Sony Ericsson J120c User Manual

J110c/J120c  
Sony Ericsson  
GSM 900/1800, 850/1900  
This User guide is published by Sony Ericsson Mobile  
Communications AB or its local affiliated company, without any  
warranty. Improvements and changes to this User guide  
necessitated by typographical errors, inaccuracies of current  
information, or improvements to programs and/or equipment, may  
be made by Sony Ericsson Mobile Communications AB or its local  
affiliated company at any time and without notice. Such changes  
will, however, be incorporated into new editions of this User guide.  
All rights reserved.  
© Sony Ericsson Mobile Communications AB, 2007  
Publication number: EN/LZT 108 9323 R2A.  
Please note:  
Some of the services in this User guide are not supported by all  
networks. This also applies to the GSM International Emergency  
Number 112.  
Please contact your network operator or service provider if you are  
in doubt whether you can use a particular service or not.  
Please read the Guidelines for safe and efficient use and the Limited  
warranty chapters before you use your phone.  
The Predictive Text Technology is used under license from Zi  
Corporation.  
Sony is a trademark of Sony Corporation. Ericsson is a trademark  
of Telefonaktiebolaget LM Ericsson. The marbelized logo is  
a trademark or registered trademark of Sony Ericsson Mobile  
Communications AB.  
Other product and company names may be the trademarks of their  
respective owners.  
Any rights not expressly granted herein are reserved.  
Note: Sony Ericsson advised users to backup their personal data  
information.  
All illustrations are for illustration only and may not accurately  
depict the actual phone.  
2
This is the Internet version of the user's guide. © Print only for private use.  
 
Instruction symbols  
Standard icons that appear in the User guide are:  
}
Use the navigation key to scroll and select.  
Press the navigation key up.  
Press the navigation key down.  
Press the navigation key to the left.  
Press the navigation key to the right.  
See also page ...  
%
Note  
Indicates that a service or function is network- or  
subscription-dependent. Because of this, all menus  
may not be available in your phone. Consult your  
network operator for more information.  
For more information, go to www.sonyericsson.com/cn.  
3
This is the Internet version of the user's guide. © Print only for private use.  
Getting started  
Assembly  
You have to insert a SIM card and the battery.  
To insert SIM card and battery  
1 Remove the battery cover.  
2 Slide the SIM card into its holder with the contacts  
facing down.  
3 Insert the battery with the label side up and the  
connectors facing each other.  
4 Replace the battery cover as shown in the picture.  
4
This is the Internet version of the user's guide. © Print only for private use.  
     
Turning on the phone  
To turn the phone on  
1 Press and hold down  
.
2 Enter your PIN if requested. To correct mistakes,  
select Clear.  
3 Select OK.  
4 Select a language.  
5 Enter the time and date and select OK.  
If the screen turns dark when you enter your PIN,  
press the left  
key to turn the screen light on.  
Standby  
After you have turned the phone on and entered your PIN,  
the name of the network operator appears on the screen.  
This is called standby.  
5
This is the Internet version of the user's guide. © Print only for private use.  
     
To make a call  
1 From standby enter the area code and phone number.  
2 Press  
.
To end a call  
Press  
.
To answer a call  
Press  
.
SIM card  
The SIM (Subscriber Identity Module) card, which you get  
from your network operator, contains information about  
your subscription. Always turn off your phone and detach  
the charger before you insert or remove the SIM card.  
You can save contacts on the SIM card before  
removing it from your phone. Contacts may be  
saved in the phone memory % 33 To copy a contact  
6
This is the Internet version of the user's guide. © Print only for private use.  
 
PIN  
You may need a PIN (Personal Identification Number) to  
activate the services in your phone. Your PIN is supplied  
by your network operator. Each PIN digit appears as *,  
unless it starts with emergency number digits, for  
example, 112 or 911. You can call an emergency number  
without entering a PIN.  
If you enter the wrong PIN three times in a row,  
PIN blocked. Enter PUK provided by your operator  
appears. To unblock it, you need to enter your PUK  
(Personal Unblocking Key) % 45 SIM card lock.  
Phone model  
You can check your phone model in the Settings menu.  
To check the phone model  
From standby select Menu } Settings } Phone status.  
Tips and information in the phone  
Tips and information about a variety of functions are  
available in your phone. For example, in the Calls menu,  
you can select Call tips to view information about making  
calls.  
7
This is the Internet version of the user's guide. © Print only for private use.  
     
Charging the battery  
The phone battery is partly charged when you buy it.  
To charge the battery  
1 Connect the charger to the phone. It takes  
approximately 2.5 hours to fully charge the battery.  
Press a key to view the screen.  
2 To remove the charger, tilt the plug upwards.  
You can use the phone while it is charging. You can  
charge the battery at any time and for more or less  
2.5 hours. You can interrupt the charging without  
damaging the battery.  
8
This is the Internet version of the user's guide. © Print only for private use.  
   
Phone overview  
1
2
7
8
3
4
9
10  
11  
5
6
1
Strength of  
network signal  
6
7
Stereo headset and battery  
charger connector  
2, 8 Selection key  
options  
Battery status  
3, 9 Selection keys  
10 Navigation key with  
shortcuts  
4
5
Call key  
Keylock  
11 End and on/off key  
9
This is the Internet version of the user's guide. © Print only for private use.  
 
Phone menu  
The menu name and an icon are shown.  
To navigate the menus  
1 From standby select Menu.  
2 Press  
or  
and select a menu.  
3 To scroll through a sub menu, press  
or  
.
To go back one step in the menu  
Select Back.  
To select text on the screen  
Press  
.
To return to standby  
Press  
.
10  
This is the Internet version of the user's guide. © Print only for private use.  
 
Shortcuts  
J110c  
From standby you can use the navigation keys to go  
directly to a function:  
Press  
Press  
Press  
to set the ringtone volume (J110c only).  
to go to contacts.  
to write a text message.  
Press  
to set the alarm.  
J120c  
From standby you can use the navigation keys to go  
directly to a function:  
Press  
Press  
Press  
to play the radio (J120c only).  
to go to contacts.  
to write a text message.  
Press  
to set the alarm.  
11  
This is the Internet version of the user's guide. © Print only for private use.  
   
To lock the keypad  
Press and select Lock.  
To unlock the keypad  
Press and select Unlock.  
Calls to the international emergency number 112 can  
still be made, even when the keypad is locked.  
To turn the screen light on  
Press  
.
To set the phone to silent  
Press and hold down  
.
Phone language  
12  
This is the Internet version of the user's guide. © Print only for private use.  
         
Entering text  
There are two methods you can use to enter text:  
Multitap  
Predictive text input  
To change text input methods  
1 When you write the message, select Options  
} Dictionary.  
2 Select an option.  
To enter text using multitap  
Press  
Press  
Press  
Press  
letters.  
Press  
until the desired character appears.  
to add a space.  
to enter full stops and commas.  
to shift between capitals and lower case  
to enter symbols, for example, the + sign.  
Press and hold down  
Select Clear to correct mistakes or go back one space.  
to enter numbers.  
Multitap input only applies when latin characters are  
selected as input language.  
Predictive text input  
Predictive text input uses a dictionary to recognize the  
most commonly used words. You press each key only  
once, even if the letter you want is not the first letter on  
the key.  
To enter text using predictive text input  
1 For example, if you want to write the word “Jane”,  
press  
,
,
,
.
13  
This is the Internet version of the user's guide. © Print only for private use.  
   
2 If the word shown is the one you want, press  
to  
accept and add a space. To accept a word without  
adding a space, press  
one you want, press  
. If the word shown is not the  
or repeatedly to view  
alternative words. To accept a word and add a space,  
press  
3 Continue writing your message. To enter full stops and  
commas, press and then or repeatedly.  
.
To add words to the dictionary  
1 When you write the message, select Options  
} My words } New word.  
2 Enter the word using multitap.  
To add items in a text message  
When you write the message, select Options  
} Add item.  
To add symbols in a text message  
When you write the message, select Options  
} Add symbol.  
To correct mistakes  
Select Clear.  
To change writing language  
When you write the message, select Options  
} Writing lang..  
Writing tips  
You can view tips and information about writing text.  
To view writing tips  
When you write the message, select Options  
} Writing tips.  
14  
This is the Internet version of the user's guide. © Print only for private use.  
   
Chinese input  
This mobile phone has different input methods for entering  
Chinese characters:  
Stroke input  
Pinyin input  
You can use these methods, for example, to enter  
Chinese names and Chinese short messages.  
Switching between Chinese input methods  
In the Chinese editing mode, you can select and switch  
quickly to another input method by pressing  
repeatedly.  
General instructions  
Regardless of which input method you choose, your  
phone has a function to speed up the entry of Chinese  
characters. Whenever you enter a stroke or a Pinyin letter,  
a candidate row of the most frequently used characters  
containing that stroke or relating to that letter appears at  
the bottom of the screen.  
If the character you want is not displayed in the candidate  
row, press  
Continue pressing  
to present another candidate row.  
until the character you want is  
displayed. Alternatively, you can enter the next stroke or  
Pinyin letter and a new set of characters will immediately  
be displayed in the candidate row. To go back to the  
previous row, press  
.
Stroke input  
A Chinese character is built up of strokes. There are more  
than 30 basic strokes, which are grouped into 5 stroke  
categories. Each category is represented on the keypad  
by one of the keys  
-
. The Wild Card key  
,
is used when you are not sure of which stroke to use.  
15  
This is the Internet version of the user's guide. © Print only for private use.  
   
Stroke categories  
The 5 stroke categories are defined in the table below:  
Number Stroke  
Basic Stroke  
Character  
Key  
Category Stroke Name  
Over  
Lift  
王 十 在 七 天  
海 红 牡 状 习  
中 业 上 门 丑  
小 水 打 子 承  
直 真 质 草  
Down  
Down-Hook  
Short  
Slope Down  
Long Left Slope  
Over Slope  
Short left Slope  
Dot  
八 九 丹 风 片  
香 千 匕 后 丢  
而 页 面 学 殷  
六 学 雷 心 性  
人 火 又 送 林  
四 西 酉 酸  
Right Slope  
Down-Curved-  
Over  
Down-Over  
山 巨 屯 母 凶  
么 去 公 约 能  
女 要 好 巡 巢  
衣 以 饭 收 长  
我 或 民 成 伐  
Left Slope-Over  
Left Slope-Dot  
Down-Lift  
Right Slope-  
Hook  
Down-Over-  
Hook  
心 必 思 忘  
16  
This is the Internet version of the user's guide. © Print only for private use.  
Number Stroke  
Basic Stroke  
Character  
Key Category Stroke Name  
Down-Over-  
电 也 毛 兄 孔  
专 传 转  
Curved-Hook  
Down-Over-  
Left Slope  
Down-Over-  
Down-Hook  
马 与 张 号 费  
鼎 鼐  
Down-Over-  
Down  
Over-Hook  
Over-Down  
写 字 皮 通 免  
口 已 户 书 骨  
力 习 也 同 永  
Over-Down-  
Hook  
Over-Left Slope  
又 之 登 多 社  
及 极 廷 建  
Over-Down-  
Over-Left Slope  
Over-  
Left Slope-  
Curved-Hook  
阿 队 陈 那 部  
Over-Down-  
Over-Hook  
乃 透 鼐 隽 杨  
Over-Down-  
Over-Down  
Curved-Hook  
狗 豹 家 逐 狂  
乙 九 瓦 飞 风  
Over-Down-  
Curved-Hook  
17  
This is the Internet version of the user's guide. © Print only for private use.  
Number Stroke  
Basic Stroke  
Character  
Key Category Stroke Name  
Over-Down-  
投 沿 船 凹  
话 计 认 讯  
Over  
Over-Down-Lift  
? (Wild card key)  
Components  
The basic building units of Chinese characters are  
components that are made up of strokes. After entering  
the first two strokes of the desired character, the  
component and character candidates that started with  
that stroke are displayed in the candidate row.  
Using components is a fast method for entering complex  
characters.  
The smaller candidates surrounded by  
dotted frames are components, and the  
bigger candidates without dotted frames  
are characters.  
For example, to enter “ ”  
1 Enter “ ”, “ ” and “ ”.  
2 Move the cursor to “ ”, press Select.  
3 Move the cursor to “ ”, press Select again to  
select “ ”.  
18  
This is the Internet version of the user's guide. © Print only for private use.  
Example of using the wild card key  
The wild card key  
, is used to supplement unclear  
strokes in entering characters. If you want to enter “ ”,  
but you only know that “ ” is the first and the last stroke  
of the character and that the total number of strokes is  
four, enter  
,
,
,
. The character is  
displayed in the candidate row.  
Pinyin input  
Press the keys containing the required Pinyin letters, and  
the phone will make various proposals on the screen,  
according to the pronunciation rules of Mandarin.  
Below is the key mapping of Pinyin letters on the keypad.  
Number Key  
Pinyin Letter  
a b c  
d e f  
g h i  
j k l  
m n o  
p q r s  
t u ü  
w x y z  
On the keypad, the letter ü is replaced  
by v.  
19  
This is the Internet version of the user's guide. © Print only for private use.  
 
For example, to enter “ ”  
1 Press  
2 When “xin” is highlighted, press  
,
,
.
or  
and select  
”, then press Select (If you want to enter any of the  
other suggested Pinyin combinations, scroll up or down  
to the desired combination, then press Select).  
3 Press Select again to select “ ”, When ” is  
highlighted.  
Input punctuation, symbols and smilies  
Under any Chinese input mode, press  
, to see the  
table of punctuation marks, symbols and smilies. Use the  
navigation key to make a selection. Press  
a space into the text.  
to enter  
20  
This is the Internet version of the user's guide. © Print only for private use.  
Menu overview J110c  
Text message  
Saved msgs  
Delete msgs  
Messaging tips  
Settings  
Messaging  
Inbox  
Sent messages  
Drafts  
View contacts  
Add contact  
My number  
Voicemail  
Delete contacts  
Speed dial  
Contacts  
Send contacts  
SIM contacts  
Contact tips  
Settings  
Call list  
Call timer  
Calls  
Call tips  
Call settings  
Phone status  
Sound & alerts  
Wallpaper  
Settings  
Time and date  
Language  
Advanced  
Alarm clock  
Reminders  
Timer  
Extras  
Stopwatch  
Calculator  
My sounds  
Games  
Set alarm  
Alarms  
21  
This is the Internet version of the user's guide. © Print only for private use.  
 
Menu overview J120c  
Text message  
Saved msgs  
Delete msgs  
Messaging tips  
Settings  
Messaging  
Inbox  
Sent messages  
Drafts  
View contacts  
Add contact  
My number  
Voicemail  
Delete contacts  
Speed dial  
Contacts  
Send contacts  
SIM contacts  
Contact tips  
Settings  
Call list  
Call timer  
Calls  
Call tips  
Call settings  
Phone status  
Sound & alerts  
Wallpaper  
Settings  
Time and date  
Language  
Advanced  
Alarm clock  
Reminders  
Timer  
Stopwatch  
Calculator  
My sounds  
Games  
Extras  
Radio  
22  
This is the Internet version of the user's guide. © Print only for private use.  
 
Icons  
These icons appear on the screen to show status and new  
events.  
Icon Description  
Strength of the network signal % 49 Networks.  
A charger is attached to your phone % 8 Charging  
You have missed a call % 24 Calling.  
You have received a new text or voice message*  
The phone is set to silent % 12 To set the phone to  
The keypad is locked % 11 Press to set the alarm.  
Divert calls is activated* % 26 Diverting calls.  
The radio has been minimized and is playing in the  
For more information, go to  
*Some services may be operator-, network- and  
subscription-dependent.  
23  
This is the Internet version of the user's guide. © Print only for private use.  
 
Calling  
Making and receiving calls  
You must turn on the phone and be within range of  
a network.  
To make a call  
1 From standby enter the area code and phone number.  
2 Press  
.
To end a call  
Press  
.
To answer a call  
Press  
.
To reject a call  
Press  
.
To view options during a call  
Select Options.  
To mute the microphone during a call  
Select Options } Turn off mic..  
24  
This is the Internet version of the user's guide. © Print only for private use.  
     
To turn the loudspeaker on during a call  
Select Options } Loudspeaker on.  
Do not hold the phone to your ear when using the  
loudspeaker. This could damage your hearing.  
To change the ear speaker volume during a call  
Press or  
.
Do not hold the phone to your ear when using high  
ringtones. This could damage your hearing.  
To make international calls  
1 From standby press  
screen.  
until a + sign appears on the  
2 Enter the country/region code, area code (without the  
first zero) and phone number.  
3 Press  
To view a missed call  
When Missed call is displayed, select View.  
.
Call list  
You can view information about recent calls.  
To call a number from the call list  
1 From standby press  
2 Scroll to the name or number and press  
.
.
To delete a number from the call list  
1 From standby press  
.
2 Scroll to the name or number and select Options  
} Delete } Yes.  
25  
This is the Internet version of the user's guide. © Print only for private use.  
         
Emergency calls  
Your phone supports international emergency numbers,  
for example, 112 and 911. These numbers can normally  
be used to make emergency calls in any country/region,  
with or without the SIM card inserted, if a GSM network is  
within range.  
In some countries/regions, other emergency  
numbers may also be promoted. Your network  
operator may therefore have saved additional local  
emergency numbers on the SIM card.  
To make an emergency call  
From standby enter 112 (the international emergency  
number) and press  
.
To view your local emergency numbers  
From standby select Menu } Calls } Call settings  
} Emergency nos.  
Diverting calls  
You can divert calls, for example, to an answering service.  
When restricted dialling is used, some divert call  
options are not available % 28 Restricted dialling.  
Divert call options  
Standard options are:  
Enter number – enter the phone number you want  
to divert your calls to.  
Div. to contact – select a contact to divert your  
calls to.  
Divert to voicem. – divert your calls to your  
voicemail.  
Get status – select to check if divert calls is  
activated.  
26  
This is the Internet version of the user's guide. © Print only for private use.  
       
To divert calls  
1 From standby select Menu } Calls } Call settings  
} Divert all calls } Activate.  
2 Select an option.  
3 Select Save } OK.  
To cancel a call divert  
From standby select Menu } Calls } Call settings  
} Divert all calls } Deactivate } OK.  
More than one call  
You can handle more than one call at the same time. For  
example, you can put an ongoing call on hold, while you  
make or answer a second call. You can also switch  
between the two calls. You cannot answer a third call  
without ending one of the first two calls.  
Call waiting  
When call waiting is used, you hear a beep if you receive  
a second call.  
To use call waiting  
1 From standby select Menu } Calls } Call settings  
} Call waiting.  
2 Select an option.  
To answer a second call  
During the call, press  
hold.  
. Your ongoing call is put on  
To reject a second call  
During the call, select Busy and continue with the  
ongoing call.  
27  
This is the Internet version of the user's guide. © Print only for private use.  
 
To make a second call  
1 During the call, select Options } Hold call. Your  
ongoing call is put on hold.  
2 Enter the number to call and press  
.
To switch between two calls  
During the call, select Switch.  
To join two calls  
During the call, select Options } Join calls.  
To end both calls  
Press twice.  
Conference calls  
With a conference call, you can have a joint conversation  
with three people.  
To join two calls  
During the call, select Options } Join calls.  
To add a new participant  
1 During the call, select Options } Hold call. Your  
ongoing call is put on hold.  
2 Enter the number to call and press  
.
3 Select Options } Join calls to add the new participant.  
4 Repeat this task to add more participants.  
Restricted dialling  
You can restrict outgoing and incoming calls when at  
home or abroad. You need a password from your service  
provider.  
If you divert incoming calls, you cannot use some  
restricted dialling options.  
28  
This is the Internet version of the user's guide. © Print only for private use.  
     
Restricted dialling options  
Standard options are:  
All outgoing – all calls from your phone.  
Outgoing intl – all international calls from your  
phone.  
Outg. intl roam – all international calls from your  
phone except to your home country/region.  
All incoming – all calls to your phone.  
Inc. in roaming – all calls to your phone when you  
are abroad (when roaming).  
Change passw. – change your password for  
restricting calls.  
To restrict calls  
1 From standby select Menu } Calls } Call settings  
} Restrict calls.  
2 Select an option.  
3 Enter your password and select OK.  
To cancel all call restrictions  
1 From standby select Menu } Calls } Call settings  
} Restrict calls } Deactivate all.  
2 Enter your password and select OK.  
Fixed dialling  
Fixed dialling allows calls to be made only to certain  
numbers saved on the SIM card. The fixed numbers are  
protected by your PIN2.  
When fixed dialling is used, you can still call the  
international emergency number 112.  
29  
This is the Internet version of the user's guide. © Print only for private use.  
Partial numbers can be saved. For example, saving  
0123456 allows calls to be made to all numbers starting  
with 0123456.  
When fixed dialling is used, you may not be allowed  
to view or manage any phone numbers saved on the  
SIM card.  
To use fixed dialling  
1 From standby select Menu } Contacts } Settings  
} Fixed dialling } Fixed no. list.  
2 Enter your PIN2 and select OK.  
To save a fixed number  
1 From standby select Menu } Contacts } Settings  
} Fixed dialling } Fixed no. list.  
2 Enter your PIN2 and select OK.  
3 Enter the information and select OK.  
Call time  
During a call, the duration of the call is shown. You can  
check the duration of your last call, all calls made from  
your phone and the total time.  
To check the call time  
1 From standby select Menu } Calls } Call timer.  
2 Select an option.  
To reset the call timer  
From standby select Menu } Calls } Call timer  
} Total call time } Yes.  
30  
This is the Internet version of the user's guide. © Print only for private use.  
 
Showing or hiding your phone number  
You can show or hide your phone number when you make  
a call.  
To hide your phone number  
1 From standby select Menu } Calls } Call settings  
} Hide/show no..  
2 Select Hide number.  
Call tips  
You can view tips and information about calls.  
To view call tips  
From standby select Menu } Calls } Call tips.  
31  
This is the Internet version of the user's guide. © Print only for private use.  
   
Contacts  
You can save names and numbers in the phone memory  
or on the SIM card. Contacts are automatically saved in  
the phone memory. You can copy contacts from the  
phone memory to the SIM card.  
To add a contact  
1 From standby select Menu } Contacts } Add contact.  
2 Enter the name and select Continue.  
3 Enter the number and select Save.  
You can enter the + sign and country/region code  
with all phonebook numbers. They can then be used  
To call a contact  
1 From standby press  
2 Scroll to, or enter the first few letters of the contact.  
3 Press  
.
.
To edit a contact  
1 From standby select Contact.  
2 Scroll to the contact and select Options } Edit contact.  
3 Edit the information and select Save.  
32  
This is the Internet version of the user's guide. © Print only for private use.  
   
To delete a contact  
1 From standby select Contact.  
2 Scroll to the contact and select Options  
} Delete contact } Yes.  
To copy a contact to the SIM card  
1 From standby select Contact.  
2 Scroll to the contact and select Options } Copy to SIM.  
3 Select an option.  
Speed dialling  
Speed dialling lets you select nine contacts that you can  
dial quickly. The contacts can be saved in positions 1-9.  
To add contacts to speed dial numbers  
1 From standby select Menu } Contacts } Speed dial.  
2 Scroll to a position number and select Add.  
3 Select a contact.  
To speed dial  
1 From standby enter the position number and select  
Sp. dial.  
2 Press  
.
To delete speed dial numbers  
1 From standby select Menu } Contacts } Speed dial.  
2 Scroll to a position number and select Delete.  
Memory status  
The number of contacts you can save in the phone or on  
the SIM card depends on available memory.  
To view the memory status  
From standby select Menu } Contacts } Settings  
} Memory status.  
33  
This is the Internet version of the user's guide. © Print only for private use.  
     
My number  
You can view and edit your own phone number. If your  
number is not saved on your SIM card, you can enter it  
yourself.  
To view your own phone number  
From standby select Menu } Contacts } My number.  
Voicemail  
If your subscription includes an answering service, callers  
can leave a voicemail message when you cannot answer  
a call. You can get your voicemail number from your  
network operator.  
To enter your voicemail number  
1 From standby select Menu } Calls } Call settings  
} Setup voicem. } Voicemail no..  
2 Enter the voicemail number and select Save.  
To call your voicemail service  
From standby press and hold down  
.
Contacts tips  
You can view tips and information about contacts.  
To view contacts tips  
From standby select Menu } Contacts } Contact tips.  
34  
This is the Internet version of the user's guide. © Print only for private use.  
     
Messaging  
Your phone supports various messaging services.  
Contact your service provider about the services you can  
use. For more information, go to  
Before you use messaging  
You must have a service centre number. The number is  
supplied by your service provider and is usually saved on  
the SIM card. If the number to your service centre is not  
saved on your SIM card, you must enter the number  
yourself.  
To enter the service centre number  
1 From standby select Menu } Messaging } Settings  
} Service centre. The number is shown if it is saved on  
the SIM card.  
2 If there is no number shown, enter the service centre  
number, including the international “+” sign and  
country/region code.  
3 Select Save.  
Text messages  
Text messages can be sent to a phone number or to  
a contact. Text messages can contain simple pictures,  
sound effects, animations, and melodies.  
35  
This is the Internet version of the user's guide. © Print only for private use.  
     
Writing and sending text messages  
For information about entering text % 13 Entering text.  
To write and send a text message  
1 From standby press  
.
2 Select Text message.  
3 Write the message and select Options  
} Send message.  
4 Select an option.  
5 Select Continue } Send.  
To add a symbol to a text message  
1 When you write the message, select Options  
} Add symbol.  
2 Select a symbol.  
To add an item to a text message  
1 When you write the message, select Options  
} Add item.  
2 Select an item.  
To change writing language  
1 When you write the message, select Options  
} Writing lang..  
2 Select a language.  
36  
This is the Internet version of the user's guide. © Print only for private use.  
       
To receive delivery reports for sent text messages  
1 From standby select Menu } Messaging } Settings  
} Delivery report.  
2 Select an option.  
Drafts  
Text messages that you do not wish to send immediately  
can be saved in Drafts. Messages that fail to be sent are  
also saved in Drafts.  
To write a text message and save it as a draft  
1 From standby press  
.
2 Select Text message.  
3 Write the message and select Options  
} Save in Drafts.  
Receiving text messages  
You are notified when you receive a text message.  
Received messages are saved in Inbox.  
To view a text message from standby  
When you receive a message, follow the instructions on  
the screen.  
To view a text message from the inbox  
1 From standby select Menu } Messaging } Inbox.  
2 Scroll to a message and select View.  
To reply to a text message  
1 When you view the message, select Options } Reply.  
2 Write the message and select Options  
} Send message.  
3 Select an option.  
4 Select Send.  
37  
This is the Internet version of the user's guide. © Print only for private use.  
       
To forward a text message  
1 From standby select Menu } Messaging } Inbox.  
2 Scroll to the message and select View } Options  
} Forward } Options } Send message.  
3 Select an option.  
4 Select Send.  
Saving text messages  
Text messages are automatically saved in Inbox. When  
Inbox is full, they are automatically saved on the SIM card.  
When both Inbox and the SIM card are full, you must  
delete messages to be able to receive new messages.  
To save a text message on the SIM card  
1 From standby select Menu } Messaging } Inbox.  
2 Scroll to the message and select View.  
3 Select Options } Save message.  
To save a phone number from a text message  
1 When you view the message, select Options  
} Save number.  
2 Scroll to the number and select Save.  
3 Enter a name for the contact and select Continue  
} Save.  
Deleting text messages  
You can delete text messages one at a time or all the  
messages in a folder at the same time.  
To delete a text message  
1 From standby select Menu } Messaging  
} Delete msgs.  
2 Scroll to a folder and select One at a time.  
3 Scroll to the message and select Delete.  
38  
This is the Internet version of the user's guide. © Print only for private use.  
     
To delete all text messages in a folder  
1 From standby select Menu } Messaging  
} Delete msgs.  
2 Scroll to a folder and select Delete all at once } Yes.  
Messaging tips  
You can view tips and information about messaging.  
To view messaging tips  
From standby select Menu } Messaging  
} Messaging tips.  
Area and cell information  
Area and cell information are text messages, (for example,  
local traffic reports) that are sent to subscribers within a  
certain network area. Contact your service provider for  
more information.  
To turn area information on  
1 From standby select Menu } Messaging } Settings  
} Area information } Subscriptions.  
2 Select Options } Enable subscr..  
To turn cell information on  
From standby select Menu } Messaging } Settings  
} Cell info: } Show info.  
39  
This is the Internet version of the user's guide. © Print only for private use.  
   
Radio (J120c only)  
The radio is included in the J120c only.  
To listen to the radio  
1 Connect the handsfree to the phone.  
2 From standby press  
.
Do not use your phone as a radio in places where  
this is prohibited.  
To view radio options  
When you play the radio, select Options.  
To search for radio channels  
Press or  
.
To change the volume  
Press or  
.
To minimize the radio  
When you play the radio, select Options } Minimize.  
The radio will continue playing in the background.  
40  
This is the Internet version of the user's guide. © Print only for private use.  
     
To return to the radio  
From standby press  
.
Saving radio channels  
You can save up to 10 preset channels.  
To save radio channels in positions 1 to 10  
When you have found a radio channel, press and hold  
down  
.
To select radio channels saved in positions 1 to 10  
When you play the radio, press  
.
To exit the radio  
Select Exit.  
Radio tips  
You can view tips and information about the radio.  
To view radio tips  
From standby select Menu } Radio } Options  
} Radio tips.  
41  
This is the Internet version of the user's guide. © Print only for private use.  
 
Settings  
Sound and alerts  
Your phone comes with a number of melodies which can  
be used as ringtones. You can also select to be alerted by  
the vibrating alert.  
To set the ringtone volume (J110c)  
1 From standby press  
.
2 Select an option.  
To set the ringtone volume (J120c)  
1 From standby select Menu } Settings } Sound & alerts  
} Ring volume.  
2 Select an option.  
Do not hold the phone to your ear when using high  
ringtones. This could damage your hearing.  
To set the ringtone  
1 From standby select Menu } Settings } Sound & alerts  
} Ringtone.  
2 Select an option.  
42  
This is the Internet version of the user's guide. © Print only for private use.  
         
To set the vibrating alert  
1 From standby select Menu } Settings } Sound & alerts  
} Vibration.  
2 Select an option.  
To set the message alert sound  
1 From standby select Menu } Settings } Sound & alerts  
} Message alert.  
2 Select an option.  
To set the key sound  
1 From standby select Menu } Settings } Sound & alerts  
} Key sound.  
2 Select an option.  
To set the alarm sound  
1 From standby select Menu } Settings } Sound & alerts  
} Alarm sound.  
2 Select an option.  
Wallpaper  
You can change the screen appearance by using  
wallpapers.  
To select a wallpaper  
1 From standby select Menu } Settings } Wallpaper.  
2 Select an option.  
43  
This is the Internet version of the user's guide. © Print only for private use.  
   
Time and date  
The time is shown when the phone is in standby. You can  
select between the 24-hour or 12-hour (am/pm) time  
format. You can also select different date formats.  
To select the time format  
1 From standby select Menu } Settings } Time and date  
} Format } Time.  
2 Select an option.  
To set the time  
1 From standby select Menu } Settings } Time and date  
} Time.  
2 Enter the time and select Save.  
To select the date format  
1 From standby select Menu } Settings } Time and date  
} Format } Date.  
2 Select an option.  
To set the date  
1 From standby select Menu } Settings } Time and date  
} Date.  
2 Enter the date and select Save.  
Language  
You can select the language for the phone menu. Most  
SIM cards automatically set the language used in the  
menu to the language of the country/region where you  
bought your SIM card. If this is not the case, the  
predefined language is English.  
To change the phone language  
1 From standby select Menu } Settings } Language.  
2 Select an option.  
44  
This is the Internet version of the user's guide. © Print only for private use.  
       
Brightness  
You can adjust the brightness of the screen.  
To set the brightness  
1 From standby select Menu } Settings } Advanced  
} Brightness.  
2 Press  
or  
to change the brightness.  
3 Select Save.  
Locks  
Automatic keylock  
Automatic keylock in standby means the keypad is locked  
a short while after you last press a key.  
To turn the automatic keylock on  
1 From standby select Menu } Settings } Advanced  
} Auto keylock.  
2 Select On.  
SIM card lock  
The SIM card lock protects your subscription, but not your  
phone itself, from unauthorized use. If you change SIM  
cards, the phone still works with the new SIM card.  
Most SIM cards are locked at the time of purchase. If the  
SIM card lock is on, you have to enter a PIN (Personal  
Identity Number) every time you turn on your phone.  
If you enter your PIN incorrectly three times in a row, the  
SIM card is blocked. This is indicated by the message  
PIN blocked. Enter PUK provided by your operator. To  
unblock it, you need to enter your PUK (Personal  
Unblocking Key). Your PIN and PUK are supplied by your  
45  
This is the Internet version of the user's guide. © Print only for private use.  
         
network operator. You can edit your PIN and turn off your  
SIM card lock at any time.  
If the message Wrong code. Attempts remaining:  
appears when you edit your PIN, you entered the  
PIN or PIN2 incorrectly.  
To unblock your SIM card  
1 When PIN blocked. Enter PUK provided by your  
operator is displayed, enter your PUK and select OK.  
2 Enter a new four- to eight-digit PIN and select OK.  
3 Re-enter the new PIN to confirm and select OK.  
To turn the SIM card lock on  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Protection } On.  
2 Enter your PIN and select OK.  
To edit your PIN  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Change PIN.  
2 Enter your PIN and select OK.  
3 Enter a new four- to eight-digit PIN and select OK.  
4 Re-enter the new PIN to confirm and select OK.  
To edit your PIN2  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Change PIN2.  
2 Enter your PIN2 and select OK.  
3 Enter a new four- to eight-digit PIN and select OK.  
4 Re-enter the new PIN to confirm and select OK.  
46  
This is the Internet version of the user's guide. © Print only for private use.  
     
Phone lock  
The phone lock protects the phone against unauthorized  
use if it is stolen and the SIM card is exchanged. You can  
change the phone lock code (which is 0000 by default) to  
any four-digit personal code.  
Automatic phone lock  
If the phone lock is set to Automatic, you do not need to  
enter your phone lock code until a different SIM card is  
inserted in the phone.  
It is important that you remember your code. If you  
should forget it, you have to hand in your phone to  
your local Sony Ericsson retailer.  
To turn the phone lock on  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Protection } On.  
2 Enter the phone lock code and select OK.  
To edit your phone lock code  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Change code.  
2 Enter the current code and select OK.  
3 Enter a new code and select OK.  
4 Re-enter the new code to confirm and select OK.  
To unlock the phone  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Protection } Off.  
2 Enter your phone lock code and select OK.  
47  
This is the Internet version of the user's guide. © Print only for private use.  
IMEI number  
You can keep a copy of your IMEI (International Mobile  
Equipment Identity) number in case your phone should  
be stolen.  
To view your IMEI number  
From standby press  
,
,
,
,
.
Master reset  
You can reset some of the settings in your phone by  
performing a master reset. Content, for example,  
contacts, pictures, messages and sounds will not be  
deleted.  
To perform a master reset  
1 From standby select Menu } Settings } Advanced  
} Master reset } Reset settings. Content will not be  
deleted.  
2 Select Continue.  
Reset all  
You can reset all the settings in your phone to the way  
they were when you bought your phone. All content, for  
example, contacts, pictures, messages and sounds will be  
deleted.  
To reset all settings  
1 From standby select Menu } Settings } Advanced  
} Master reset } Reset all. Content will be deleted.  
2 Select Continue.  
48  
This is the Internet version of the user's guide. © Print only for private use.  
       
Networks  
When you turn on your phone, it automatically selects  
your home network. If your home network is not within  
range, you may use another network, provided your  
network operator allows it. You can select the network you  
want to use.  
To select a network  
1 From standby select Menu } Calls } Call settings  
} Networks } Select network.  
2 Select an option.  
To select a search mode for networks  
1 From standby select Menu } Calls } Call settings  
} Networks } Search mode.  
2 Select an option.  
49  
This is the Internet version of the user's guide. © Print only for private use.  
   
Extras  
Alarms  
You can set a sound or the radio as an alarm signal. The  
alarm sounds even if the phone is set to silent or turned  
off. When the alarm sounds you can silence it for  
9 minutes or turn it off.  
To set the alarm  
1 From standby press  
.
2 Enter the time and select Save.  
To set the radio alarm (J120c)  
1 Connect the handsfree to the phone.  
2 From standby select Menu } Extras } Alarm clock  
} Alarm signal } Radio.  
3 Press  
4 From standby press  
.
.
5 Enter the time and select Save.  
To set the alarm signal  
1 From standby select Menu } Extras } Alarm clock  
} Alarm signal.  
2 Select an option.  
50  
This is the Internet version of the user's guide. © Print only for private use.  
   
To silence the alarm  
Press any key.  
To silence the radio alarm (J120c)  
Select Snooze.  
To turn the alarm off  
When the alarm sounds, select Turn off.  
To cancel the alarm  
1 From standby press  
2 Select Turn off.  
.
Reminders  
You can set a reminder for important occasions.  
To set a reminder  
1 From standby select Menu } Extras } Reminders  
} Add.  
2 Enter a subject and select Continue.  
3 Select an option.  
4 Enter the date and select Continue.  
5 Enter the time and select Continue.  
Timer  
Your phone has a timer that can be set to count down  
from 99 minutes and 59 seconds.  
To set the timer  
1 From standby select Menu } Extras } Timer.  
2 Enter the minutes and seconds and select Continue.  
Stopwatch  
To use the stopwatch  
From standby select Menu } Extras } Stopwatch  
} Start.  
51  
This is the Internet version of the user's guide. © Print only for private use.  
   
Calculator  
Your phone has a calculator, which can add, subtract,  
divide and multiply.  
To use the calculator  
1 From standby select Menu } Extras } Calculator.  
2 Press  
or  
to select . ÷ x - + =.  
Please note that the accuracy of the calculator is  
limited.  
3 Press the number keys to enter digits.  
My sounds  
Your phone comes with a number of standard and  
polyphonic melodies.  
To play a melody  
1 From standby select Menu } Extras } My sounds.  
2 Scroll to a melody and select Options } Play.  
To set a melody as the ringtone  
1 From standby select Menu } Extras } My sounds.  
2 Scroll to a melody and select Options } Set ringtone.  
Games  
Your phone comes with a number of games. Information  
and game controls are given in help texts for each game.  
To start a game  
1 From standby select Menu } Extras } Games.  
2 Select an option.  
To end a game  
Press  
.
52  
This is the Internet version of the user's guide. © Print only for private use.  
     
Troubleshooting  
Some problems require that you call your network  
operator, but most of the problems you can easily correct  
yourself.  
Remove the SIM card before you hand your phone in for  
repair.  
Master reset  
If you experience problems with your phone such as  
screen flickering or freezing, navigation problems, etc. you  
should reset the phone.  
To perform a master reset  
1 From standby select Menu } Settings } Advanced  
} Master reset } Reset settings. Content will not be  
deleted.  
2 Select Continue.  
53  
This is the Internet version of the user's guide. © Print only for private use.  
   
Memory capacity and speed  
If you have not restarted the phone for a while, you may  
experience problems with its memory capacity and speed.  
You can restart the phone to improve its capacity.  
1 Turn the phone off.  
2 Remove the battery cover.  
3 Remove the phone battery and then put it back in  
place.  
4 Replace the battery cover.  
5 Turn the phone on.  
Content and settings may be lost if you remove the  
battery before you turn off your phone.  
54  
This is the Internet version of the user's guide. © Print only for private use.  
Common questions  
Q: I cannot turn the phone on.  
A: Charge the phone until it has finished charging.  
Make sure that the phone is charged. Attach the charger  
and charge the phone for 2.5 hours. The battery icon may  
not appear until the phone has charged for a few minutes.  
A green battery  
means the phone  
battery is fully  
charged. A white  
battery means the  
phone battery is  
empty.  
55  
This is the Internet version of the user's guide. © Print only for private use.  
Q: I cannot charge the phone.  
A: Attach the charger properly.  
Look carefully at the picture to see how to attach the  
charger and charge the phone.  
56  
This is the Internet version of the user's guide. © Print only for private use.  
Q: How do I change phone language?  
A: From standby select Menu } Settings } Language  
and select a language.  
Q: What is my phone lock code?  
A: The default phone lock code is 0000.  
The phone lock protects the phone against unauthorized  
use if it is stolen and the SIM card is exchanged.  
To change it to any four-digit personal code:  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Change code.  
2 Enter the current code and select OK.  
3 Enter a new code and select OK.  
4 Re-enter the new code to confirm and select OK.  
Q: How do I turn on and off predictive text input  
when I write a text message?  
A: Press  
repeatedly when you enter text.  
Q: The phone turns itself off.  
A: Use the automatic keylock.  
If your phone turns itself off when being transported,  
something in your pocket or bag has probably activated  
the on/off key. Turn on the automatic keylock function  
57  
This is the Internet version of the user's guide. © Print only for private use.  
Q: How do I set up text messages?  
A: Check the service centre number in the phone.  
If the number to your service centre is not saved on your  
SIM card, you must specify the number yourself to be able  
to reply to received messages or send your own  
messages.  
Your service centre number is usually supplied with your  
SIM card. If you cannot find your service centre number,  
contact your service provider. To enter the service centre  
number:  
1 From standby select Menu } Messaging } Settings  
} Service centre. The number is shown if it is saved on  
the SIM card.  
2 If there is no number shown, enter the service centre  
number, including the international “+” sign and  
country/region code.  
3 Select Save.  
Q: I have problems using text messages on my  
phone  
A: Enter the correct text message settings.  
If you have problems sending or receiving text messages  
on your phone, some of your phone settings are probably  
incorrect. The settings are different for different operators,  
contact your network operator for the correct service  
centre setting.  
58  
This is the Internet version of the user's guide. © Print only for private use.  
Error messages  
Insert SIM card  
There is no SIM card in the phone or you may have  
inserted it incorrectly. Insert a SIM card  
Insert correct SIM card  
This error message is shown in two cases:  
The phone only works with certain SIM cards. Insert the  
correct SIM card.  
You entered your personal unblocking key code (PUK)  
incorrectly 10 times in a row. Contact your operator.  
Emerg. only  
You are within range of a network, but you are not allowed  
to use it. Some network operators allow emergency calls  
to the international emergency number 112  
No network  
There is no network within range or the received signal is  
too weak. You have to move to get a signal that is strong  
enough.  
59  
This is the Internet version of the user's guide. © Print only for private use.  
 
Password error  
You have entered your PIN or PIN2 incorrectly.  
Enter the correct PIN or PIN2 and select Yes % 45 Locks.  
PIN blocked. Enter PUK provided by your operator or  
PIN2 blocked. Enter PUK2 given by your operator.  
You have entered your PIN or PIN2 incorrectly three times  
in a row. To unblock your codes % 45 Locks.  
Fully locked  
The phone is locked. To unlock the phone % 45 Locks.  
Phone lock code:  
Your phone comes with the phone lock code 0000. You  
can change it to any four-digit code % 45 Locks.  
60  
This is the Internet version of the user's guide. © Print only for private use.  
Important information  
Sony Ericsson Consumer Web site  
On www.sonyericsson.com/cn there is a support section where help  
and tips are only a few clicks away. Here you find the latest  
computer software updates and tips on how to use your product  
more efficiently.  
Guidelines for Safe and Efficient Use  
Please read this information before using your mobile  
phone.  
These instructions are intended for your safety. Please  
follow these guidelines. If the product has been  
subject to any of the conditions listed bellow or you  
have any doubt of the proper function make sure to  
have the product checked by certified service partner before  
charging or using it. Failure to do so might lead to risk for product  
malfunction or even a potential hazard to your health.  
Recommendations for safe use of product (mobile  
phone, battery, charger and other accessories)  
Always treat your product with care and keep it in a clean and  
dust-free place.  
Warning! May explode if disposed of in fire.  
Do not expose your product to liquid or moisture or humidity.  
Do not expose your product to extreme high or low  
temperatures. Do not expose the battery to  
temperatures above +60°C (+140°F).  
Do not expose your product to open flames or lit  
tobacco products.  
Do not drop, throw or try to bend your product.  
Do not paint your product.  
61  
This is the Internet version of the user's guide. © Print only for private use.  
     
Do not attempt to disassemble or modify your  
product. Only Sony Ericsson authorised personnel  
should perform service.  
Do not close your product with an object inserted  
between keypad and display; this may damage  
your product. <only for products with a clamshell  
design>  
Do not use your product near medical equipment or in hospitals  
without requesting permission from your treating physician or  
authorized medical staff.  
Do not use your product when in, or around aircraft, or areas  
showing the sign “turn off two-way radio”.  
Do not use your product in an area where a potentially explosive  
atmosphere exists, for example, at a petrol station, oil depot or  
chemical plant.  
Do not place your product or install wireless equipment in the  
area above an air bag in your car.  
CHILDREN  
KEEP OUT OF CHILDREN'S REACH. DO NOT ALLOW  
CHILDREN TO PLAY WITH YOUR MOBILE PHONE  
OR ITS ACCESSORIES. THEY COULD HURT  
THEMSELVES OR OTHERS, OR COULD  
ACCIDENTALLY DAMAGE THE MOBILE PHONE OR  
ACCESSORY. YOUR MOBILE PHONE OR ITS  
ACCESSORY MAY CONTAIN SMALL PARTS THAT  
COULD BE DETACHED AND CREATE A CHOKING HAZARD.  
Power supply (Charger)  
Connect the AC power adapter only to designated power sources  
as marked on the product. Make sure the cord is positioned so that  
it will not be subjected to damage or stress. To reduce risk of  
electric shock, unplug the unit from any power source before  
attempting to clean it. The AC power adapter must not be used  
outdoors or in damp areas. Never alter the cord or plug. If the plug  
will not fit into the outlet, have a proper outlet installed by a qualified  
electrician.  
62  
This is the Internet version of the user's guide. © Print only for private use.  
Use only Sony Ericsson branded original chargers intended for use  
with your mobile phone. Other chargers may not be designed to the  
same safety and performance standards.  
Battery  
We recommend that you fully charge the battery before you use  
your mobile phone for the first time. A new battery or one that has  
not been used for a long time could have reduced capacity the first  
few times it is used. The battery should only be charged in  
temperatures between +5°C (+41°F) and +45°C (+113°F).  
Use only Sony Ericsson branded original batteries intended for use  
with your mobile phone. Using other batteries and chargers could  
be dangerous.  
Talk and standby times depend on several different conditions such  
as signal strength, operating temperature, application usage  
patterns, features selected and voice or data transmissions when  
the mobile phone is being used. Under normal conditions, the  
stand-by time for this battery is up to 300 hours.  
Turn off your mobile phone before removing the battery. Do not put  
the battery into your mouth. Battery electrolytes may be toxic if  
swallowed. Do not let the metal contacts on the battery touch  
another metal object. Doing this could short-circuit and damage the  
battery. Use the battery for the intended purpose only.  
Personal medical devices  
Mobile phones may affect the operation of cardiac pacemakers and  
other implanted equipment. Please avoid placing the mobile phone  
over the pacemaker, e.g. in your breast pocket. When using the  
mobile phone, use it at the ear opposite side of the body to the  
pacemaker. If a minimum distance of 15 cm (6 inches) is kept  
between the mobile phone and the pacemaker, the risk of  
interference is limited. If you have any reason to suspect that  
interference is taking place, immediately turn off your mobile phone.  
Contact your cardiologist for more information.  
For other medical devices, please consult your physician and the  
manufacturer of the device.  
63  
This is the Internet version of the user's guide. © Print only for private use.  
Driving  
Please check if local laws and regulations restrict the use of mobile  
phones while driving or require drivers to use handsfree solutions.  
We recommend that you use only Sony Ericsson handsfree  
solutions intended for use with your product.  
Please note that because of possible interference to electronic  
equipment, some vehicle manufacturers forbid the use of mobile  
phones in their vehicles unless a handsfree kit with an external  
antenna supports the installation.  
Always give full attention to driving and pull off the road and park  
before making or answering a call if driving conditions so require.  
Emergency calls  
Mobile phones operate using radio signals, which cannot guarantee  
connection in all conditions. You should therefore never rely solely  
upon any mobile phone for essential communications (e.g. medical  
emergencies).  
Emergency calls may not be possible in all areas, on all cellular  
networks, or when certain network services and/or mobile phone  
features are in use. Check with your local service provider.  
Antenna  
This phone contains a built in antenna. Use of antenna devices not  
marketed by Sony Ericsson specifically for this model could  
damage your mobile phone, reduce performance, and produce SAR  
levels above the established limits (see below).  
Efficient use  
Hold your mobile phone as you would any other phone. Do not  
cover the top of the phone when in use, as this affects call quality  
and may cause the phone to operate at a higher power level than  
needed, thus shortening talk and standby times.  
64  
This is the Internet version of the user's guide. © Print only for private use.  
Radio frequency (RF) exposure and SAR  
Your mobile phone is a low-power radio transmitter and receiver.  
When it is turned on, it emits low levels of radio frequency energy  
(also known as radio waves or radio frequency fields).  
Governments around the world have adopted comprehensive  
international safety guidelines, developed by scientific  
organizations, e.g. ICNIRP (International Commission on  
Non-Ionizing Radiation Protection) and IEEE (The Institute of  
Electrical and Electronics Engineers Inc.), through periodic and  
thorough evaluation of scientific studies. These guidelines establish  
permitted levels of radio wave exposure for the general population.  
The levels include a safety margin designed to assure the safety of  
all persons, regardless of age and health, and to account for any  
variations in measurements.  
Specific Absorption Rate (SAR) is the unit of measurement for the  
amount of radio frequency energy absorbed by the body when  
using a mobile phone. The SAR value is determined at the highest  
certified power level in laboratory conditions, but the actual SAR  
level of the mobile phone while operating can be well below this  
value. This is because the mobile phone is designed to use the  
minimum power required to reach the network.  
Variations in SAR below the radio frequency exposure guidelines  
do not mean that there are variations in safety. While there may be  
differences in SAR levels among mobile phones, all Sony Ericsson  
mobile phone models are designed to meet radio frequency  
exposure guidelines.  
A separate leaflet with SAR information for this mobile phone model  
is included with the material that comes with this mobile phone. This  
information can also be found, together with more information on  
radio frequency exposure and SAR, on: www.sonyericsson.com/cn.  
65  
This is the Internet version of the user's guide. © Print only for private use.  
Disposal of old electrical & electronic  
equipment  
This symbol indicates that all electrical and electronic  
equipment included shall not be treated as household  
waste. Instead it shall be left at the appropriate  
collection point for the recycling of electrical and electronic  
equipment. By ensuring this product is disposed of correctly, you  
will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused  
by inappropriate waste handling of this product. The recycling of  
materials will help to conserve natural resources. For more detailed  
information about recycling of this product, please contact your  
local city office or your household waste disposal service.  
Disposing of the battery  
Please check local regulations for disposal of batteries  
or call your local Sony Ericsson Call Center for  
information.  
The battery should never be placed in municipal  
waste. Use a battery disposal facility if available.  
66  
This is the Internet version of the user's guide. © Print only for private use.  
20  
Declaration of substances  
When this product is operated under the conditions in the  
product manual, the environmental protection period  
(EPUP) is 20 years.  
Toxic or hazardous substances  
Part Name  
Lead MercuryCadmium Hexavalent Polybrominated Polybrominated  
(Pb) (Hg)  
(Cd)  
chromium  
(Cr6+)  
biphenyls  
(PBB)  
diphenyl ethers  
(PBDE)  
Phone  
X
X
O
O
O
O
O
O
O
O
O
O
Battery  
Accessories  
and charger  
X
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the  
homogeneous materials for this part is below the limit requirement in  
SJ/T 11363-2006.  
X: Indicates that this toxic or hazardous substance contained in at least one of  
the homogeneous materials used for this part is above the limit requirement in  
SJ/T 11363-2006.(Currently there are no alternative technologies available)  
WARNING:  
If your device requires an adapter for insertion into the handset or  
another device, do not insert the card directly without the required  
adapter.  
67  
This is the Internet version of the user's guide. © Print only for private use.  
Protection of personal information  
To safeguard your privacy and prevent information being  
accessible to a third party, you should erase all personal  
data before selling or disposing of the product. To delete  
personal data, perform a master reset.  
DELETION OF MATERIAL FROM THE PHONE MEMORY  
DOES NOT ENSURE THAT SAID INFORMATION  
CANNOT BE RECOVERED BY A SUBSEQUENT USER.  
SONY ERICSSON DOES NOT WARRANT AGAINST A  
SUBSEQUENT USER OF THE DEVICE ACCESSING  
YOUR INFORMATION AND DOES NOT ASSUME ANY  
RESPONSIBILITY FOR SUBSEQUENT DISCLOSURE OF  
SAID INFORMATION EVEN IF A MASTER RESET HAS  
BEEN PERFORMED. If you are concerned about such  
potential disclosure retain your device or secure its  
permanent destruction.  
Accessories  
Sony Ericsson recommends use of Sony Ericsson original  
accessories for safe and efficient use of its products. Use of  
third-party accessories may decrease performance or pose a risk  
to your health or safety.  
LOUDNESS WARNING:  
Please adjust the audio volume cautiously when using third-party  
audio accessories to avoid volume levels that may be harmful to  
your hearing. Sony Ericsson does not test use of third-party audio  
accessories with this mobile phone. Sony Ericsson recommends  
using only Sony Ericsson original audio accessories.  
68  
This is the Internet version of the user's guide. © Print only for private use.  
 
End User Licence Agreement  
This wireless device, including without limitation any media  
delivered with the device, (“Device”)contains software owned by  
Sony Ericsson Mobile Communications AB and its affiliated  
companies (“Sony Ericsson”) and its third party suppliers and  
licensors (“Software”).  
As user of this Device, Sony Ericsson grants you a non-exclusive,  
non-transferable, non-assignable license to use the Software solely  
in conjunction with the Device on which it is installed. Nothing  
herein shall be construed as a sale of the Software to a user of this  
Device.  
You shall not reproduce, modify, distribute, reverse engineer,  
decompile, otherwise alter or use any other means to discover the  
source code of the Software or any component of the Software. For  
avoidance of doubt, you are at all times entitled to transfer all rights  
and obligations to the Software to a third party, solely together with  
the Device with which you received the Software, provided always  
that such third party agrees in writing to be bound by these rules.  
You are granted this license for a term of the useful life of this  
Device. You can terminate this license by transferring all your rights  
to the Device on which you have received the Software to a third  
party in writing. If you fail to comply with any of the terms and  
conditions set out in this license, it will terminate with immediate  
effect.  
Sony Ericsson and its third party suppliers and licensors are the  
sole and exclusive owner of and retain all rights, title and interest in  
and to the Software. Sony Ericsson, and, to the extent that the  
Software contains material or code of a third party, such third party,  
shall be entitled third party beneficiaries of these terms.  
The validity, construction and performance of this license shall be  
governed by the laws of Sweden. The foregoing shall apply to the  
full extent permitted by, when applicable, statutory consumer rights.  
69  
This is the Internet version of the user's guide. © Print only for private use.  
Limited Warranty  
Communications AB, SE-221 88 Lund, Sweden, (Sony Ericsson) or  
its local affiliated company provides this Limited Warranty for your  
mobile phone and original accessory delivered with your mobile  
phone (hereinafter referred to as “Product”).  
Should your Product need warranty service, please return it to the  
dealer from whom it was purchased, or contact your local  
Sony Ericsson Call Center (national rates may apply) or visit  
www.sonyericsson.com/cn to get further information.  
WHAT WE WILL DO  
If, during the warranty period, this Product fails to operate under  
normal use and service, due to defects in design, materials or  
workmanship, Sony Ericsson authorised distributors or service  
partners, in the country/region* where you purchased the Product,  
will, at their option, either repair or replace the Product in  
accordance with the terms and conditions stipulated herein.  
Sony Ericsson and its service partners reserve the right to charge  
a handling fee if a returned Product is found not to be under  
warranty according to the conditions below.  
Please note that some of your personal settings, downloads or  
other information may be lost when your Sony Ericsson Product is  
repaired or replaced. At present Sony Ericsson may be prevented  
by applicable law, other regulation or technical restrictions from  
making a backup copy of certain downloads. Sony Ericsson does  
not take any responsibility for any lost information of any kind and  
will not reimburse you for any such loss. You should always make  
backup copies of all the information stored on your Sony Ericsson  
Product such as downloads, calendar and contacts before handing  
in your Sony Ericsson Product for repair or replacement.  
70  
This is the Internet version of the user's guide. © Print only for private use.  
CONDITIONS  
1
The warranty is valid only if the original proof of purchase issued  
to the original purchaser by a Sony Ericsson authorised dealer,  
specifying the date of purchase and serial number**, for this  
Product, is presented with the Product to be repaired or  
replaced. Sony Ericsson reserves the right to refuse warranty  
service if this information has been removed or changed after the  
original purchase of the Product from the dealer.  
2
3
If Sony Ericsson repairs or replaces the Product, the repaired or  
replaced Product shall be warranted for the remaining time of the  
original warranty period or for thirty (30) days from the date of  
repair, whichever is longer. Repair or replacement may involve  
the use of functionally equivalent reconditioned units. Replaced  
parts or components will become the property of Sony Ericsson.  
This warranty does not cover any failure of the Product due to  
normal wear and tear, or due to misuse, including but not limited  
to use in other than the normal and customary manner, in  
accordance with the Sony Ericsson instructions for use and  
maintenance of the Product. Nor does this warranty cover any  
failure of the Product due to accident, software or hardware  
modification or adjustment, acts of God or damage resulting  
from liquid.  
A rechargeable battery can be charged and discharged  
hundreds of times. However, it will eventually wear out - this is  
not a defect. When the talk-time or standby time is noticeably  
shorter, it is time to replace your battery. Sony Ericsson  
recommends that you use only batteries and chargers approved  
by Sony Ericsson.  
Minor variations in display brightness and color may occur  
between phones. There may be tiny bright or dark dots on the  
display. These are called defective pixels and occur when  
individual dots have malfunctioned and can not be adjusted.  
Two defective pixels are deemed acceptable.  
Minor variations in the appearance of the camera image may  
occur between phones. This is not uncommon in digital cameras  
and does not mean that the camera is defective in any way.  
71  
This is the Internet version of the user's guide. © Print only for private use.  
4
Since the cellular system on which the Product is to operate is  
provided by a carrier independent from Sony Ericsson,  
Sony Ericsson will not be responsible for the operation,  
availability, coverage, services or range of that system.  
This warranty does not cover Product failures caused by  
installations, modifications, or repair or opening of the Product  
performed by a non-Sony Ericsson authorised person.  
The warranty does not cover Product failures which have been  
caused by use of accessories or other peripheral devices which  
are not Sony Ericsson branded original accessories intended for  
use with the Product.  
5
6
7
8
Tampering with any of the seals on the Product will void the  
warranty.  
THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN  
OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY.  
ALL IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED  
WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS  
LICENSORS BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE  
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST  
PROFITS OR COMMERCIAL LOSS; TO THE FULL EXTENT  
THOSE DAMAGES CAN BE DISCLAIMED BY LAW.  
Some countries/regions/states do not allow the exclusion or  
limitation of incidental or consequential damages, or limitation of the  
duration of implied warranties, so the preceding limitations or  
exclusions may not apply to you.  
The warranty provided does not affect the consumer's statutory  
rights under applicable legislation in force, nor the consumer's  
rights against the dealer arising from their sales / purchase contract.  
* In some countries/regions additional information is requested.  
If so, this is clearly shown on the valid proof of purchase.  
72  
This is the Internet version of the user's guide. © Print only for private use.  
FCC Statement  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) This device must accept any interference  
received, including interference that may cause undesired  
operation.  
73  
This is the Internet version of the user's guide. © Print only for private use.  
Declaration of Conformity J110c  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAA 1002042-BV  
and in combination with our accessories, to which this declaration  
relates is in conformity with the appropriate standards 3GPP TS  
51.010-1, EN 301489-7, EN 60950, following the provisions of  
Radio Equipment and Telecommunication Terminal Equipment  
directive 99/5/EC with requirements covering EMC directive  
89/336/EEC, and Low Voltage directive 73/23/EEC.  
Lund, January 2007  
Shoji Nemoto, Head of Product Business Group GSM/UMTS  
We fulfil the requirements of the R&TTE Directive (99/5/EC).  
74  
This is the Internet version of the user's guide. © Print only for private use.  
 
Declaration of Conformity J120c  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAA 1002041-BV  
and in combination with our accessories, to which this declaration  
relates is in conformity with the appropriate standards 3GPP TS  
51.010-1, EN 301489-7, EN 60950, following the provisions of  
Radio Equipment and Telecommunication Terminal Equipment  
directive 99/5/EC with requirements covering EMC directive  
89/336/EEC, and Low Voltage directive 73/23/EEC.  
Lund, January 2007  
Shoji Nemoto, Head of Product Business Group GSM/UMTS  
We fulfil the requirements of the R&TTE Directive (99/5/EC).  
75  
This is the Internet version of the user's guide. © Print only for private use.  
 
Sony Ericsson Mobile Communications AB  
SE-221 88 Lund, Sweden  
EN/LZT 108 9323 R2A  
Printed in China  
This is the Internet version of the user's guide. © Print only for private use.  

Sharp CD Player CD DD4500 User Manual
Seagate SAVVIO ST9300505SS User Manual
Seagate HAWK 2LP ST31230WC User Manual
Seagate FreeAgent Pro ST305004FPA1E2 RK User Manual
Samsung GT S5660 User Manual
RocketFish RF KL12 User Manual
Philips AJ3970 User Manual
Panasonic CF VDD272 User Manual
Oregon Scientific WS902 User Manual (1)
Oregon Scientific RM106A User Manual