do not paint your product.
Do not attempt to disassemble or modify
your product. Only Sony Ericsson
authorised personnel should perform
service.
Power supply (Charger)
Connect the AC power adapter only to designated
power sources as marked on the product. Make
sure the cord is positioned so that it will not be
subjected to damage or stress. To reduce risk
of electric shock, unplug the unit from any power
source before attempting to clean it. The AC power
adapter must not be used outdoors or in damp
areas. Never alter the cord or plug. If the plug does
not fit into the outlet, have a proper outlet installed
by a qualified electrician.
•
•
•
•
Use only Sony Ericsson branded original chargers
intended for use with your mobile phone. Other
chargers may not be designed to the same safety
and performance standards.
•
Do not use your product near medical
equipment without requesting permission from
your treating physician or authorized medical staff.
72
Important information
This is the Internet version of the user's guide. © Print only for private use.
Battery
Driving
We recommend that you fully charge the battery
before you use your mobile phone for the first time.
A new battery or one that has not been used for
a long time could have reduced capacity the first few
times it is used. The battery should only be charged
in temperatures between +5°C (+41°F) and +45°C
(+113°F).
Please check if local laws and regulations restrict
the use of mobile phones while driving or require
drivers to use handsfree solutions. We recommend
that you use only Sony Ericsson handsfree solutions
intended for use with your product.
Please note that because of possible interference to
electronic equipment, some vehicle manufacturers
forbid the use of mobile phones in their vehicles
unless a handsfree kit with an external antenna has
been installed.
Use only Sony Ericsson branded original batteries
intended for use with your mobile phone. Using other
batteries and chargers could be dangerous.
Talk and standby times depend on several different
conditions such as signal strength, operating
temperature, application usage patterns, features
selected and voice or data transmissions when the
mobile phone is being used.
Always pay full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
Emergency calls
Turn off your mobile phone before removing the
battery. Do not put the battery into your mouth.
Battery electrolytes may be toxic if swallowed.
Do not let the metal contacts on the battery touch
another metal object. Doing this could short-circuit
and damage the battery. Use the battery for the
intended purpose only.
Mobile phones operate using radio signals, which
cannot guarantee connection in all conditions. You
should therefore never rely solely upon any mobile
phone for essential communications (e.g. medical
emergencies).
Emergency calls may not be possible in all areas,
on all cellular networks, or when certain network
services and/or mobile phone features are in use.
Check with your local service provider.
Personal medical devices
Mobile phones may affect the operation of
pacemakers and other implanted equipment. Please
avoid placing the mobile phone over the pacemaker,
e.g. in your breast pocket. When using the mobile
phone, use it at the ear on the opposite side of the
body to the pacemaker. If a minimum distance of
15 cm (6 inches) is kept between the mobile phone
and the pacemaker, the risk of interference is limited.
If you have any reason to suspect that interference
is taking place, immediately turn off your mobile
phone. Contact your cardiologist for more
information.
Antenna
This phone contains a built-in antenna. Use of
antenna devices not marketed by Sony Ericsson
specifically for this model could damage your mobile
phone, reduce performance, and produce SAR
levels above the established limits (see below).
Efficient use
Hold your mobile phone as you would any other
phone. Do not cover the top of the phone when it is
in use, as this affects call quality and may cause the
phone to operate at a higher power level than needed,
thus shortening talk and standby times.
For other medical devices, please consult your
physician and the manufacturer of the device.
Important information
This is the Internet version of the user's guide. © Print only for private use.
73
For phones sold in the US, before a phone model
is available for sale to the public, it must be tested
and certified by the Federal Communications
Commission (FCC) that it does not exceed the limit
established by the government-adopted requirement
for safe exposure. The tests are performed in
positions and locations (that is, at the ear and worn
on the body) as required by the FCC for each model.
For body-worn operation, this phone has been tested
and meets FCC RF exposure guidelines when the
handset is positioned a minimum of 15 mm from
the body without any metal parts in the vicinity
of the phone or when used with the original
Sony Ericsson accessory intended for this phone
and worn on the body. Use of other accessories
may not ensure compliance with FCC RF exposure
guidelines.
Radio frequency (RF) exposure and
Specific Absorption Rate (SAR)
Your mobile phone is a low-power radio transmitter
and receiver. When it is turned on, it emits low levels
of radio frequency energy (also known as radio waves
or radio frequency fields).
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organizations, e.g. ICNIRP
(International Commission on Non-Ionizing Radiation
Protection) and IEEE (The Institute of Electrical and
Electronics Engineers Inc.), through periodic and
thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave
exposure for the general population. The levels
include a safety margin designed to assure the
safety of all persons, regardless of age and health,
and to account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency
energy absorbed by the body when using a mobile
phone. The SAR value is determined at the highest
certified power level in laboratory conditions, but
the actual SAR level of the mobile phone while
it is operating can be well below this value. This is
because the mobile phone is designed to use the
minimum power required to reach the network.
A separate leaflet with SAR information about this
mobile phone model is included with the material
accompanying this mobile phone. This information
can also be found, together with more information
on radio frequency exposure and SAR, on:
Accessible Solutions/Special Needs
For phones sold in the US, you can use your TTY
terminal with your Sony Ericsson mobile phone
(with the necessary accessory). For information
on Accessible Solutions for individuals with special
needs call the Sony Ericsson Special Needs Center
on 877 878 1996 (TTY) or 877 207 2056 (voice),
or visit the Sony Ericsson Special Needs Center at
Variations in SAR below the radio frequency
exposure guidelines do not mean that there are
variations in safety. While there may be differences
in SAR levels among mobile phones, all
Sony Ericsson mobile phone models are designed
to meet radio frequency exposure guidelines.
74
Important information
This is the Internet version of the user's guide. © Print only for private use.
Disposal of old electrical
and electronic equipment
WARNING:
If your device requires an adapter for insertion into
the handset or another device, do not insert the
card directly without the required adapter.
This symbol indicates that all electrical
and electronic equipment included
shall not be treated as household waste.
Precautions on Memory Card Use
Do not expose the memory card to moisture.
Do not touch terminal connections with your hand
or any metal object.
Do not strike, bend, or drop the memory card.
Do not attempt to disassemble or modify the memory
card.
Do not use or store the memory card in humid or
corrosive locations or in excessive heat such as
a closed car in summer, in direct sunlight or near
a heater, etc.
Instead it shall be left at the appropriate collection
point for recycling of electrical and electronic
equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The recycling of materials will help to conserve
natural resources. For more detailed information
about recycling this product, please contact your
local city office, your household waste disposal
service or the shop where you purchased the
product.
•
•
•
•
•
•
•
Do not press or bend the end of the memory card
adapter with excessive force.
Do not let dirt, dust, or foreign objects get into the
insert port of any memory card adapter.
Check you have inserted the memory card correctly.
Insert the memory card as far as it will go into any
memory card adapter needed. The memory card
may not operate properly unless fully inserted.
We recommend that you make a backup copy of
important data. We are not responsible for any loss
or damage to content you store on the memory card.
Recorded data may be damaged or lost when you
remove the memory card or memory card adapter,
turn off the power while formatting, reading or
writing data, or use the memory card in locations
subject to static electricity or high electrical field
emissions.
Disposing of the battery
•
•
Please check local regulations for
disposal of batteries or call your
local Sony Ericsson Call Centre for
information.
•
•
The battery should never be placed in municipal
waste. Use a battery disposal facility if available.
Memory Card
Your product is equipped with a memory card
reader. Check memory card compatibility before
purchase or use.
Memory cards are generally formatted prior to
shipping. To reformat the memory card, use
a compatible device. Do not use the standard
operating system format when formatting the memory
card on a PC. For details, refer to the operating
instructions of the device or contact customer
support.
Important information
This is the Internet version of the user's guide. © Print only for private use.
75
Protection of personal information
End User Licence Agreement
To safeguard your privacy and prevent information
being accessible to a third party, you should erase
all personal data before selling or disposing of the
product. To delete personal data, perform a master
reset. DELETION OF MATERIAL FROM THE
PHONE MEMORY DOES NOT ENSURE THAT
SAID INFORMATION CANNOT BE RECOVERED
BY A SUBSEQUENT USER. SONY ERICSSON
DOES NOT WARRANT AGAINST A SUBSEQUENT
USER OF THE DEVICE ACCESSING YOUR
This wireless device, including without limitation
any media delivered with the device, (“Device”)
contains software owned by Sony Ericsson Mobile
Communications AB and its affiliated companies
(“Sony Ericsson”) and its third party suppliers and
licensors (“Software”).
As user of this Device, Sony Ericsson grants you
a non-exclusive, non-transferable, non-assignable
license to use the Software solely in conjunction with
the Device on which it is installed and/or delivered
with. Nothing herein shall be construed as a sale
of the Software to a user of this Device.
You shall not reproduce, modify, distribute, reverse
engineer, decompile, otherwise alter or use any other
means to discover the source code of the Software
or any component of the Software. For avoidance
of doubt, you are at all times entitled to transfer all
rights and obligations to the Software to a third party,
solely together with the Device with which you
received the Software, provided always that such
third party agrees in writing to be bound by these
rules.
You are granted this license for a term of the useful
life of this Device. You can terminate this license
by transferring all your rights to the Device on which
you have received the Software to a third party in
writing. If you fail to comply with any of the terms
and conditions set out in this license, it will terminate
with immediate effect.
Sony Ericsson and its third party suppliers and
licensors are the sole and exclusive owner of and
retain all rights, title and interest in and to the
Software. Sony Ericsson, and, to the extent that the
Software contains material or code of a third party,
such third party, shall be entitled third party
beneficiaries of these terms.
INFORMATION AND DOES NOT ASSUME ANY
RESPONSIBILITY FOR SUBSEQUENT
DISCLOSURE OF SAID INFORMATION EVEN IF
A MASTER RESET HAS BEEN PERFORMED. If you
are concerned about such potential disclosure retain
your device or secure its permanent destruction.
Accessories
Sony Ericsson recommends use of Sony Ericsson
original accessories for safe and efficient use of
its products. Use of third-party accessories may
decrease performance or pose a risk to your health
or safety.
LOUDNESS WARNING:
Please adjust the audio volume cautiously when
using third-party audio accessories to avoid volume
levels that may be harmful to your hearing.
Sony Ericsson does not test use of third-party audio
accessories with this mobile phone. Sony Ericsson
recommends using only Sony Ericsson original
audio accessories.
The validity, construction and performance of this
license shall be governed by the laws of Sweden.
The foregoing shall apply to the full extent permitted
by, when applicable, statutory consumer rights.
76
Important information
This is the Internet version of the user's guide. © Print only for private use.
Please note that some of your personal settings,
downloads and other information may be lost when
your Sony Ericsson Product is repaired or replaced.
At present Sony Ericsson may be prevented by
applicable law, other regulation or technical
restrictions from making a backup copy of certain
downloads. Sony Ericsson does not take any
responsibility for any lost information of any kind
and will not reimburse you for any such loss. You
should always make backup copies of all the
information stored on your Sony Ericsson Product
such as downloads, calendar and contacts before
handing in your Sony Ericsson Product for repair
or replacement.
Limited Warranty
Sony Ericsson Mobile Communications AB, SE-221
88 Lund, Sweden, (Sony Ericsson) or its local
affiliated company, provides this Limited Warranty
for your mobile phone and original accessory
delivered with your mobile phone (hereinafter
referred to as “Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased,
or contact your local Sony Ericsson Call Centre
(national rates may apply) or visit
www.sonyericsson.com to get further information.
Our warranty
Conditions
Subject to the conditions of this Limited Warranty,
Sony Ericsson warrants this Product to be free from
defects in design, material and workmanship at the
time of its original purchase by a consumer. This
Limited Warranty will last for a period of one (1) year
as from the original date of purchase of the Product.
1
2
This Limited Warranty is valid only if the original
proof of purchase for this Product issued by a
Sony Ericsson authorized dealer specifying the date
of purchase and serial number**, is presented with
the Product to be repaired or replaced. Sony Ericsson
reserves the right to refuse warranty service if this
information has been removed or changed after the
original purchase of the Product from the dealer.
If Sony Ericsson repairs or replaces the Product,
the repair for the defect concerned, or the replaced
Product shall be warranted for the remaining time
of the original warranty period or for ninety (90) days
from the date of repair, whichever is longer. Repair
or replacement may involve the use of functionally
equivalent reconditioned units. Replaced parts
or components will become the property of
Sony Ericsson.
What we will do
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects
in design, materials or workmanship, Sony Ericsson
authorized distributors or service partners, in the
country* where you purchased the Product, will, at
their option, either repair or replace the Product in
accordance with the terms and conditions stipulated
herein.
Sony Ericsson and its service partners reserve the
right to charge a handling fee if a returned Product
is found not to be under warranty according to the
conditions below.
Important information
This is the Internet version of the user's guide. © Print only for private use.
77
3
This warranty does not cover any failure of the
Product due to normal tear and wear, or due to
misuse, including but not limited to use in other than
the normal and customary manner, in accordance
with the Sony Ericsson instructions for use and
maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident,
software or hardware modification or adjustment,
acts of God or damage resulting from liquid.
5
6
This warranty does not cover Product failures caused
by installations, modifications, or repair or opening
of the Product performed by a non-Sony Ericsson
authorised person.
The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Sony Ericsson
branded original accessories intended for use with
the Product.
7
8
Tampering with any of the seals on the Product will
void the warranty.
A rechargeable battery can be charged and
discharged more than a hundred times. However,
it will eventually wear out – this is not a defect and
corresponds to normal wear and tear. When the
talk-time or standby time is noticeably shorter,
it is time to replace your battery. Sony Ericsson
recommends that you use only batteries and chargers
approved by Sony Ericsson.
Minor variations in display brightness and colour
may occur between the phones. There may be tiny
bright or dark dots on the display. These are called
defective pixels and occur when individual dots
have malfunctioned and can not be adjusted. Two
defective pixels are deemed acceptable.
Minor variations in camera image appearance may
occur between phones. This is nothing uncommon
and is not regarded as a defective camera module.
Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or
range of that system.
THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER THAN
THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED
TO LOST PROFITS OR COMMERCIAL LOSS; TO
THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion
or limitation of incidental or consequential damages,
or limitation of the duration of implied warranties,
so the preceding limitations or exclusions may not
apply to you.
The warranty provided does not affect the
consumer's statutory rights under applicable
legislation in force, nor the consumer’s rights
against the dealer arising from their sales /
purchase contract.
4
78
Important information
This is the Internet version of the user's guide. © Print only for private use.
*Geographical scope of the warranty
Declaration of Conformity
If you have purchased your Product in a country
member of the European Economic Area (EEA) or
in Switzerland or the Republic of Turkey, and such
Product was intended for sale in the EEA or in
Switzerland or in Turkey, you can have your Product
serviced in any EEA country or in Switzerland or in
Turkey, under the warranty conditions prevailing in
the country in which you require servicing, provided
that an identical Product is sold in such country by
an authorised Sony Ericsson distributor. To find out
if your Product is sold in the country you are in,
please call the local Sony Ericsson Call Centre.
Please observe that certain services may not be
possible elsewhere than in the country of original
purchase, for example due to the fact that your
Product may have an interior or exterior which is
different from equivalent models sold in other
countries. Please note in addition that it may
sometimes not be possible to repair SIM-locked
Products.
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our
product
Sony Ericsson type AAD-3022101-BV
and in combination with our accessories, to
which this declaration relates is in conformity
with the appropriate standards 3GPP TS 51.010-1,
EN 301908-1, EN 301908-2, EN 301489-7,
EN 301489-24, EN 300328, EN 301489-17 and
EN 60950, following the provisions of, Radio
Equipment and Telecommunication Terminal
Equipment directive 99/5/EC with requirements
covering EMC directive 89/336/EEC, and Low
Voltage directive 73/23/EEC.
Lund, May 2007
** In some countries/regions additional information
(such as a valid warranty card) may be requested.
FCC Statement
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and
Shoji Nemoto,
Head of Product Business Group GSM/UMTS
We fulfil the requirements of the R&TTE Directive
(99/5/EC).
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Important information
This is the Internet version of the user's guide. © Print only for private use.
79
E
L
email ..................................................... 34 language ............................................... 15
entering text ......................................... 15 limited warranty .................................... 77
lock
F
G
M
messages
H
I
Internet
J
K
keypad lock .......................................... 66 my numbers ......................................... 27
Index
81
This is the Internet version of the user's guide. © Print only for private use.
N
S
navigating menus ................................. 12 safety guidelines ...................................72
P
PIN code
settings
SIM card
R
82
Index
This is the Internet version of the user's guide. © Print only for private use.
T
U
T9™ Text Input .................................... 15 unblock SIM card ................................. 65
tasks ..................................................... 61 update service ...................................... 58
V
transfer method
transferring
turning on/off
volume
W
Z
Index
This is the Internet version of the user's guide. © Print only for private use.
83
|