Sony Ericsson J220C User Manual

This is the Internet version of the user's guide. © Print only for private use.  
Sony Ericsson  
GSM 900/1800  
This user guide is published by Sony Ericsson Mobile  
Communications AB, without any warranty. Improvements  
and changes to this user guide necessitated by  
typographical errors, inaccuracies of current information,  
or improvements to programs and/or equipment, may be  
made by Sony Ericsson Mobile Communications AB at any  
time and without notice. Such changes will, however, be  
incorporated into new editions of this user guide.  
All rights reserved.  
© Sony Ericsson Mobile Communications AB, 2005  
Publication number: EN/LZT 108 8129 R1A.  
Please note:  
Some of the services in this user guide are not supported by  
all networks. This also applies to the GSM International  
Emergency Number 112.  
Please contact your network operator or service provider if  
you are in doubt whether you can use a particular service  
or not.  
Please read the Guidelines for safe and efficient use and  
the Limited warranty chapters before you use your mobile  
phone.  
T9™ Text Input is a trademark or a registered trademark of  
Tegic Communications.  
T9™ Text Input is licensed under one or more of the  
following:  
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,  
and 6,011,554;  
Canadian Pat. No. 1,331,057;  
2
This is the Internet version of the user's guide. © Print only for private use.  
 
United Kingdom Pat. No. 2238414B;  
Hong Kong Standard Pat. No. HK0940329;  
Republic of Singapore Pat. No. 51383;  
Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT,  
NL, PT, ES, SE, GB; and additional patents are pending  
worldwide.  
Your mobile phone has the capability to download, store  
and forward additional content, e.g. ringtones. The use of  
such content may be restricted or prohibited by rights of  
third parties, including but not limited to restriction under  
applicable copyright laws. You, and not Sony Ericsson, are  
entirely responsible for additional content that you  
download to or forward from your mobile phone. Prior to  
your use of any additional content, please verify that your  
intended use is properly licensed or is otherwise authorized.  
Sony Ericsson does not guarantee the accuracy, integrity or  
quality of any additional content or any other third party  
content. Under no circumstances will Sony Ericsson be  
liable in any way for your improper use of additional content  
or other third party content.  
Other product and company names may be the trademarks  
of their respective owners.  
Any rights not expressly granted herein are reserved.  
Note: Sony Ericsson advises users to backup their personal  
data information.  
All illustrations are for illustration only and may not  
accurately depict the actual phone.  
3
This is the Internet version of the user's guide. © Print only for private use.  
Getting to know your phone  
No key  
Power on/off  
Yes key  
Navigation  
key  
Option key  
Clear key  
4
This is the Internet version of the user's guide. © Print only for private use.  
 
Assembling your phone  
Before you can use your phone you need to:  
Insert the SIM card.  
Attach and charge the battery.  
User guide symbols  
The following symbols appear in this user guide:  
}
Use the navigation key to scroll and select.  
See also page.xx  
%
Important  
Note  
This symbol indicates that a service or function is  
network- or subscription-dependent. Because of this,  
all menus may not be available in your phone. Please  
consult your network operator for more information.  
SIM card and battery information  
The SIM (Subscriber Identity Module) card, which you get  
from your network operator, contains information about your  
subscription and phonebook. Always turn off the phone and  
detach the charger before you insert or remove a SIM card.  
If you have been using a SIM card in another phone,  
make sure that your information is saved to the SIM  
card before you remove it from the other phone.  
% 23 Phonebook.  
5
This is the Internet version of the user's guide. © Print only for private use.  
To insert the SIM card and battery  
6
This is the Internet version of the user's guide. © Print only for private use.  
   
1
2
3
Press to release the cover as shown in the picture.  
Gently pull the cover away from the phone.  
Insert the SIM card. Make sure the SIM card is placed  
under the silvery holders.  
4
Place the battery on the back of the phone with the label  
side up and the connectors facing each other.  
Replace the cover as shown in the picture.  
Press to close the cover.  
5
6
To charge the battery  
1
2
3
Connect the charger to the phone. The flash symbol on  
the charger plug must face upwards.  
It may take up to 30 minutes before the battery icon  
appears on the screen.  
Wait approximately 4 hours or until the battery icon  
indicates that the battery is fully charged. If you do not  
see the battery icon after this time, press any key to  
activate the screen.  
4
Remove the charger by pulling it out.  
The time and date are reset when you remove the  
battery.  
7
This is the Internet version of the user's guide. © Print only for private use.  
   
PIN  
You may need a PIN (Personal Identification Number) to  
activate the services in your phone. Your PIN is provided by  
your network operator.  
If you make a mistake while entering your PIN, delete the  
number by pressing  
.
If you enter the wrong PIN three times in a row, the  
SIM card is blocked and the message PIN blocked  
appears. To unblock it, you need to enter your PUK  
(Personal Unblocking Key), % 69 SIM card lock.  
To turn the phone on and off  
Press and hold  
Enter your PIN, if requested.  
Press and hold to turn off the phone.  
.
To make and receive calls  
Enter the area code and phone number } YES to make the  
call.  
} NO to end the call.  
When the phone rings, } YES.  
8
This is the Internet version of the user's guide. © Print only for private use.  
       
Icons  
The following icons appear on the desktop and in the status  
bar.  
Tells you the status of the battery.  
Tells you the strength of the GSM network signal.  
Calls – handling of call time, call cost information  
and ongoing calls.  
Internet services – gives you access to Internet  
services.  
Alarms – alarm clock and recurrent alarm.  
Fun & Games – games and applications.  
Messaging – handling of text (SMS), picture (MMS)  
and voice messages.  
Silent – set the phone to silent. The alarm clock  
rings even if the phone is set to silent.  
Organizer – calendar, tasks, timer and other extras.  
Phonebook – your personal phonebook.  
Settings – personal settings including profiles,  
display, language, connectivity, time and locks.  
9
This is the Internet version of the user's guide. © Print only for private use.  
   
Main menu view  
Change the main menu view from multiple to single icons.  
To change the main menu view  
1
2
} Settings } YES } Display } YES } Main meu view } YES.  
Select Grid view or List view.  
Navigating the menus  
Press  
Press  
(navigation key) to go to the desktop.  
to move through the menus.  
Press NO to go back one level in the menus.  
Press and hold NO to return to standby.  
Shortcuts  
From standby, you can use the navigation key to go directly  
to a function.  
Press  
Press  
Press  
Press  
to write a message.  
to access My shortcuts.  
to set an alarm.  
to enter the phonebook.  
To create a shortcut  
1
} Settings } YES } My shortcuts } YES } Navigation key  
up } YES.  
2
Scroll to a menu item } YES.  
To access your shortcut, press  
.
10  
This is the Internet version of the user's guide. © Print only for private use.  
 
Menu overview  
1.Calls  
2.Internet services 3.Alarms  
Missed calls  
Sony Ericsson  
Bookmarks  
Enter address  
Push inbox  
Options  
Alarm  
Call list  
Recurrent alarm  
Manage calls  
Time and cost  
Switch to line 2*  
Clear call list  
4.Fun & Games  
Games  
5.Messaging  
Text message  
Picture message  
Call voicemail  
Options  
6.Silent  
Turn on silent  
Silent off?  
My pictures  
More pictures  
My sounds  
More sounds  
Themes  
More themes  
Composer  
7.Organizer  
Calendar  
Tasks  
8.Phonebook  
Find and call  
Add number  
Find and edit  
Memory status  
Options  
9.Settings  
Sounds & alerts  
Time and date  
Display  
Timer  
Stopwatch  
Calculator  
Profiles  
Language  
Locks  
Handsfree  
Connectivity  
My shortcuts  
Master reset  
* Network- and subscription- dependent.  
11  
This is the Internet version of the user's guide. © Print only for private use.  
 
Phone language  
Most SIM cards automatically set the language used in the  
menu to the language of the country/region where you bought  
your SIM card. If this is not the case, the predefined language  
is English.  
You can always choose Automatic by pressing  
in standby mode.  
8888  
0008  
You can always choose Chinese by pressing  
in standby.  
You can always choose English by pressing  
in standby.  
0000  
To change the phone language  
1
2
} Settings } YES } Language } YES } Menus } YES.  
Select a language } YES.  
You can press  
item.  
instead of the YES key to select an  
More options  
Press  
to enter a list of options. There are different  
alternatives in the list of options depending on where you are  
in the menus.  
Delete and edit items  
Two ways to delete items  
Select an item and press  
Select an item, press  
.
} Delete.  
To edit items  
Select an item, press  
} Edit.  
12  
This is the Internet version of the user's guide. © Print only for private use.  
   
Entering letters and characters  
When writing messages and notes there are two ways to enter  
letters and characters:  
Multitap text input  
T9™ Text Input  
To enter letters using multitap input  
Press  
screen.  
Press  
until the desired character appears on the  
to shift between capital and lower-case letters.  
to enter numbers.  
to delete letters and numbers.  
for the most common punctuation marks.  
to add a space.  
Press and hold  
Press  
Press  
Press  
Multitap input only applies when Latin characters are  
selected as writing language.  
T9Text Input  
The T9™ Text Input method uses a built-in dictionary to  
recognize the most commonly used word for each  
sequence of key presses. This way, you press each key  
only once, even if the letter you want is not the first letter  
on the key.  
To enter letters using T9 Text Input  
1
For example, if you want to write the word “Jane”, press  
,
,
,
.
2
If the word shown is the one you want, press  
accept and add a space. To accept a word without adding  
a space, press . If the word shown is not the one you  
to  
want, press  
words.  
or  
repeatedly to view alternative  
13  
This is the Internet version of the user's guide. © Print only for private use.  
 
3
Continue writing your message. To enter a full stop or  
other punctuation marks, press  
and then  
or  
repeatedly. Accept and add a space by pressing  
.
To switch between writing methods  
Before, or while entering letters, press and hold  
switch between writing methods.  
to  
Options list  
Press  
to enter a list of options that offers different  
alternatives when writing a message.  
14  
This is the Internet version of the user's guide. © Print only for private use.  
Chinese input  
This mobile phone has different input methods for entering  
Chinese characters:  
Stroke input  
Pinyin input  
You can use these methods, for example, to enter Chinese  
names and Chinese short messages.  
Switching between Chinese input methods  
In the Chinese editing mode, you can select and switch  
quickly to another input method by pressing and  
holding  
.
General instructions  
Regardless of which input method you choose, your phone  
has a function to speed up the entry of Chinese characters.  
Whenever you enter a stroke or a Pinyin letter, a candidate  
row of the most frequently used characters containing that  
stroke or relating to that letter appears at the bottom of the  
screen.  
If the character you want is not displayed in the candidate  
row, press  
pressing  
to present another candidate row. Continue  
until the character you want is displayed.  
Alternatively, you can enter the next stroke or Pinyin letter  
and a new set of characters will immediately be displayed in  
the candidate row. To go back to the previous row, press  
To select a character in the candidate row, press the navigation  
key.  
.
15  
This is the Internet version of the user's guide. © Print only for private use.  
 
Stroke input  
A Chinese character is built up of strokes. There are more  
categories. Each category is represented on the keypad by  
one of the keys  
-
. The Wild Card key  
, is used  
when you are not sure of which stroke to use, % 19 For  
example, to enter “–Ýœ¢” and, % 19 Example of using the  
wild card key.  
Stroke categories  
The five stroke categories are defined in the table below:  
Number Stroke  
Basic  
Key  
Category Stroke Stroke Name  
Character  
王 十 在 七 天  
Over  
海 红 牡 状 习  
中 业 上 门 丑  
小 水 打 子 承  
直 真 质 草  
Lift  
Down  
Down-Hook  
Short  
Slope Down  
八 九 丹 风 片  
香 千 匕 后 丢  
而 页 面 学 殷  
六 学 雷 心 性  
人 火 又 送 林  
四 西 酉 酸  
Long Left Slope  
Over Slope  
Short left Slope  
Dot  
Right Slope  
Down-Curved-  
Over  
16  
This is the Internet version of the user's guide. © Print only for private use.  
 
Number Stroke  
Basic  
Key  
Category Stroke Stroke Name  
Character  
山 巨 屯 母 凶  
Down-Over  
么 去 公 约 能  
女 要 好 巡 巢  
衣 以 饭 收 长  
我 或 民 成 伐  
Left Slope-Over  
Left Slope-Dot  
Down-Lift  
Right Slope-  
Hook  
心 必 思 忘  
电 也 毛 兄 孔  
专 传 转  
Down-Over-  
Hook  
Down-Over-  
Curved-Hook  
Down-Over-Left  
Slope  
马 与 张 号 费  
鼎 鼐  
Down-Over-  
Down-Hook  
Down-Over-  
Down  
写 字 皮 通 免  
口 已 户 书 骨  
力 习 也 同 永  
Over-Hook  
Over-Down  
Over-Down-  
Hook  
又 之 登 多 社  
及 极 廷 建  
Over-Left Slope  
Over-Down-  
Over-Left Slope  
17  
This is the Internet version of the user's guide. © Print only for private use.  
Number Stroke  
Basic  
Key  
Category Stroke Stroke Name  
Character  
阿 队 陈 那 部  
Over-Left Slope-  
Curved-Hook  
乃 透 鼐 隽 杨  
Over-Down-  
Over-Hook  
Over-Down-  
Over-Down  
狗 豹 家 逐 狂  
乙 九 瓦 飞 风  
Curved-Hook  
Over-Down-  
Curved-Hook  
投 沿 船 凹  
话 计 认 讯  
Over-Down-Over  
Over-Down-Lift  
? (Wild card key)  
18  
This is the Internet version of the user's guide. © Print only for private use.  
Components  
The basic building units of Chinese characters are components  
that are made up of strokes. After entering the first two strokes  
of the desired character, the component and character  
candidates that started with that stroke are displayed in the  
candidate row.  
Using components is a fast method for entering complex  
characters.  
The smaller candidates surrounded by frames are  
components, and the bigger candidates without frames  
are characters.  
For example, to enter “ 信息 ”  
1
2
3
Enter “ ”, “ ” and “ ”.  
Move the cursor to “ ”, press  
Move the cursor to “ ”, press  
.
again to select “ ”.  
Example of using the wild card key  
The wild card key  
, is used to supplement unclear  
strokes in entering characters. If you want to enter “ ”, but  
you only know that “ ” is the first and the last stroke of the  
character and that the total number of strokes is four, enter  
,
,
,
. The character is displayed in the  
candidate row.  
Pinyin input  
Press the keys containing the required Pinyin letters, and the  
phone will make various proposals on the screen, according  
to the pronunciation rules of Mandarin.  
19  
This is the Internet version of the user's guide. © Print only for private use.  
     
Below is the key mapping of Pinyin letters on the keypad.  
Number Key  
Pinyin Letter  
a b c  
d e f  
g h i  
j k l  
m n o  
p q r s  
t u v  
w x y z  
On the keypad, the letter ü is replaced by v.  
For example, to enter “ 信息 ”  
1
2
Press  
,
,
.
When “xin” is highlighted, press  
”, then press  
or  
and select  
.
(If you want to enter any of the other suggested Pinyin  
combinations, scroll up or down to the desired  
combination, then press  
Press again to select ”, when ” is highlighted.  
).  
3
Input punctuation, symbols and smilies  
Under any Chinese input mode, press  
, to see the table  
of punctuation marks, symbols and smilies. Use the  
navigation key to make a selection. Press  
space into the text.  
to enter a  
20  
This is the Internet version of the user's guide. © Print only for private use.  
Calling  
Making and receiving calls  
Before you can make or receive calls, you must turn on the  
phone and be within range of a network, % 8 To turn the  
phone on and off.  
If your subscription includes the Calling Line Identification  
service and the caller’s number is identified, the number is  
displayed. If you have saved the number in the phonebook,  
the name and number are displayed. If the number is a  
restricted number, Withheld is displayed.  
To make a call  
Enter the area code and phone number } YES to make the call.  
} NO to end the call.  
To re-dial a number  
If the connection failed and Retry? is displayed } YES.  
Do not hold the phone to your ear while waiting.  
When the call is connected, the phone gives a loud  
signal.  
To answer a call  
} YES.  
To reject a call  
} NO.  
To change the speaker volume during a call  
Press  
or  
to increase or decrease the speaker volume  
during a call.  
21  
This is the Internet version of the user's guide. © Print only for private use.  
     
To check your missed calls  
1
When Missed calls: is displayed, } YES to display the  
missed calls.  
2
To call a number, scroll to the number } YES.  
To make international calls  
1
2
Press and hold  
Enter the country/region code, area code (without the  
leading zero) and phone number } YES.  
until a + sign appears on the screen.  
Emergency calls  
Your phone supports the international emergency numbers,  
112, 911 and 08. These numbers can normally be used to  
make an emergency call in any country/region, with or  
without a SIM card inserted, if a GSM network that supports  
these numbers is within range. Your network operator may  
have saved additional local emergency numbers on the SIM  
card.  
To make an emergency call  
Enter, for example, 112 (the international emergency  
number) } YES.  
Some network operators may require that a SIM card  
is inserted, and in some cases that the PIN has been  
entered as well.  
To view your local emergency numbers  
} Phonebook } YES } Options } YES } Special numbers } YES  
} Emergency nos. } YES.  
22  
This is the Internet version of the user's guide. © Print only for private use.  
     
Call list  
The numbers of the last calls that you have made or received  
are saved in the call list.  
To call a number from the call list  
} YES from standby and scroll to the name or number you  
want to call } YES.  
To clear the call list  
} Calls } YES } Clear call list } YES.  
Phonebook  
Your phone has a phonebook in which you can save numbers  
and accompanying names (an entry).  
To save a number together with a name  
1
2
} Phonebook } YES } Add number } YES.  
save, or select any of the numbers from the list by  
pressing YES.  
3
4
Enter a name that you want to associate with the phone  
number } YES, % 13 Entering letters and characters.  
} YES again to save the entry in the suggested position.  
Pictures and personal rings  
You can add a picture and a ringtone to phonebook entries.  
To add a picture to a phonebook entry  
1
2
3
} Phonebook } YES } Options } Picture } YES.  
} Add new? } YES.  
} YES to go to the phonebook. Scroll to the entry you  
want } YES.  
4
This takes you to Pictures. Select a picture } YES.  
23  
This is the Internet version of the user's guide. © Print only for private use.  
       
To add a ringtone to a phonebook entry  
1
} Phonebook } YES } Options } YES } Personal rings }  
YES.  
2
3
} Add new? } YES.  
Press  
to go to the phonebook. Scroll to the entry you  
want } YES.  
4
This takes you to Personal rings. Select a ringtone } YES.  
To call a number saved in the phonebook  
1
2
} Phonebook } YES } Find and call } YES.  
Enter the first letters or Chinese characters of the name  
} YES.  
3
4
If the name displayed is not the one you want, press  
or  
until you find the correct name and number.  
} YES to make the call.  
Speed dialling  
You can save the phone numbers that you wish to reach  
easily in positions  
in your phone.  
To speed dial  
From standby, enter the position number } YES.  
Shortcuts to phonebook entries  
When in standby, press and hold the keys  
to find  
an entry beginning with the first letter on that key, or the  
closest following.  
24  
This is the Internet version of the user's guide. © Print only for private use.  
   
Ask to save  
If Ask to save is on, you are asked if you want to save any  
called or answered number that is not already saved in your  
phonebook.  
Your subscription must support the Calling Line  
Identification Service, if you want to save answered  
numbers.  
To turn the Ask to save function on or off  
} Phonebook } YES } Options } YES } Ask to save } YES  
select On or Off } YES.  
To edit an entry in the phonebook  
1
2
} Phonebook } YES } Find and edit } YES.  
Enter the first letters or Chinese characters of the name  
} YES.  
3
4
5
} YES to select the entry.  
} Edit } YES.  
When you have finished editing } YES to save your  
changes.  
To delete an entry from the phonebook  
1
2
} Phonebook } YES } Find and edit } YES.  
Enter the name or the first few letters of the name } YES.  
When the entry you want to delete is highlighted } YES.  
} Delete } YES.  
3
Sort order  
You may change the sort order of your phonebook entries, so  
that they are sorted according to their position number instead  
of the name.  
25  
This is the Internet version of the user's guide. © Print only for private use.  
       
To choose a sort order  
1
2
} Phonebook } YES } Options } YES } Sort order } YES.  
Select a sort order } YES.  
When Chinese has been selected as the  
phone language and Phonebook is sorted by  
name  
To call a name written in Chinese characters  
1
} Phonebook } YES } Find and call } YES } YES. Press  
and hold  
to switch the search mode to Chinese.  
Then enter the first Pinyin letters of the name you want  
to call.  
When the name is highlighted, } YES.  
2
To call a name written in Latin characters  
1
} Phonebook } YES } Find and call } YES } YES. Press  
and hold to switch the search mode to English.  
Then enter the first letter of the name you want to call.  
When the name is highlighted, } YES.  
2
When English has been selected as the  
phone language and Phonebook is sorted by  
name  
To call a name written in Chinese characters  
1
} Phonebook } YES } Find and call } YES } YES. Scroll to  
the contact you want to call.  
2
When the name is highlighted, } YES.  
To call a name written in Latin characters  
1
} Phonebook } YES } Find and call } YES } YES. Scroll  
to, or enter the first letters of the name you want to call.  
When the name is highlighted, } YES.  
2
26  
This is the Internet version of the user's guide. © Print only for private use.  
Phonebook memories  
Phonebook entries are saved on your SIM card. The number  
of entries you can save depends on your SIM card. You can  
still access them if you use the card with another phone.  
You can also save your entries in the phone memory when  
all SIM positions are occupied.  
Choosing where to save an entry  
To save the number in the position suggested } YES.  
To save the number in another position, press  
delete the position number, enter a new position number  
} YES.  
to  
To save the number in the phone memory, you first need to  
know how many positions you have got on your SIM card.  
You can check this in the Memory status menu.  
To check the status of the memories  
} Phonebook } YES } Memory status } YES.  
Replacing entries  
If you try to save a phone number in a position which already  
contains a phone number, the message Replace? appears.  
Press YES to replace the number or press NO if you do not  
want to replace the old number.  
To delete all entries from the phone memory  
1
} Phonebook } YES } Options } YES } Delete all } YES }  
YES.  
2
Enter the phone lock code (0000 or a new code) press  
} YES . If you delete all entries from the phone memory,  
the entries on your SIM card are not deleted.  
27  
This is the Internet version of the user's guide. © Print only for private use.  
   
Copy phonebook entries  
You can copy phonebook entries between your phone  
memory and the SIM card.  
To copy entries to the SIM card  
} Phonebook } YES } Options } YES } Copy all to SIM } YES.  
To copy entries to the phone  
} Phonebook } YES } Options } YES } Copy from SIM } YES.  
Groups  
You can create a group of phonebook entries. You can then  
send a text message to all members of that group at the same  
time % 38 Text messages.  
To create a new group  
1
} Phonebook } YES } Options } YES } Groups } YES }  
Add new? } YES.  
2
3
4
5
6
Enter a name for the group } YES.  
} Add new? } YES } YES.  
Select an entry in your phonebook } YES.  
To add the next member, repeat steps 3 and 4.  
} NO to leave the menu.  
To add a member to an existing group  
Select the group you want } YES } Edit } YES } Add new? }  
YES.  
Voicemail  
If your subscription includes an answering service, callers  
can leave a voice mail message when you cannot answer a  
call.  
28  
This is the Internet version of the user's guide. © Print only for private use.  
       
Calling your voicemail service  
You can easily call your voicemail service by pressing and  
holding  
, if you have saved your voicemail number in the  
phone. You get the number from your service provider.  
To enter a voicemail number  
} Messaging } YES } Options } YES } Voicemail no. } YES.  
Call time  
During a call, the duration of the call is shown in the display.  
You can check the duration of your last call, outgoing calls  
and the total time.  
To check the call time and reset timer  
1
2
3
} Calls } YES } Time and cost } YES } Call timers } YES.  
Select an option } YES.  
Select Reset timers to reset the call time meter.  
Call cost and cost information  
Check with your network operator or service provider for  
information about these services.  
If you subscribe to cost information, you must  
enter your PIN2 to clear the cost or time counter,  
% 69 Security for information about PIN2.  
To check the call cost and reset cost meter  
1
2
3
} Calls } YES } Time and cost } YES } Call costs } YES.  
Select an option } YES.  
Select Clear total cost to reset the call cost meter.  
29  
This is the Internet version of the user's guide. © Print only for private use.  
 
Setting the call cost  
You can use the tariff function to specify the price per call  
unit. If you do not specify a price per call unit, the number of  
call units is displayed.  
To enter the price per call unit  
1
} Calls } YES } Time and cost } YES } Call costs  
} YES } Set tariff } YES.  
2
3
4
Enter your PIN2 } YES.  
Select Change tariff } YES.  
Enter the code for the currency you want, (for example  
GBP for Pounds Sterling) } YES.  
5
Enter the price per call unit } YES. To enter a decimal  
point, press  
.
Credit limit for calls  
You can enter a total amount of money that can be used for  
making calls. When the amount reaches zero, no more calls  
can be made. Please note that the credit limit is only an  
estimated value.  
To set a credit limit  
1
} Calls } YES } Time and cost } YES } Call costs } YES  
} Set credit } YES.  
2
3
4
Enter your PIN2 } YES.  
Select Change } YES.  
Enter an amount } YES.  
30  
This is the Internet version of the user's guide. © Print only for private use.  
 
Diverting calls  
If you cannot answer incoming voice or data calls, you can  
divert them to another number.  
When the Restrict calls function is on, some Divert calls  
options cannot be activated.  
For voice calls, you can choose between the following divert  
alternatives:  
All line 1 calls – divert all line 1 calls.  
All line 2 calls – divert all line 2 calls.  
When busy – divert calls if you are already on the phone.  
Not reachable – divert calls if you are unreachable.  
No reply – divert calls that you do not answer within a  
specified time limit (operator-dependent).  
To turn on a call divert  
1
2
3
4
} Calls } YES } Manage calls } YES } Divert calls } YES.  
Select a call category and then a divert alternative } YES.  
Select Activate } YES.  
Enter the phone number to which you want your calls to  
be diverted } YES, or retrieve it from the phonebook.  
To turn off a call divert  
1
2
} Calls } YES } Manage calls } YES } Divert calls } YES.  
Select a divert alternative } Cancel.  
To check the status of a call divert  
1
2
3
} Calls } YES } Manage calls } YES } Divert calls } YES.  
Select a call type } YES.  
Select the divert } YES } Get status } YES.  
31  
This is the Internet version of the user's guide. © Print only for private use.  
 
To check the status of all call diverts  
} Calls } YES } Manage calls } YES } Divert calls } YES  
} Check all } YES.  
More than one call  
You can handle more than one call simultaneously. For  
example, you can put an ongoing call on hold, while you  
make or answer a second call, and then switch between the  
two calls. You cannot answer a third call without ending one  
of the first two calls.  
During a call the Ongoing call menu replaces the Calls  
menu.  
Call waiting service  
If the call waiting service is activated, you hear a beep if you  
receive a second call during an ongoing call.  
To activate or deactivate the call waiting  
service  
} Calls } YES } Manage calls } YES } Call waiting } YES }  
Activate or Cancel.  
To make a second call  
1
} YES to put the ongoing call on hold. You can only put  
one call on hold.  
2
Enter the number you want to call } YES, or retrieve a  
number from the phonebook. To reach different options  
press  
.
To receive a second call  
To answer the second call and put the ongoing call on hold  
} Answer when the Call waiting service is activated.  
32  
This is the Internet version of the user's guide. © Print only for private use.  
 
To reject the second call and continue the ongoing call  
} Busy.  
To answer the second call and to end the ongoing call  
} Release&answer.  
Handling two calls  
When you have one ongoing call and one call on hold, you  
can do the following:  
} YES to switch between the two calls.  
Press  
} Join calls to join the two calls into a  
conference call.  
Press  
calls.  
} Transfer call . You are disconnected from both  
This service requires network operator support.  
} NO to end the ongoing call } YES to retrieve the held call.  
} NO twice to end both calls.  
Conference calls  
You can have a joint conversation (conference call) with up  
to five people. You can also put a conference on hold and  
make another call.  
There may be additional charges for calls involving  
multiple parties. Contact your service provider for  
more information.  
Creating a conference call  
To create a conference call, you must first have one ongoing  
call and one call on hold.  
33  
This is the Internet version of the user's guide. © Print only for private use.  
 
To join the two calls into a conference call  
Press } Join calls } YES.  
To add a new participant  
1
2
} YES to put the conference call on hold.  
Call the next person you wish to include in the  
conference call.  
3
Press  
} Join calls } YES. Repeat steps 1 to 3 to  
include more participants.  
To release a participant  
1
2
Press  
} Release part } YES.  
Select the participant } YES.  
To end the conference call  
} NO.  
Having a private conversation  
You can have a private conversation with one of the  
participants and put the other participants on hold.  
To start a private conversation  
1
Press  
} Extract part to select the participant that you  
want to talk with.  
Press } Join calls to resume the conference call.  
2
Restricted dialling  
You can use the restrict calls service to restrict outgoing and  
incoming calls. To use this service, you need a password  
which you get from your service provider.  
If you divert incoming calls, you cannot activate some  
Restrict calls options.  
34  
This is the Internet version of the user's guide. © Print only for private use.  
 
The following calls can be restricted:  
All outgoing – All outgoing calls.  
Outgoing intl – All outgoing international calls.  
Outg. intl roam – All outgoing international calls except to  
your home country/region.  
All incoming – All incoming calls.  
Inc. when roam – All incoming calls when you are abroad  
(when roaming).  
To turn a call restriction on or off  
1
} Calls } YES } Manage calls } YES } Restrict calls  
} YES.  
2
3
4
Select an option } YES.  
Select Activate or Cancel } YES.  
Enter your PIN } YES.  
Fixed dialling  
The fixed dialling function allows calls to be made only to  
certain numbers saved on the SIM card.  
Fixed dialling requires a SIM card that allows fixed  
numbers to be saved. The fixed numbers are protected by  
your PIN2. You can save partial numbers or numbers with  
question marks.  
Partial numbers: Saving 0123456 allows calls to be made  
to all numbers starting with 0123456.  
Numbers with question marks: Saving 01234567?0,  
allows calls to be made to numbers from 0123456700 to  
0123456790. To enter a question mark, press and hold  
.
Calls to international emergency numbers can still be  
made, even when the fixed dialling function is on.  
35  
This is the Internet version of the user's guide. © Print only for private use.  
   
Closed user groups  
The closed user group function is a way of lowering call  
costs. On some networks it is cheaper to make calls within a  
call group. You can save ten groups.  
To add a group  
1
} Calls } YES } Manage calls } YES } Closed groups  
} YES } Edit list } YES.  
2
3
4
} Add new? } YES.  
Enter the name of the user group } YES.  
Enter the index number } YES. You get the index number  
from your operator.  
To activate a group  
1
} Calls } YES } Manage calls } YES } Closed groups  
} YES } Edit list } YES.  
2
3
Select a group } YES.  
} Activate } YES. Calls can only be made within the  
selected group.  
To call outside a closed user group  
} Calls } YES } Manage calls } YES } Closed groups } YES  
} Open calls } On.  
Accept calls  
With the accept calls service, you can choose to receive calls  
only from certain numbers.  
To add numbers to the accepted callers list  
1
} Calls } YES } Manage calls } YES } Accept calls } YES  
} Accepted list } YES.  
2
3
} Add new? } YES.  
Select an option } YES.  
36  
This is the Internet version of the user's guide. © Print only for private use.  
   
4
Select an entry } YES.  
To select an accept option  
} Calls } YES } Manage calls } YES } Accept calls } YES  
} Accept options } YES select an option } YES.  
Additional calling functions  
Tone signals  
You can use telephone banking services or control an  
answering machine by sending tone signals (also known as  
DTMF tones or touch tones) during a call.  
To send and clear tones  
Press the keys  
,
and  
.
To clear the display after a call } NO.  
Notepad  
You can use the phone to make a note of a phone number  
during a call. When you press the number keys, the person  
you are talking to hears tone signals. To turn these tone  
signals off during the call, press  
When you end the call, the number remains in the display. To  
} Turn off tones } YES.  
call the number } YES.  
Showing or hiding your number  
If your subscription supports CLIR (Calling Line  
Identification Restriction), you can hide your phone number  
when making a call.  
To show or hide your phone number  
1
2
Enter the phone number you want to call, press  
.
} Hide my number or Show my numb. } YES.  
37  
This is the Internet version of the user's guide. © Print only for private use.  
Messaging  
Service numbers  
You must have a service centre number before you can send a  
text message. This number is provided by your operator. If it  
is not saved on your SIM card, you must specify the number  
yourself.  
To check the number to your service centre  
1
} Messaging } YES } Text message } YES } Options }  
YES } Service centres } YES. If no number is found } Add  
new? } YES.  
2
Enter the number, including the international + sign and  
country/region code } YES.  
Text messages  
You can use the SMS (Short Message Service) to send and  
receive text messages. Text messages can contain pictures  
and sound effects.  
To send a text message  
1
2
3
4
} Messaging } YES } Text message } YES } Write new  
} YES.  
Enter your message } YES, % 13 Entering letters and  
characters.  
Enter the recipient’s phone number or retrieve it from the  
phonebook by pressing  
.
} YES to send the message.  
To insert an item in a text message  
1
} Messaging } YES } Text message } YES } Write new  
} YES.  
2
Press  
to enter the option menu.  
38  
This is the Internet version of the user's guide. © Print only for private use.  
               
3
4
5
Select Add symbol or Insert item } YES.  
Select Picture, Sound effect, Melody or Animation } YES.  
Select an object or symbol } YES. } YES again to  
confirm.  
Sending a text message to a group  
You can send text messages to groups that you have specified  
and saved in your phonebook, % 28 Groups. You will be  
charged for each group member.  
To send a text message to a group  
1
} Messaging } YES } Text message } YES } Write new  
} YES.  
2
3
4
Enter your message } YES.  
Press  
} Groups } YES.  
Select a group } YES.  
Text formatting  
You can change the style, size and alignment of the text in a  
text message.  
To format the text in a text message  
1
} Messaging } YES } Text message } YES } Write new  
} YES.  
2
3
4
Write the text message.  
Press  
} Text format } YES.  
Select Text size, Text style, Alignment or New paragr.  
} YES. Select a format } YES.  
Text formatting only applies when Latin characters  
are used.  
39  
This is the Internet version of the user's guide. © Print only for private use.  
Long messages  
The maximum number of characters that a text message can  
contain depends on the writing language. You can send a  
longer message by linking two or more messages. You are  
charged for the number of linked messages.  
To turn long messages on  
} Messaging } YES } Text message } YES } Options } YES  
} Long messages } YES } On } YES.  
Check with your service provider for the maximum  
number of messages that can be linked.  
Message options  
You can set a default value for the message options below, or  
you can turn on the Set on send option which means that you  
choose the settings each time you send a message.  
Text message type – The phone supports different types of  
messages. Your service provider may offer the facility of  
converting a text message into a format (email, for  
example) that suits the equipment that is going to receive  
the message.  
Validity period – If your message cannot be delivered, your  
service centre can save the message to send it later.  
Request reply – Include a reply request if you want the  
recipient of your message to reply.  
This service requires network operator support.  
Status request – Check if a message has been delivered.  
40  
This is the Internet version of the user's guide. © Print only for private use.  
 
To set a default message option  
1
2
3
} Messaging } YES } Text message } YES } Options  
} YES.  
Select Text message type, Validity period, Request reply,  
or Status request } YES.  
Select an option from the list } YES.  
Templates  
If you have one or more messages that you send often,  
you can save these as templates.  
To create a template  
1
} Messaging } YES } Text message } YES } Templates  
} YES } Add new? } YES.  
Enter the message } YES to save the template.  
2
To use a template  
Select a template from the Templates list in the Messaging  
menu, and proceed as described on % 38 To send a text  
message.  
To check the number of sent messages  
} Calls } YES } Time and cost } YES } Text msg counter } YES  
} Show counter } YES.  
To reset the message counter  
} Calls } YES } Time and cost } YES } Text msg counter } YES  
} Reset counter } YES.  
Receiving a message  
When you receive a message, press YES to read the message  
now or NO to read the message later.  
41  
This is the Internet version of the user's guide. © Print only for private use.  
To reply to a message  
1
2
3
When you have read the message } YES.  
} Reply } YES.  
Select the message you want to send as a reply } YES.  
You can choose between: Write new, Include this msg or  
a template if available.  
4
Write your message } YES.  
To forward a message  
1
2
When you have read the message } YES.  
} Forward } YES. Continue in the same way as when  
sending a new text message.  
To call a phone number found in a message  
When the number is highlighted } YES.  
To call the sender of the message  
1
2
When you have read the message } YES.  
} Call } YES.  
To delete a message  
When you have read the message } YES } Delete } YES.  
Saving incoming messages  
Text messages are automatically saved in the phone memory.  
When the phone memory is full, they are automatically saved  
on the SIM card. When both phone memory and SIM card  
memory are full, you must delete messages to be able to  
receive new messages. Messages that you have saved on the  
SIM card can remain there until you have deleted them.  
To save a message on the SIM card  
When you have read the message } YES } Save on SIM } YES.  
42  
This is the Internet version of the user's guide. © Print only for private use.  
         
Picture messages  
Picture messages can contain text, pictures and sounds. They  
are sent via MMS (Multimedia Messaging Service) to a  
mobile phone or via email. The sender and receiver of a  
picture message must have a subscription that supports  
MMS.  
Before you start  
Make sure you have the following settings:  
An address to your service centre.  
A specific WAP profile for multimedia messages.  
Contact your network operator to automatically  
download settings or for more information. You can  
to get the settings you need.  
To enter the service centre address  
} Messaging } YES } Picture message } YES } Options } YES  
} Message server } YES.  
1
} Messaging } YES } Picture message } YES } Options  
} YES } Internet profile } YES.  
2
Select Select or Create new. % 59 To enter Internet profile  
settings manually.  
You can access WAP (Wireless Application Protocol)  
services via Internet services on the desktop.  
More options  
You can set different options for sending and receiving  
picture messages.  
43  
This is the Internet version of the user's guide. © Print only for private use.  
 
To edit an option  
} Messaging } YES } Picture message } YES } Options } YES.  
To write and send a picture message  
1
} Messaging } YES } Picture message } YES } Write new  
} YES.  
2
3
4
5
Select from the submenus } YES.  
Enter the information you want to send } YES.  
} YES to add other items or more options.  
} YES } Send message } YES. Enter the recipient’s phone  
number or retrieve it from the phonebook by pressing  
} YES.  
To view a picture message  
} YES. The message is automatically displayed. Press any key  
to stop.  
When you have viewed a picture message, you can use the  
navigation key to scroll through the message again. When an  
item is highlighted, press  
to save it in your phone.  
When you have read the message, } Proceed, to select one  
of the following options: View again, Information, Reply,  
Reply all, Forward, Save template,Call or Delete. } NO to close  
the message.  
Area information  
Area information, for example, a local traffic report, is sent to  
all subscribers in a certain network area. You cannot save  
area messages.  
To turn area information on or off  
1
} Messaging } YES } Options } YES } Area info } YES }  
Reception } YES.  
} On or Off } YES.  
2
44  
This is the Internet version of the user's guide. © Print only for private use.  
Cell information  
The cell information channel is used by some network  
operators for sending messages to their subscribers within a  
certain network area.  
To turn the cell information channel on or off  
1
} Messaging } YES } Options } YES } Area info } YES }  
Cell information } YES.  
Select On or Off } YES.  
2
45  
This is the Internet version of the user's guide. © Print only for private use.  
Personalizing your phone  
To change a Style-Up cover  
1
2
3
4
Press to release the back cover as shown in the picture.  
Pull the back cover away from the phone.  
Gently lift the release catch to remove the front cover.  
Make sure the keypad is in place, and gently press the  
front cover onto the phone.  
46  
This is the Internet version of the user's guide. © Print only for private use.  
   
Themes  
You can change the appearance of the display by using  
themes. Your phone comes with a number of predefined  
themes.  
To select a theme  
} Fun & Games } YES } Themes } YES.  
To adjust the display contrast  
} Settings } YES } Display } YES } Contrast } YES.  
Pictures  
Your phone comes with a number of pictures. All pictures are  
saved in My pictures in the Fun & Games menu.  
You can:  
Set a picture as a wallpaper when in standby mode.  
Assign a picture to an entry in the phonebook.  
Insert a picture in a picture message.  
Download a picture from the Internet.  
Handling pictures  
You can also add, delete or rename pictures in My pictures.  
The number of pictures that can be saved depends on available  
memory. File types supported are GIF, JPEG and WBMP.  
You cannot rename or delete predefined pictures.  
47  
This is the Internet version of the user's guide. © Print only for private use.  
   
To view your pictures  
1
2
} Fun & Games } YES } My pictures } YES.  
The pictures are shown in thumbnail view. To get a full  
view } YES.  
Animations can only be viewed when inserting an item  
in a text message, % 38 To insert an item in a text  
message.  
To select a picture as wallpaper  
1
} Settings } YES } Display } YES } Wallpaper } YES  
} Select picture } YES.  
Select a picture } YES.  
2
To turn the wallpaper on or off  
} Settings } YES } Display } YES } Wallpaper } YES  
} Activate, select On or Off.  
You can send and receive pictures in picture messages. For  
more information on sending pictures in messages,  
% 38 Messaging.  
You are not allowed to exchange copyright-protected  
material.  
To send a picture  
1
2
3
} Fun & Games } YES } My pictures } YES.  
Select a picture } YES. Press  
.
} Send } YES and write a message.  
48  
This is the Internet version of the user's guide. © Print only for private use.  
       
To receive a picture via a message  
When you receive a picture via a message, a new message  
appears in your inbox. Highlight the picture in the message  
by using the navigation key to select it, press  
} Save to save it in My pictures.  
Ringtones and melodies  
Your phone comes with a number of standard and polyphonic  
melodies which can be used as ringtones. You can create and  
edit melodies, and send them to a friend in a text message.  
You can also download new melodies from the Internet.  
You are not allowed to exchange copyright-protected  
material.  
To select a ringtone  
} Settings } YES } Sounds & alerts } YES } Ringtone  
} YES.  
To set the ringtone volume  
1
} Settings } YES } Sounds & alerts } YES } Ring volume  
} YES.  
2
3
Press  
or  
to decrease or increase the volume.  
} YES to save the setting.  
To turn the ringtone on or off  
There are two ways to turn on or off the ringtone:  
} Silent } YES } Turn on silent or Silent off? } YES.  
Press  
from standby, and select Turn on silent or Turn  
off silent. All signals except the alarm and timer signals are  
turned off.  
49  
This is the Internet version of the user's guide. © Print only for private use.  
   
To compose your own ringtone  
You can compose your own personal ringtones.  
Options available when composing a ringtone are:  
Press a key to enter a note. Press and hold the key to make  
it a long note.  
Press  
Press  
Press  
Press  
to raise the note one octave.  
once to raise the note one semitone.  
twice to lower the note one semitone.  
to remove notes.  
To compose a ringtone  
1
2
} Fun & Games } YES } Composer } YES.  
Compose your ringtone using the options described  
above.  
3
4
To listen to your ringtone } YES.  
Press YES again to save and name it, or NO to continue  
composing.  
Exchanging ringtones and melodies  
You can send and receive a sound, ringtone or melody via  
picture messages or download it from the Internet.  
You cannot exchange a polyphonic melody via text  
messages.  
To send a melody  
1
2
3
} Fun & Games } YES } My sounds } YES.  
Select a melody and press  
.
} Send } YES.  
50  
This is the Internet version of the user's guide. © Print only for private use.  
Increasing ring  
You can choose a ringtone that rises in steps from the lowest  
volume to the highest, or you can choose a ringtone with a  
constant volume.  
To turn increasing ring on or off  
} Settings } YES } Sounds & alerts } YES } Increasing ring.  
Select On or Off.  
Sounds & alerts  
You can choose to be notified of an incoming call by the  
buzzing of the vibrating alert. You can set the phone’s  
vibrating alert to On, On if silent or Off.  
From Sounds & alerts in the Settings menu, you can also  
select:  
Message alert when messages are received.  
Key sound when using the keypad.  
To set the vibrating alert  
1
} Settings } YES } Sounds & alerts } YES } Vibrating  
alert } YES.  
Select the setting you want } YES.  
2
Display light  
The display light can be set to On or Automatic. Automatic is  
the default setting for the display light and is designed to  
optimize standby time. In automatic mode, the display light is  
turned off a few seconds after you last press a key.  
If set to On, the display light consumes extra battery  
power and reduces standby time.  
51  
This is the Internet version of the user's guide. © Print only for private use.  
     
To activate the screen  
Press from standby.  
To set the display light  
} Settings } YES } Display } YES } Light } YES.  
To set the display contrast  
} Settings } YES } Display } YES } Contrast } YES.  
Time and date  
To set the time  
} Settings } YES } Time and date } YES } Set time } YES.  
To set the time format  
} Settings } YES } Time and date } YES } Time format } YES.  
To set the date  
} Settings } YES } Time and date } YES } Set date } YES.  
To set the date format  
} Settings } YES } Time and date } YES } Date format } YES.  
Answering mode  
When using a portable handsfree kit, you can choose to  
answer a call by pressing any key (except the NO key), or  
setting the phone to answer the call automatically.  
To select answering mode  
} Settings } YES } Handsfree } YES } Answering mode } YES.  
My phone numbers  
You can check your own phone number(s).  
52  
This is the Internet version of the user's guide. © Print only for private use.  
       
To check your phone number  
} Phonebook } YES } Options } YES } Special numbers } YES  
} My numbers } YES. If your number is not saved on your  
SIM card, you can enter it yourself.  
Profiles  
Your phone has predefined profiles which are set to suit a  
certain environment. You can rename or change these profiles.  
To select a profile  
} Settings } YES } Profiles } YES } Select profile } YES.  
To change a profile setting  
1
2
3
} Settings } YES } Profiles } YES } Edit profile } YES.  
Select a setting } YES.  
Change the profile settings } YES to confirm.  
To rename a profile  
} Settings } YES } Profiles } YES } Edit profile } YES  
} Profile name } YES.  
The normal profile name cannot be changed.  
To reset all profiles  
} Settings } YES } Profiles } YES } Reset profiles } YES.  
Master reset  
If Reset settings is selected, some settings in the phone will  
be lost.  
53  
This is the Internet version of the user's guide. © Print only for private use.  
     
If you also want to delete all phonebook entries, messages  
and other personal data, select Reset all instead.  
If you select Reset all, content such as melodies and  
pictures that you have downloaded, received or edited  
is also deleted.  
To reset the phone  
1
2
3
} Settings } YES } Master reset } YES.  
Select Reset settings or Reset all } YES.  
Enter the phone lock code (0000 or a new code) } YES.  
54  
This is the Internet version of the user's guide. © Print only for private use.  
Internet  
Setting up the Internet  
In order to use the Internet the following are required:  
A phone subscription that supports data transmission.  
Settings entered in your phone.  
You may also have to register as an Internet user with your  
service provider or network operator.  
Receiving settings in a text message  
Your GSM network operator or Internet service provider may  
be able to send your settings direct to your phone in a text  
message (SMS).  
Request settings from Sony Ericsson  
Use a PC to go to www.sonyericsson.com/cn to request that a  
text message with the settings be sent to your phone.  
To install settings  
appears:  
Press YES to install the new settings. If settings already  
exist in your phone you can either keep or replace them,  
% 56 Advanced setting information.  
Press NO to cancel installation.  
After installation, % 61 Using the Internet browser.  
Set up with the wizard  
If your phone is not set up for Internet, you can ask your  
network operator or service provider to provide you with  
Internet settings information. Then you can simply use the  
wizard in your phone to help guide you through the relevant  
settings.  
55  
This is the Internet version of the user's guide. © Print only for private use.  
     
To use the wizard for setting up Internet  
1
} Internet services } YES } homepage (for example Sony  
Ericsson) } YES. The wizard now starts if no settings  
exist.  
2
Enter and save settings when asked, press YES to confirm.  
More information about setting up is available in the  
Getting Started Guides at www.sonyericsson.com/cn  
Advanced setting information  
Some advanced settings that are described in the following  
texts may not be mandatory, please consult your network  
operator or service provider for more information.  
A data account includes connection settings for access to  
a server at your service provider, for example via WAP or via  
email.  
An Internet profile includes user settings that allow Web  
browsing.  
To use the Web browser, via an Internet service provider,  
you need settings for a specific data account for Internet,  
and an Internet profile.  
To send a text message (SMS) to an email address via your  
network operator, you need to set an email gateway phone  
number.  
Data account settings  
You can have several data accounts saved in your phone,  
with different settings for different purposes. The main  
56  
This is the Internet version of the user's guide. © Print only for private use.  
   
setting for a data account is the Account type (connection  
method).  
If there are no data account or Internet profile settings  
in your phone, you can enter data account settings  
when you enter Internet profile settings.  
You can choose from GPRS data or GSM data account types.  
If you want to change access type, you have to create a new  
data account and select the access type you want to use.  
GPRS  
GPRS (General Packet Radio Service) allows fast and  
efficient access where you can always be online. You need  
a subscription that supports GPRS.  
GPRS settings that are available:  
APN (Access point name address) – the address of the  
external network you want to connect to, either an IP  
address or a text string.  
Username – your username to log on to an external  
network.  
Password – your password to log on to an external  
network.  
Passwd request – if this setting is on, you are asked for  
a password each time you log on to the external network.  
Allow calls (Preferred service) – if you want to be able  
to accept incoming calls during a GPRS session, select  
Automatic. If not, select GPRS only.  
IP address – the IP address that the phone uses when  
communicating with the network. If you do not enter an  
address, the network provides you with a temporary IP  
address.  
57  
This is the Internet version of the user's guide. © Print only for private use.  
 
DNS address – if the network does not provide the IP  
address to the DNS server automatically, you may enter it  
here.  
Advan. settings (Advanced settings) – these are optional.  
Consult your network operator.  
GSM  
GSM settings include some settings that are similar to GPRS  
settings and some that are GSM specific as follows:  
Phone number – the phone number of your Internet service  
provider.  
Data rate – select the speed you want for the connection.  
Dial type – select Analogue or ISDN connection.  
To create a data account manually  
1
2
3
} Settings } Connectivity } YES } Data comm. } YES  
} Data accounts } YES } Add account? } YES.  
Select an account type for access and enter a name for  
the data account.  
Enter the settings that you have received from your  
network operator or service provider. } YES to confirm  
each setting.  
4
Save? } YES.  
To edit a data account  
1
} Settings } Connectivity } YES } Data comm. } YES  
} Data accounts } YES.  
2
3
4
Select a data account } YES.  
} Edit.  
Select the setting you want to edit } YES. Edit the setting  
} YES.  
5
Repeat step 4 for other settings you want to edit.  
58  
This is the Internet version of the user's guide. © Print only for private use.  
 
Preferred service  
You can set GPRS or GSM as the preferred service.  
To select preferred service  
} Settings } Connectivity } YES } Data comm. } YES } Pref.  
service } YES and select GPRS and GSM or GSM only } YES.  
Internet profile settings  
The Internet settings are stored in an Internet profile. In most  
cases you only need to use one profile to access the Internet.  
You set up and use additional Internet profiles, for example,  
when accessing secure Internet sites. You then simply switch  
between profiles when you need to change the network  
connection.  
Make sure you have a data account set up between your  
phone and the Internet server, as described on % 56 Data  
account settings.  
To enter Internet profile settings manually  
1
} Internet services } YES } Options } YES  
} Internet profiles } YES.  
2
} Add profile? to add a new profile or select an existing  
profile that you want to edit } YES.  
To enter information in a new profile  
When selecting Add profile? enter a name for the profile }  
YES } Connect using: } YES, select the data account to be used  
} YES and enter the IP address } YES. A list appears. Scroll to  
Save? } YES.  
To edit an existing profile  
When selecting an existing profile, you can do the following:  
Rename – Change the name of the profile.  
59  
This is the Internet version of the user's guide. © Print only for private use.  
 
Connect using – Select data account.  
IP address WAP gateway server address.  
Advanced – More profile settings, see below.  
Delete – Remove the profile.  
To use advanced profile settings  
If you select Advanced you can do the following:  
Chg homepage – Enter the address of the site you want as  
the homepage.  
Second account – Select an alternative data account, if the  
first in Connect using fails.  
Username – Enter your username for the WAP gateway.  
Password – Enter your password for the WAP gateway.  
Security – See Internet security settings.  
Show pictures – View pictures while browsing.  
Internet security  
Your phone has support for secure browsing. Security for a  
connection between a WAP gateway and an Internet service  
provider is the responsibility of the service provider.  
To turn on a secure connection  
1
} Internet services } YES } Options } YES  
} Internet profiles } YES.  
2
3
4
Select the profile to be used } YES.  
} Advanced } YES } Security } YES.  
} On } YES.  
Trusted certificates  
To establish a secure connection when using certain Internet  
services, for example banking or shopping, you need certificates  
in your phone.  
60  
This is the Internet version of the user's guide. © Print only for private use.  
 
To check the certificates in your phone  
} Internet services } YES } Options } YES } Advanced } YES  
} Security } YES } Trusted certif. } YES.  
Using the Internet browser  
Settings may already be entered when you buy the phone.  
Otherwise you can receive the settings from your network  
operator or your service provider in a text message. You can  
also use the Phone setup on www.sonyericsson.com/cn to get  
the settings you need.  
Internet access  
There are two ways to access the Internet:  
Direct access via the options key  
Access via the menu system  
To access the Internet directly  
Press and select Sony Ericsson.  
To access the Internet via the menus  
} Internet services } YES. Select one of the following:  
Open your homepage, for example, Sony Ericsson.  
Go to one of your bookmarks. Select Bookmarks } YES.  
Enter the address of an Internet site. Select Enter address  
} YES. New address? to enter a new address or select one  
of the 10 latest entered addresses. When you enter an  
To stop browsing  
Press and hold NO or  
Press } Exit browser.  
61  
This is the Internet version of the user's guide. © Print only for private use.  
 
Options when browsing  
When you have started browsing, you can reach different  
browsing options by pressing  
.
The options menu is dynamic. Its content may vary  
depending on which site you are visiting.  
The options menu contains the following:  
Go to the homepage set for the current Internet profile. If  
you select an email address when browsing an Internet  
site, you can reply with a text message.  
Bookmarks – Add the site you are currently browsing to  
your list of bookmarks, or see the list of bookmarks for the  
current profile.  
Push inbox – Displays received push messages.  
Enter address – Enter the Internet address of a site you  
want to visit.  
Save picture – Save a picture from the site.  
Send as text msg – Send a text message with a link to the  
current Web page to another phone.  
Reload – Refresh the contents of the Web page.  
Exit browser – Disconnect and go to standby.  
Status – Display current status information, for example,  
profile, access type, connection time, data rate, security,  
address.  
Set as homepg – Set the current site as the homepage of  
the Internet profile you are using.  
Using bookmarks  
You use bookmarks in your mobile phone just as you do with  
a PC Internet browser. You can have up to 25 bookmarks.  
To work with bookmarks  
1
2
} Internet services } YES } Bookmarks } YES.  
Select the bookmark you want to work with }  
.
62  
This is the Internet version of the user's guide. © Print only for private use.  
 
3
} Go to, Edit, Delete, Send as text msg, or Set as homepg  
} YES.  
Downloading  
You can download, for example, pictures and ringtones from  
Web sites directly to your phone.  
Make sure the file sizes do not exceed the free memory in  
your phone, % 71 Memory status for more information.  
1
} Internet services } YES } Bookmarks } YES  
} Sony Ericsson } YES.  
2
Select what you want to download and follow the  
instructions that appear } YES.  
63  
This is the Internet version of the user's guide. © Print only for private use.  
 
Stored information  
The following information can be saved in your phone:  
Cache – improves memory efficiency.  
Passwords – improves server access efficiency.  
Cookies – improves site access efficiency.  
It is advisable to clear any sensitive information about  
previously visited Internet services.  
To allow Internet information in your phone  
1
} Internet services } YES } Options } YES } Advanced  
} YES.  
2
Select the information to allow } YES.  
To clear cache, password list, cookies or  
push inbox  
1
} Internet services } YES } Options } YES } Advanced  
} YES.  
2
Select the information to be cleared } YES to confirm.  
64  
This is the Internet version of the user's guide. © Print only for private use.  
More features  
Alarm clock  
The alarm clock rings even if the phone is set to silent or  
turned off.  
To set an alarm  
1
2
} Alarms } YES } Alarm or Recurrent alarm } YES.  
Enter the time } YES and day, if the alarm is recurrent, by  
scrolling and pressing  
} YES.  
To turn the alarm off  
Press any key to turn the alarm signal off when it rings. If you  
do not want the alarm to be repeated } YES.  
To change the alarm time  
} Alarms } YES } Alarm } YES } New time } YES.  
To cancel the alarm  
} Alarms } YES. Select Alarm or Recurrent alarm } YES }  
Cancel } YES.  
To select an alarm signal  
} Settings } YES } Sounds & alerts } YES } Alarm signal  
} YES.  
Stopwatch  
The stopwatch is turned off when you answer an incoming  
call or when you exit the stopwatch menu.  
To use the stopwatch  
} Organizer } YES } Stopwatch } YES then press:  
to reset.  
65  
This is the Internet version of the user's guide. © Print only for private use.  
     
to save up to nine lap times.  
YES to start, stop or re-start.  
NO to stop.  
Use the navigation key to check saved lap times.  
Calculator  
The phone has a built-in calculator, which can add, subtract,  
divide and multiply.  
To use the calculator  
1
2
} Organizer } YES } Calculator } YES.  
Enter digits with the keypad, then press:  
or  
to get ÷, x, -, +, a decimal point or %.  
to delete the figure.  
YES to calculate a result, equal to (=).  
to save to memory.  
to retrieve from memory.  
Please note that the accuracy of the calculator is  
limited.  
Timer  
The phone has a timer that can be set to count down from  
99 hours, 59 minutes, 59 seconds. When the signal rings,  
press any key to turn it off.  
To set the timer  
} Organizer } YES } Timer } YES.  
66  
This is the Internet version of the user's guide. © Print only for private use.  
 
Calendar  
A lunar calendar appears under Organizer/Calendar  
if you have set Chinese to be the menu language of  
your phone.  
Tasks  
You can keep track of tasks that you need to do. The tasks  
can be edited or deleted.  
To add a task  
1
2
3
4
5
6
} Organizer } YES } Tasks } YES.  
} Add task? } YES.  
Enter a description } YES.  
Set a reminder, if required, or } NO to save.  
Enter the start date and time } YES.  
} Continue? } YES.  
To set the reminder  
Select any of the predefined values or enter the alarm date }  
YES and the alarm time } YES.  
To view a task  
1
2
} Organizer } YES } Tasks } YES.  
Select View all tasks } YES.  
To delete a task  
Scroll to the task that you want to delete, press  
.
To delete all tasks  
} Organizer } YES } Tasks } YES } Delete all } YES.  
67  
This is the Internet version of the user's guide. © Print only for private use.  
 
To edit a task  
1
2
3
When the task is displayed } YES } YES.  
} Edit } YES.  
Edit the task } YES, edit the reminder } YES, edit the time  
and date } Continue.  
Games  
Your phone has several entertaining games. Information and  
game controls is given in help texts for each game.  
To start a game  
1
2
3
} Fun & Games } YES } Games } YES.  
Select a game } YES.  
Select New game or Resume game } YES.  
68  
This is the Internet version of the user's guide. © Print only for private use.  
 
Security  
Keypad lock  
To lock the keypad  
From standby, press  
and select Lock keypad.  
To unlock the keypad  
Press and then press  
.
SIM card lock  
The SIM card lock protects your subscription, but not your  
phone itself, from unauthorized use. If you change SIM  
cards, the phone still works with the new SIM card.  
PIN and PUK code  
Most SIM cards are locked at the time of purchase. If the SIM  
card lock is on, you have to enter a “PIN” (Personal  
Identification Number) every time you turn on your phone.  
If you enter your PIN incorrectly three times in a row, the  
SIM card is blocked. This is indicated by the message  
PIN blocked. To unblock it you need to enter your “PUK”  
(Personal Unblocking Key). Your PIN and PUK are supplied  
by your operator.  
To unblock your SIM card  
1
2
3
4
PIN blocked appears.  
Enter your PUK } YES.  
Enter a new four- to eight-digit PIN } YES.  
Re-enter the new PIN to confirm } YES.  
69  
This is the Internet version of the user's guide. © Print only for private use.  
         
To edit your PIN  
} Settings } YES } Locks } YES } SIM lock } YES  
} Change PIN } YES. If the message Codes do not match  
appears, you entered the new PIN incorrectly. If the message  
Wrong PIN appears, followed by Old PIN:, you entered your  
old PIN incorrectly.  
PIN2  
Certain services are protected by a second PIN.  
To edit your PIN2  
} Settings } YES } Locks } YES } SIM lock } YES  
} Change PIN2 } YES.  
To turn the SIM card lock on or off  
1
} Settings } YES } Locks } YES } SIM lock } YES  
} Protection } YES.  
2
3
} On or Off } YES.  
Enter your PIN } YES.  
Phone lock  
The phone lock protects the phone against unauthorized use if  
it is stolen and the SIM card is exchanged. It is not on when  
you buy the phone. You can change the phone lock code  
(0000) to any four- to eight-digit personal code. The phone  
lock can be set to on, automatic or off.  
The phone lock code must be entered to use  
Master reset. % 53 Master reset for more information.  
70  
This is the Internet version of the user's guide. © Print only for private use.  
       
Phone lock on  
If the phone lock is on, the message Phone locked appears  
each time you turn on the phone. You have to enter your code  
followed by YES to use your phone.  
Automatic  
If the phone lock is set to automatic, you do not need to enter  
your phone lock code until a different SIM card is inserted in  
the phone.  
To set the phone lock  
1
} Settings } YES } Locks } YES } Phone lock } YES  
} Protection } YES.  
2
3
Select an alternative } YES.  
Enter the phone lock code } YES.  
Editing the phone lock code  
It is important that you remember your new code. If you  
should forget it, you have to hand in your phone to your local  
Sony Ericsson retailer.  
To edit your phone lock code  
} Settings } YES } Locks } YES } Phone lock } YES  
} Change code } YES.  
Memory status  
Check for example, how many positions are left in your  
phonebook or how much memory is used.  
To check the memory of the phonebook  
} Phonebook } YES } Memory status } YES.  
71  
This is the Internet version of the user's guide. © Print only for private use.  
   
To check the memory for pictures and  
sounds  
1
2
} Fun & Games } YES, select one of the menus } YES.  
Press  
} Memory status } YES.  
To check memory for text messages  
} Messaging } YES } Text message } YES } Options } YES }  
Memory status } YES.  
To delete saved files or information  
Select a file or information, press  
} YES.  
Please note that some factory default files and  
information cannot be deleted.  
72  
This is the Internet version of the user's guide. © Print only for private use.  
Troubleshooting  
This chapter lists some problems that you might encounter  
while using your phone. Some problems require that you call  
your service provider, but most of the problems you can easily  
correct yourself.  
Recharge or replace the battery  
% 6 To insert the SIM card and battery.  
No indication of charging  
When you start charging a battery that is empty or a battery  
that has not been used for a long time, it may take up to  
30 minutes before the battery icon appears on the screen.  
Menu language  
If the display shows a language that you do not understand,  
you can always set the following from standby:  
Press  
Press  
Press  
0000  
0008  
8888  
for English menus.  
for Chinese menus.  
for automatic, local menus.  
Grey menu options  
Grey text indicates a function that is temporarily unavailable,  
for example, due to your subscription or due to a certain  
setting which has not been turned on.  
Since you cannot send pictures and sounds that are  
copyright-protected, the Send menu is sometimes  
unavailable.  
73  
This is the Internet version of the user's guide. © Print only for private use.  
 
Error messages  
Insert SIM  
There is no SIM card in the phone, it may need cleaning or  
you may have inserted it incorrectly, % 6 To insert the SIM  
card and battery.  
Insert correct SIM card  
The phone is set to work only with certain SIM cards. Insert  
the correct SIM card.  
Inactive SIM  
The SIM card is not activated. Contact your network operator  
for more information.  
You are within range of a network, but you are not allowed to  
use it. However, in an emergency, some operators allow you  
to call, for example, the international emergency number 112,  
% 22 Emergency calls  
No network  
There is no network within range or the received signal is too  
weak. You have to move to get a signal that is strong enough.  
Wrong PIN/Wrong PIN2  
You have entered your PIN or PIN2 incorrectly. Enter the  
correct PIN or PIN2, and press YES, % 69 SIM card lock .  
Codes do not match  
When you want to change a security code (for example your  
PIN) you have to confirm the new code by entering it again.  
The two codes that you have entered do not match % 69 SIM  
card lock.  
74  
This is the Internet version of the user's guide. © Print only for private use.  
 
PIN blocked/PIN2 blocked  
You have entered your PIN or PIN2 incorrectly three times in  
a row. To unblock, % 69 SIM card lock.  
PUK blocked contact operator  
You entered your personal unblocking key code (PUK)  
incorrectly 10 times in a row. Contact your network operator  
or service provider.  
Phone locked  
The phone is locked. To unlock the phone, % 70 Phone lock.  
Phone lock code  
Your phone comes with the phone lock code, 0000. You can  
change it to any four- to eight-digit code, % 70 Phone lock.  
Number not permitted  
The fixed dialling function is on and the number you have  
dialled is not on your fixed numbers list, % 35 Fixed dialling.  
75  
This is the Internet version of the user's guide. © Print only for private use.  
Additional information  
Sony Ericsson Consumer Web site  
and tips are only a few clicks away. Here you find the latest  
efficiently.  
Guidelines for Safe and Efficient Use  
Please read this information before using your mobile  
phone.  
These instructions are intended for your safety. Please  
follow these guidelines. If the product has been subject  
to any of the conditions listed bellow or you have any  
doubt of the proper function make sure to have the  
product checked by certified service partner before charging or using  
it. Failure to do so might lead to risk for product malfunction or even a  
potential hazard to your health.  
Recommendations for safe use of product  
(mobile phone, battery, charger and other  
accessories)  
Always treat your product with care and keep it in a clean and  
dust-free place.  
Warning! May explode if disposed of in fire.  
Do not expose your product to liquid or moisture or humidity.  
Do not expose your product to extreme high or low  
temperatures. Do not expose the battery to  
temperatures above +60°C (+140°F).  
Do not expose your product to open flames or lit  
tobacco products.  
Do not drop, throw or try to bend your product.  
Do not paint your product.  
Do not attempt to disassemble or modify your  
product. Only Sony Ericsson authorised personnel  
should perform service.  
76  
This is the Internet version of the user's guide. © Print only for private use.  
 
Do not close your product with an object inserted between keypad  
and display; this may damage your product. <only for products  
with a clamshell design>  
Do not use your product near medical equipment or in hospitals  
without requesting permission.  
Do not use your product when in, or around aircraft, or areas  
posted “turn off two-way radio”.  
Do not use your product in an area where a potentially explosive  
atmosphere exists, for example, at a gas station, oil depot or  
chemical plant.  
Do not place your product or install wireless  
equipment in the area above your car’s air bag.  
CHILDREN  
KEEP OUT OF CHILDRENS REACH. DO NOT ALLOW  
CHILDREN TO PLAY WITH YOUR MOBILE PHONE  
OR ITS ACCESSORIES. THEY COULD HURT  
THEMSELVES OR OTHERS, OR COULD  
ACCIDENTALLY DAMAGE THE MOBILE PHONE OR  
ACCESSORY. YOUR MOBILE PHONE OR ITS  
ACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BE  
DETACHED AND CREATE A CHOKING HAZARD.  
Power supply (Charger)  
Connect the AC power adapter only to designated power sources as  
marked on the product. Make sure the cord is positioned so that it will  
not be subjected to damage or stress. To reduce risk of electric  
shock, unplug the unit from any power source before attempting to  
clean it. The AC power adapter must not be used outdoors or in damp  
areas. Never alter the cord or plug. If the plug will not fit into the outlet,  
have a proper outlet installed by a qualified electrician.  
Use only Sony Ericsson branded original chargers intended for use  
with your mobile phone. Other chargers may not be designed to the  
same safety and performance standards.  
77  
This is the Internet version of the user's guide. © Print only for private use.  
Battery  
We recommend that you fully charge the battery before you use your  
mobile phone for the first time. A new battery or one that has not been  
used for a long time could have reduced capacity the first few times it  
is used. The battery should only be charged in temperatures between  
+5°C (+41°F) and +45°C (+113°F).  
Use only Sony Ericsson branded original batteries intended for use  
with your mobile phone. Using other batteries and chargers could be  
dangerous.  
The talk and standby times depend on several different conditions  
such as signal strength, operating temperature, application usage  
patterns, features selected and voice or data transmissions when  
using the mobile phone. Under normal conditions the stand-by time  
for this battery is up to 280 hours.  
Turn off your mobile phone before removing the battery. Do not allow  
the battery to be put into the mouth. Battery electrolytes may be toxic  
if swallowed. Do not let the metal contacts on the battery touch  
another metal object. This could short-circuit and damage the battery.  
Use the battery for the intended purpose only.  
Personal medical devices  
Mobile phones may affect the operation of cardiac pacemakers and  
other implanted equipment. Please avoid placing the mobile phone  
over the pacemaker, e.g. in your breast pocket. When using the  
mobile phone, place it at the ear opposite the pacemaker. If a  
minimum distance of 15 cm (6 inches) is kept between the mobile  
phone and the pacemaker, the risk of interference is limited. If you  
have any reason to suspect that interference is taking place,  
immediately turn off your mobile phone. Contact your cardiologist for  
more information.  
For other medical devices, please consult your physician and the  
manufacturer of the device.  
Driving  
Please check if local laws and regulations restrict the use of mobile  
phones while driving or require drivers to use handsfree solutions. We  
78  
This is the Internet version of the user's guide. © Print only for private use.  
recommend that you use only Sony Ericsson handsfree solutions  
intended for use with your product.  
Please note that because of possible interference to electronic  
equipment, some vehicle manufacturers forbid the use of mobile  
phones in their vehicles unless a handsfree kit with an external  
antenna supports the installation.  
Always give full attention to driving and pull off the road and park  
before making or answering a call if driving conditions so require.  
Emergency calls  
Mobile phones operate using radio signals, which cannot guarantee  
connection under all conditions. Therefore you should never rely  
solely upon any mobile phone for essential communications (e.g.  
medical emergencies).  
Emergency calls may not be possible in all areas, on all cellular  
networks, or when certain network services and/or mobile phone  
features are in use. Check with your local service provider.  
Antenna  
This phone contains a built in antenna. Use of antenna devices not  
marketed by Sony Ericsson specifically for this model could damage  
your mobile phone, reduce performance, and produce SAR levels  
above the established limits (see below).  
Efficient use  
Hold your mobile phone as you would any other phone. Do not cover  
the top of the phone when in use, as this affects call quality and may  
cause the phone to operate at a higher power level than needed, thus  
shortening talk and standby times.  
Radio frequency (RF) exposure and SAR  
Your mobile phone is a low-power radio transmitter and receiver.  
When it is turned on, it emits low levels of radio frequency energy  
(also known as radio waves or radio frequency fields).  
Governments around the world have adopted comprehensive  
international safety guidelines, developed by scientific organizations,  
79  
This is the Internet version of the user's guide. © Print only for private use.  
e.g. ICNIRP (International Commission on Non-Ionizing Radiation  
Protection) and IEEE (The Institute of Electrical and Electronics  
Engineers Inc.), through periodic and thorough evaluation of scientific  
studies. These guidelines establish permitted levels of radio wave  
exposure for the general population. The levels include a safety  
margin designed to assure the safety of all persons, regardless of age  
and health, and to account for any variations in measurements.  
Specific Absorption Rate (SAR) is the unit of measurement for the  
amount of radio frequency energy absorbed by the body when using a  
mobile phone. The SAR value is determined at the highest certified  
power level in laboratory conditions, but the actual SAR level of the  
mobile phone while operating can be well below this value. This is  
because the mobile phone is designed to use the minimum power  
required to reach the network.  
Variations in SAR below the radio frequency exposure guidelines do  
not mean that there are variations in safety. While there may be  
differences in SAR levels among mobile phones, all Sony Ericsson  
mobile phone models are designed to meet radio frequency exposure  
guidelines.  
A separate leaflet with SAR information for this mobile phone model is  
included with the material that comes with this mobile phone. This  
information can also be found, together with more information on  
Disposal of old electrical &  
electronic equipment  
This symbol on the product or on its packaging indicates  
that this product shall not be treated as household  
waste. Instead it shall be handed over to the applicable  
collection point for the recycling of electrical and  
electronic equipment. By ensuring this product is disposed of  
correctly, you will help prevent potential negative consequences for  
the environment and human health, which could otherwise be caused  
by inappropriate waste handling of this product. The recycling of  
materials will help to conserve natural resources. For more detailed  
information about recycling of this product, please contact your local  
80  
This is the Internet version of the user's guide. © Print only for private use.  
city office, your household waste disposal service or the shop where  
you purchased the product.  
Disposing of the battery  
Please check local regulations for disposal of batteries  
or call your local Sony Ericsson Call Center for  
information.  
The battery should never be placed in municipal waste.  
Use a battery disposal facility if available.  
End User Licence Agreement  
This wireless device, including without limitation any media delivered  
with the device, (“Device”) contains software owned by Sony Ericsson  
Mobile Communications AB and its affiliated companies (“Sony  
Ericsson”) and its third party suppliers and licensors (“Software”).  
As user of this Device, Sony Ericsson grants you a non-exclusive,  
non-transferable, non-assignable license to use the Software solely in  
conjunction with the Device on which it is installed and/or delivered  
with. Nothing herein shall be construed as a sale of the Software to a  
user of this Device.  
You shall not reproduce, modify, distribute, reverse engineer,  
decompile, otherwise alter or use any other means to discover the  
source code of the Software or any component of the Software. For  
avoidance of doubt, you are at all times entitled to transfer all rights  
and obligations to the Software to a third party, solely together with  
the Device with which you received the Software, provided always  
that such third party agrees in writing to be bound by these rules.  
You are granted this license for a term of the useful life of this Device.  
You can terminate this license by transferring all your rights to the  
Device on which you have received the Software to a third party in  
writing. If you fail to comply with any of the terms and conditions set  
out in this license, it will terminate with immediate effect.  
Sony Ericsson and its third party suppliers and licensors are the sole  
and exclusive owner of and retain all rights, title and interest in and to  
the Software. Sony Ericsson, and, to the extent that the Software  
81  
This is the Internet version of the user's guide. © Print only for private use.  
contains material or code of a third party, such third party, shall be  
entitled third party beneficiaries of these terms.  
The validity, construction and performance of this license shall be  
governed by the laws of Sweden. The foregoing shall apply to the full  
extent permitted by, when applicable, statutory consumer rights.  
Limited Warranty  
Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden,  
(Sony Ericsson), provides this Limited Warranty for your mobile  
phone and original accessory delivered with your mobile phone  
(hereinafter referred to as “Product”).  
Should your Product need warranty service, please return it to the  
dealer from whom it was purchased, or contact your local Sony  
Ericsson Call Center (national rates may apply) or visit  
What we will do  
If, during the warranty period, this Product fails to operate under  
normal use and service, due to defects in design, materials or  
workmanship, Sony Ericsson authorised distributors or service  
partners, in the country/region where you purchased the Product, will,  
at their option, either repair or replace the Product in accordance with  
the terms and conditions stipulated herein.  
Sony Ericsson and its service partners reserve the right to charge a  
handling fee if a returned Product is found not to be under warranty  
according to the conditions below.  
Please note that some of your personal settings, downloads or other  
information may be lost when your Sony Ericsson Product is repaired  
or replaced. At present Sony Ericsson may be prevented by  
applicable law, other regulation or technical restrictions from making a  
backup copy of certain downloads. Sony Ericsson does not take any  
responsibility for any lost information of any kind and will not  
reimburse you for any such loss. You should always make backup  
copies of all the information stored on your Sony Ericsson Product  
such as downloads, calendar and contacts before handing in your  
Sony Ericsson Product for repair or replacement.  
82  
This is the Internet version of the user's guide. © Print only for private use.  
Conditions  
1
The warranty is valid only if the original proof of purchase issued to  
the original purchaser by a Sony Ericsson authorised dealer,  
specifying the date of purchase and serial number**, for this  
Product, is presented with the Product to be repaired or replaced.  
Sony Ericsson reserves the right to refuse warranty service if this  
information has been removed or changed after the original  
purchase of the Product from the dealer.  
2
3
If Sony Ericsson repairs or replaces the Product, the repaired or  
replaced Product shall be warranted for the remaining time of the  
original warranty period or for thirty (30) days from the date of  
repair, whichever is longer. Repair or replacement may involve the  
use of functionally equivalent reconditioned units. Replaced parts  
or components will become the property of Sony Ericsson.  
This warranty does not cover any failure of the Product due to  
normal wear and tear, or due to misuse, including but not limited to  
use in other than the normal and customary manner, in  
accordance with the Sony Ericsson instructions for use and  
maintenance of the Product. Nor does this warranty cover any  
failure of the Product due to accident, software or hardware  
modification or adjustment, acts of God or damage resulting from  
liquid. A rechargeable battery can be charged and discharged  
hundreds of times. However, it will eventually wear out – this is  
not a defect. When the talk-time or standby time is noticeably  
shorter, it is time to replace your battery. Sony Ericsson  
recommends that you use only batteries and chargers approved  
by Sony Ericsson. Minor variations in display brightness and color  
may occur between phones. There may be tiny bright or dark dots  
on the display. These are called defective pixels and occur when  
individual dots have malfunctioned and can not be adjusted. Two  
defective pixels are deemed acceptable. Minor variations in  
camera image appearance may occur between phones. This is  
nothing uncommon and is not regarded as a defective camera  
module.  
4
Since the cellular system on which the Product is to operate is  
provided by a carrier independent from Sony Ericsson, Sony  
83  
This is the Internet version of the user's guide. © Print only for private use.  
Ericsson will not be responsible for the operation, availability,  
coverage, services or range of that system.  
5
6
This warranty does not cover Product failures caused by  
installations, modifications, or repair or opening of the Product  
performed by a non-Sony Ericsson authorised person.  
The warranty does not cover Product failures which have been  
caused by use of accessories or other peripheral devices which  
are not Sony Ericsson branded original accessories intended for  
use with the Product.  
7
8
Tampering with any of the seals on the Product will void the  
warranty.  
THERE ARE NO EXPRESS WARRANTIES, WHETHER  
WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED  
WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING  
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON  
OR ITS LICENSORS BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE  
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST  
PROFITS OR COMMERCIAL LOSS; TO THE FULL EXTENT  
THOSE DAMAGES CAN BE DISCLAIMED BY LAW.  
Some countries/regions/states do not allow the exclusion or limitation  
of incidental or consequential damages, or limitation of the duration of  
implied warranties, so the preceding limitations or exclusions may not  
apply to you.  
The warranty provided does not affect the consumer's statutory rights  
under applicable legislation in force, nor the consumer's rights against  
the dealer arising from their sales/purchase contract.  
* In some countries/regions additional information is requested. If so,  
this is clearly shown on the valid proof of purchase.  
FCC Statement  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and  
84  
This is the Internet version of the user's guide. © Print only for private use.  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
85  
This is the Internet version of the user's guide. © Print only for private use.  
Declaration of Conformity  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
S-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAA-1002012-BV  
and in combination with our accessories, to which this declaration  
relates is in conformity with the appropriate standards 3GPP TS  
51.010-1, EN 301489-7, EN 60950, following the provisions of Radio  
Equipment and Telecommunication Terminal Equipment directive  
99/5/EC with requirements covering EMC directive 89/336/EEC, and  
Low Voltage directive 73/23/EEC.  
Lund, November 2005  
Shoji Nemoto, Head of Product Business Unit GSM/UMTS  
We fulfil the requirements of the R&TTE Directive (99/5/EC).  
86  
This is the Internet version of the user's guide. © Print only for private use.  
   
divert 31  
A
alarm clock 65  
ask to save 25  
assembling, phone 6  
automatic redialling 22  
B
restrict 34  
battery  
charging 7  
inserting 7  
C
calculator 66  
calendar 67  
conference calls 33  
contrast (display) 52  
call costs 29  
credit limit 30  
call time 29  
calling  
display  
contrast 52  
light 51  
from call list 23  
diverting calls 31  
downloading 63  
87  
This is the Internet version of the user's guide. © Print only for private use.  
 
E
L
emergency calls 22  
language  
error messages 74  
F
fixed dialling 35  
phone 70  
SIM card 69  
G
GPRS 57  
groups  
groups. see phonebook 28  
GSM 58  
master reset 53  
menus 9, 10  
minute minder 51  
my numbers 52  
GSM frequencies 2  
O
own number 52  
H
handsfree 52  
personal ringtones 23  
I
phone language 12  
phone lock 70  
Internet 55  
options 62  
security 60  
setting up 55  
K
key sound 51  
88  
This is the Internet version of the user's guide. © Print only for private use.  
phonebook 23  
redialling 22  
ringtones 49  
shortcuts 24  
sort order 25  
pictures 47  
send a message 38  
memory status 71  
PIN  
change 70  
PIN2 70  
Pinyin input 19  
profiles 53  
PUK 69  
lock 69  
stopwatch 65  
Stroke input 16  
Style-Up cover 46  
89  
This is the Internet version of the user's guide. © Print only for private use.  
T
text messages 38  
delete 42  
insert item 38  
save 42  
send 38  
themes 47  
time settings 52  
U
unblocking  
PIN 8  
V
vibrating alert 51  
voice mail 28  
90  
This is the Internet version of the user's guide. © Print only for private use.  
An English version of this user guide can be found on  
For the latest version of this user guide, please go to  
Sony Ericsson Mobile Communications AB  
SE-221 88 Lund, Sweden  
EN/LZT 108 8129 R1A  
Printed in China  
This is the Internet version of the user's guide. © Print only for private use.  

Uniden XS 910 User Manual
Toshiba MK3006GAL User Manual
Sony Ericsson CDX CA860X User Manual
Sony CD Player D 151 User Manual
Sanyo VM4500 User Manual
Samsung SMT W6100 User Manual
Samsung CURVE 9330 User Manual
Nokia NSERIES N810 User Manual
Nokia N2610 User Manual
Nokia IP30 User Manual