Sony Ericsson Cell Phone Z750i User Manual

Congratulations on your purchase of the Sony Ericsson  
Z750i. Capture and share quality moments. For additional  
phone content, go to www.sonyericsson.com/fun.  
Register now to get a suite of tools, free online storage,  
special offers, news and competitions at  
For product support, go to www.sonyericsson.com/support.  
 
This is the Internet version of the User's guide. © Print only for private use.  
Contents  
Contents  
1
 
This is the Internet version of the User's guide. © Print only for private use.  
2
Contents  
 
This is the Internet version of the User's guide. © Print only for private use.  
Bluetooth is a trademark or registered trademark  
of Bluetooth SIG Inc. and any use of such mark  
by Sony Ericsson is under licence.  
The Liquid Identity logo, BestPic, PlayNow,  
MusicDJ, PhotoDJ, TrackID and VideoDJ  
are trademarks or registered trademarks of  
Sony Ericsson Mobile Communications AB.  
Sony Ericsson Z750i  
UMTS/HSDPA 850/1900/2100  
GSM 850/900/1800/1900  
This User guide is published by Sony Ericsson  
Mobile Communications AB or its local affiliated  
company, without any warranty. Improvements  
and changes to this User guide necessitated  
by typographical errors, inaccuracies of current  
information, or improvements to programs and/  
or equipment, may be made by Sony Ericsson  
Mobile Communications AB at any time and  
without notice. Such changes will, however, be  
incorporated into new editions of this User guide.  
Sony is a trademark of Sony Corporation.  
Memory Stick Micro, M2, the Memory Stick logo  
and Sony are trademarks or registered trademarks  
of Sony Corporation.  
Ericsson is a trademark or registered trademark  
of Telefonaktiebolaget LM Ericsson.  
All rights reserved.  
Adobe Photoshop Album Starter Edition is  
a trademark or registered trademark of Adobe  
Systems Incorporated.  
ActiveSync, Microsoft, Windows, PowerPoint,  
Outlook and Vista are trademarks or registered  
trademarks of Microsoft Corporation in the US  
and other countries.  
©Sony Ericsson Mobile Communications AB, 2007  
Publication number: 1200-9988.2  
Please note:  
Some of the services in this User guide are not  
supported by all networks. This also applies to  
the GSM International Emergency Number 112.  
Please contact your network operator or service  
provider if you are in doubt whether you can use  
a particular service or not.  
Please read the Guidelines for safe and efficient use  
and the Limited warranty chapters before you use  
your phone.  
Google and Google Maps are trademarks of  
Google Inc.  
T9™ Text Input is a trademark or a registered  
trademark of Tegic Communications. T9™ Text  
Input is licensed under one or more of the following:  
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,  
5,945,928, and 6,011,554; Canadian Pat. No.  
1,331,057, United Kingdom Pat. No. 2238414B;  
Hong Kong Standard Pat. No. HK0940329; Republic  
of Singapore Pat. No. 51383; Euro.Pat. No. 0 842  
463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE,  
GB; and additional patents are pending worldwide.  
Your phone has the capability to download,  
store and forward additional content, for example,  
ringtones. The use of such content may be restricted  
or prohibited by rights of third parties, including but  
not limited to restriction under applicable copyright  
laws. You, and not Sony Ericsson, are entirely  
responsible for additional content that you download  
to or forward from your phone. Prior to your use of  
any additional content, please verify that your intended  
use is properly licensed or is otherwise authorized.  
Sony Ericsson does not guarantee the accuracy,  
integrity or quality of any additional content or any  
other third party content. Under no circumstances will  
Sony Ericsson be liable in any way for your improper  
use of additional content or other third party content.  
Java and all Java based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the U.S. and other countries.  
End-user licence agreement for Sun™ Java™ J2ME™.  
3
 
This is the Internet version of the User's guide. © Print only for private use.  
Restrictions: Software is confidential copyrighted  
information of Sun and title to all copies is retained  
by Sun and/or its licensors. Customer shall not  
modify, decompile, disassemble, decrypt, extract,  
or otherwise reverse engineer Software. Software  
may not be leased, assigned, or sublicensed, in  
whole or in part.  
Instruction symbols  
These symbols appear in the User  
guide.  
Note  
Export Regulations: Software, including technical  
data, is subject to U.S. export control laws,  
Tip  
including the U.S. Export Administration Act and  
its associated regulations, and may be subject  
to export or import regulations in other countries.  
Customer agrees to comply strictly with all such  
regulations and acknowledges that it has the  
responsibility to obtain licences to export, re-  
export, or import Software. Software may not be  
downloaded, or otherwise exported or re-exported  
(i) into, or to a national or resident of, Cuba, Iraq,  
Iran, North Korea, Libya, Sudan, Syria (as such  
listing may be revised from time to time) or any  
country to which the U.S. has embargoed goods;  
or (ii) to anyone on the U.S. Treasury Department's  
list of Specially Designated Nations or the U.S.  
Commerce Department's Table of Denial Orders.  
Restricted Rights: Use, duplication or disclosure  
by the United States government is subject to the  
restrictions as set forth in the Rights in Technical  
Data and Computer Software Clauses in DFARS  
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2)  
as applicable.  
Other product and company names mentioned  
herein may be the trademarks of their respective  
owners.  
Warning  
A service or function is network-  
or subscription-dependent.  
Contact your network operator  
for details.  
>
Use a selection or navigation  
key to scroll and select. See  
Represents moving up on centre  
navigation key.  
Represents moving down on  
centre navigation key.  
Represents moving right on  
centre navigation key.  
Represents moving left on  
centre navigation key.  
Any rights not expressly granted herein are reserved.  
All illustrations are for illustration only and may not  
accurately depict the actual phone.  
4
 
This is the Internet version of the User's guide. © Print only for private use.  
Getting started  
Assembly  
Before you start using your phone, you  
need to insert a SIM card and the battery.  
Turning on the phone  
To turn on the phone  
To insert the SIM card  
1 Press and hold down  
2 Select a mode:  
.
1 Remove the battery cover.  
2 Slide the SIM card into its holder with  
the gold coloured contacts facing down.  
• Normal mode – full functionality.  
• Flight mode – limited functionality.  
3 Enter your SIM card PIN, if requested  
and select OK.  
To insert the battery  
4 Select a language.  
5 Select Cont. > Yes to use the set-up  
wizard while settings are downloaded.  
If you want to correct a mistake when  
you enter your PIN, press  
.
SIM card  
The SIM (Subscriber Identity Module)  
card, which you get from your network  
operator, contains information about  
your subscription. Always turn off your  
phone and detach the charger before  
you insert or remove the SIM card.  
1 Insert the battery with the label side up  
and the connectors facing each other.  
2 Close and slide the battery cover into  
place.  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
5
           
Flight mode  
You can save contacts on the SIM card  
before you remove it from your phone.  
See To copy names and numbers  
to the SIM card on page 19.  
In Flight mode the network and radio  
transceivers are turned off to prevent  
disturbance to sensitive equipment.  
PIN  
You can use the Bluetooth™ function in  
Flight mode.  
You may need a PIN (Personal  
Identification Number) to activate the  
services in your phone. Your PIN is  
supplied by your network operator.  
Each PIN digit appears as *, unless it  
starts with emergency number digits,  
for example, 112 or 911. You can see  
and call an emergency number  
without entering a PIN.  
Startup screen  
The startup screen appears when  
you turn your phone on. See Using  
pictures on page 38.  
Standby  
After you have turned your phone on  
and entered your PIN, the name of the  
network operator appears. This view is  
called stand-by.  
If you enter the wrong PIN three times in  
a row, the SIM card is blocked. See SIM  
card lock on page 62.  
6
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
Help in your phone  
Charging the battery  
The phone battery is partly charged  
when you buy it.  
Help and information are available in  
your phone. See Navigation on page 12.  
To use the set-up wizard  
1 From stand-by select Menu > Settings  
> the General tab > Setup wizard.  
2 Select an option.  
To charge the battery  
2.5 h.  
To view information about functions  
Scroll to a function and select Info, if  
available. In some cases, Info appears  
under Options.  
To view the phone demonstration  
From stand-by select Menu  
> Entertainment > Demo tour.  
To view status information  
From stand-by press  
.
1 Connect the charger to the phone. It  
takes approximately 2.5 hours to fully  
charge the battery. Press a key to view  
the screen.  
2 Remove the charger by tilting the plug  
upwards.  
You can use your phone while it is  
charging. You can charge the battery  
at any time and for more or less than  
2.5 hours. You can interrupt the charging  
without damaging the battery.  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
7
       
Phone overview  
15  
1
Ear speaker  
Screen  
14  
1
2
2
3
4
5
6
7
8
Centre navigation key  
Selection key  
Green key  
Camera key  
C key (Clear)  
Connector for charger,  
handsfree and USB cable  
9
On/off key  
13  
3
10 Activity menu key  
11 Red key  
12  
11  
10  
4
5
6
12 Selection key  
13 Navigation key  
14 Light sensor  
15 Video telephony camera  
7
9
8
8
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
16 Play/pause key  
16  
17  
17 Volume, digital zoom keys  
18 Memory slot  
18  
Getting started  
9
 
This is the Internet version of the User's guide. © Print only for private use.  
Menu overview  
PlayNow™*  
Internet*  
Entertainment  
Games  
TrackID™  
VideoDJ™  
PhotoDJ™  
MusicDJ™  
Remote control  
Record sound  
Demo tour  
Camera  
Messaging  
Media  
Write new  
Inbox  
Email  
Web feeds  
Drafts  
Outbox  
Sent messages  
Saved messages  
My friends*  
Call voicemail  
Templates  
Manage messages  
Settings  
Radio  
Location services  
Contacts  
Google Maps  
My favourites  
Status info  
Log  
Myself  
New contact  
Settings  
10  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
Calls**  
Organizer  
File manager**  
Alarms  
All  
Answered  
Dialled  
Missed  
Applications  
Video call  
Calendar  
Tasks  
Notes  
Synchronization  
Timer  
Stopwatch  
Calculator  
Code memo  
Settings**  
General  
Profiles  
Sounds & alerts  
Ring volume  
Ringtone  
Silent mode  
Increasing ring  
Vibrating alert  
Message alert  
Key sound  
Display  
Wallpaper  
Themes  
Startup screen  
Screen saver  
Clock size  
Brightness  
Calls  
Connectivity*  
Bluetooth  
USB  
Phone name  
Network sharing  
Synchronization  
Speed dial  
Smart search  
Divert calls  
Manage calls  
Time & cost*  
Show/hide my no. Device management  
Handsfree  
Time & date  
Language  
Update service  
Voice control  
New events  
Shortcuts  
Flight mode  
Security  
Setup wizard  
Phone status  
Master reset  
Mobile networks  
Internet settings  
Streaming settings  
Accessories  
Open to answer  
* Some menus are operator-, network- and subscription-dependent.  
** You can use the navigation key to scroll between tabs in submenus. For more information, see Navigation  
on page 12.  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
11  
To return to stand-by  
Navigation  
The main menus are shown as icons.  
Some submenus include tabs.  
Press  
.
To end a function  
Press  
.
To navigate the phone menus  
To navigate your menu  
1 From stand-by select Media.  
2 Use the navigation key to move up,  
down, left and right through the menus.  
To delete items  
Press  
to delete items such as  
numbers, letters, pictures and sounds.  
Shortcuts  
You can use keypad shortcuts to go  
directly to a menu. Menu numbering  
starts from the top left icon and moves  
across and then down row by row.  
1 From stand-by select Menu.  
2 Use the navigation key to move through  
the menus.  
To go directly to a main menu  
From stand-by select Menu and press  
To scroll between the tabs  
,
,
or  
To use navigation key shortcuts  
From stand-by press or  
.
Scroll to a tab by pressing the navigation  
key left or right.  
,
,
To select actions on the screen  
to go directly to a function.  
Select an action shown at the bottom  
of the screen by pressing the left  
or right selection key or the centre  
navigation key.  
To edit a navigation key shortcut  
1 From stand-by select Menu > Settings  
> the General tab > Shortcuts.  
2 Scroll to an option and select Edit.  
3 Scroll to a menu option and select  
Shortc.  
To view options for an item  
Select Options to, for example, edit.  
12  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
         
Activity menu  
To insert a memory card  
The activity menu gives you quick  
access to certain functions.  
1
To open the activity menu  
Press  
.
Activity menu tabs  
• New events – missed calls and new  
messages.  
• Running apps – applications that  
are running in the background.  
• My shortcuts – add your favourite  
functions to access them quickly.  
• Internet – quick access to the  
Internet.  
Open the cover and insert the memory  
card with the gold coloured contacts  
facing up.  
To remove a memory card  
2
3
File manager  
You can use the file manager to  
handle files saved in the phone  
memory or on a memory card.  
You may have to purchase a memory  
card separately.  
Memory card  
Your phone supports Memory Stick  
Micro™ (M2™) adding more storage  
space to your phone. It can also be  
used as a portable memory card with  
other compatible devices.  
Open the cover and press the edge  
of the memory card to release and  
remove it.  
Getting started  
13  
 
This is the Internet version of the User's guide. © Print only for private use.  
       
To view memory card options  
From stand-by select Menu > Organizer  
> File manager > the On memory card  
tab.  
To view information about files  
From stand-by select Menu > Organizer  
1
1
> File manager  
.
2 Find a file and select Options  
2 Select Options.  
> Information.  
Handling files  
To move a file in the file manager  
You can move and copy files between  
your phone, a computer and a memory  
card. Files are saved on the memory  
card first and then in the phone  
memory. Unrecognized files are saved  
in the Other folder.  
1
2
From stand-by select Menu > Organizer  
> File manager  
Find a file and select Options > Manage  
file > Move  
.
.
3 Select an option.  
To select more than one file  
in a folder  
You can create subfolders to move  
or copy files to. You can select more  
than one or all the files in a folder at  
the same time for all folders except  
Games and Applications.  
1
From stand-by select Menu > Organizer  
> File manager  
2 Scroll to a folder and select Open.  
Select Options > Mark > Mark several  
.
3
.
If the memory is full, delete some content  
to create space.  
4 For each file you want to mark, scroll  
to the file and select Mark.  
File manager tabs  
To delete a file from the file manager  
The file manager is divided into three  
tabs, and icons indicate where the  
files are saved.  
1
From stand-by select Menu > Organizer  
> File manager  
.
2 Find the file and press  
.
• All files – all content in the phone  
memory and on a memory card  
• On memory card – all content on  
a memory card  
• In phone – all content in the phone  
memory  
14  
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
To enter text using T9™ Text Input  
1 From stand-by select, for example,  
Menu > Messaging > Write new  
> Text message.  
Phone language  
You can select a language to use in  
your phone.  
To change the phone language  
1 From stand-by select Menu > Settings  
> the General tab > Language  
> Phone language.  
2 If  
down  
is not displayed, press and hold  
to change to T9 Text Input.  
3 Press each key only once, even if the  
letter you want is not the first letter on  
the key. For example, to write the  
2 Select an option.  
word “Jane”, press  
. Write the whole word before  
looking at the suggestions.  
,
,
,
Entering text  
You can use multitap text input or T9™  
Text Input  
to enter text. The T9 Text  
4 Use  
or  
to view suggestions.  
Input method uses a built-in dictionary.  
5 Press  
to accept a suggestion.  
To change text input method  
When you enter text press and hold  
To enter text using multitap  
1 From stand-by select, for example,  
Menu > Messaging > Write new  
> Text message.  
down  
.
To shift between capitals  
and lower-case letters  
When you enter text, press  
2 If  
down  
input.  
3 Press  
is displayed, press and hold  
to change to multitap  
.
To enter numbers  
repeatedly until the  
desired letter appears.  
4 When a word is written, press  
add a space.  
When you enter text, press and hold  
down  
.
to  
To enter full stops and commas  
When you enter text, press  
To add words to the built-in dictionary  
1 When you enter text using T9 Text  
Input, select Options > Spell word.  
2 Write the word using multitap input  
and select Insert.  
.
Getting started  
 
This is the Internet version of the User's guide. © Print only for private use.  
15  
         
Calling  
Do not hold your phone to your ear  
when waiting. When the call connects,  
your phone gives a loud signal.  
Making and receiving calls  
You need to turn on your phone and  
be within range of a network.  
To answer a call  
Press  
.
To make a call  
To reject a call  
1 From stand-by enter a phone number  
(with international country code and  
area code, if applicable).  
Press  
.
To change the ear speaker volume  
during a call  
Press the volume key up or down.  
2 Press  
.
To mute the microphone during a call  
You can call numbers from your contacts  
and Call list on page 21. You can also  
use your voice to make calls. See Voice  
1 Press and hold down  
2 Press and hold down  
resume.  
.
again to  
To turn the loudspeaker on during  
a call  
To end a call  
Press  
.
Select SpkrOn.  
Do not hold your phone to your ear  
when using the loudspeaker. This could  
damage your hearing.  
To make international calls  
1 From stand-by press  
sign appears.  
until a “+”  
2 Enter the country code, area code  
(without the first zero) and phone  
number.  
To view missed calls from stand-by  
Press  
events tab and select a number.  
Press to open the call list.  
and scroll to the New  
3 Press  
.
To re-dial a number  
When Retry? appears select Yes.  
16  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
               
Networks  
To view your local emergency  
numbers  
1 From stand-by select Menu  
> Contacts.  
2 Scroll to New contact and select  
Options > Special numbers  
> Emergency nos.  
Your phone switches automatically  
between GSM and 3G (UMTS) networks  
depending on availability. Some network  
operators allow you to switch networks  
manually.  
To switch networks manually  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Mobile  
networks > GSM/3G networks.  
2 Select an option.  
Video call  
See a person on the screen during  
calls. Both parties need a subscription  
that supports the 3G (UMTS) service,  
and you need to be within range of  
a 3G (UMTS) network. 3G (UMTS)  
Emergency calls  
Your phone supports international  
emergency numbers, for example,  
112 and 911. These numbers can  
normally be used to make emergency  
calls in any country, with or without  
the SIM card inserted, if a 3G (UMTS)  
or GSM network is within range.  
service is available when  
appears.  
To make a video call  
1 From stand-by enter a phone number  
(with international country code and  
area code if applicable).  
2 Select Options > Make video call.  
To use the zoom with an outgoing  
video call  
In some countries, other emergency  
numbers may also be promoted. Your  
network operator may therefore have  
saved additional local emergency  
numbers on the SIM card.  
Press or  
.
To view video call options  
During the call, select Options.  
To make an emergency call  
From stand-by enter 112  
(the international emergency number)  
Contacts  
You can save names, phone numbers  
and personal information in Contacts.  
Information can be saved in the phone  
memory or on the SIM card.  
and press  
.
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
17  
         
Default contact  
Calling contacts  
You can choose which contact  
information is shown as default. If  
Phone contacts is selected as default,  
your contacts show all the information  
saved in Contacts. If you select SIM  
contacts as default, your contacts  
show names and numbers saved on  
the SIM card.  
To call a phone contact  
From stand-by select Menu > Contacts  
2 Scroll to a contact and press  
1
.
.
To go directly to a contact, from stand-  
by press and hold down  
.
To call a SIM contact from phone  
contacts  
To select default contacts  
1 From stand-by select Menu  
> Contacts.  
1
From stand-by select Menu > Contacts  
.
2 Scroll to New contact and select  
Options > SIM contacts.  
2 Scroll to New contact and select  
Options > Advanced > Default  
contacts.  
3 Scroll to a contact and press  
.
To call with Smart search  
1 From stand-by press and hold down  
to enter a contact name  
3 Select an option.  
-
Phone contacts  
or a phone number. All entries which  
match the sequence of digits or letters  
are shown in a list.  
Phone contacts can contain names,  
phone numbers and personal  
information. They are saved in the  
phone memory.  
2 Scroll to a contact or a phone number  
and press  
.
To add a phone contact  
From stand-by select Menu > Contacts.  
2 Scroll to New contact and select Add.  
3 Enter the name and select OK.  
4 Enter the number and select OK.  
5 Select a number option.  
To turn Smart search on or off  
1 From stand-by select Menu > Settings  
> the Calls tab > Smart search.  
2 Select an option.  
1
6 Scroll between tabs and select the fields  
to add information.  
7 Select Save.  
18  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
Editing contacts  
SIM contacts  
SIM contacts can contain names and  
numbers only. They are saved on the  
SIM card.  
To add information to a phone contact  
From stand-by select Menu > Contacts.  
2 Scroll to a contact and select Options  
> Edit contact.  
3 Scroll between the tabs and select Add.  
4 Select an option and an item to add.  
5 Select Save.  
1
To add a SIM contact  
From stand-by select Menu > Contacts.  
1
2 Scroll to New contact and select Add.  
3 Enter the name and select OK.  
4 Enter the number and select OK.  
5 Select a number option and add more  
information, if available.  
If your subscription supports Calling Line  
Identification (CLI) service, you can  
assign personal ringtones to contacts.  
6 Select Save.  
To copy names and numbers  
to the SIM card  
From stand-by select Menu > Contacts  
When you copy all contacts from your  
phone to the SIM card, all existing SIM  
card information is replaced.  
1
.
2 Scroll to New contact and select  
Options > Advanced > Copy to SIM.  
3 Select an option.  
To call a SIM contact  
From stand-by select Menu > Contacts  
2 Scroll to a contact and press  
1
.
.
To automatically save names and  
phone numbers on the SIM card  
From stand-by select Menu > Contacts  
2 Scroll to New contact and select  
Options > Advanced > Auto save on  
SIM.  
To copy names and numbers  
to phone contacts  
From stand-by select Menu > Contacts  
2 Scroll to New contact and select  
Options > Advanced > Copy from  
SIM.  
1
.
1
.
3 Select an option.  
3 Select an option.  
To save contacts on a memory card  
From stand-by select Menu > Contacts  
Deleting contacts  
1
.
2 Scroll to New contact and select  
Options > Advanced > Back up to m.  
card.  
To delete a contact  
From stand-by select Menu > Contacts  
2 Scroll to a contact and press  
1
.
.
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
19  
   
To delete all phone contacts  
Synchronizing contacts  
1
From stand-by select Menu > Contacts  
.
Contacts can be synchronized with a  
Microsoft Exchange Server (Microsoft®  
Outlook®). For more information see  
2 Scroll to New contact and select  
Options > Advanced > Delete all  
contacts.  
Myself  
Sending contacts  
You can enter information about  
yourself and, for example, send your  
business card.  
To send a contact  
From stand-by select Menu > Contacts  
2 Scroll to a contact and select Options  
> Send contact.  
1
.
To enter Myself information  
1
From stand-by select Menu > Contacts.  
3 Select a transfer method.  
2 Scroll to Myself and select Open.  
3 Scroll to an option and edit the  
information.  
Make sure the receiving device supports  
the transfer method you select.  
Sorting contacts  
4 Select Save.  
To select the sort order for contacts  
To add your own business card  
1
From stand-by select Menu > Contacts  
.
1
From stand-by select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Sort order.  
3 Select an option.  
2 Scroll to Myself and select Open.  
3 Scroll to My contact info and select  
Add > Create new.  
4 Scroll between tabs and select the  
fields to add information.  
5 Enter the information and select Save.  
Memory status  
The number of contacts you can save in  
your phone or on the SIM card depends  
on available memory.  
To enter a symbol select Options > Add  
symbol > Insert.  
To view memory status  
1
From stand-by select Menu > Contacts.  
To send your business card  
From stand-by select Menu > Contacts  
2 Scroll to Myself and select Open.  
2 Scroll to New contact and select  
Options > Advanced > Memory  
status.  
1
.
20  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
3 Scroll to My contact info and select  
Send.  
4 Select a transfer method.  
Call list  
You can view information about recent  
calls.  
Make sure the receiving device supports  
the transfer method you select.  
To call a number from the call list  
1 From stand-by press  
and scroll to  
a tab.  
Groups  
2 Scroll to a name or a number and  
press  
You can create a group of phone  
numbers and email addresses from  
Phone contacts to send messages to.  
also use groups (with phone numbers)  
when you create accepted callers  
.
To add a call list number to contacts  
1 From stand-by press  
and scroll to  
a tab.  
2 Scroll to the number and select Save.  
3 Select New contact to create a new  
contact or select an existing contact  
to add the number to.  
To create a group of numbers  
and email addresses  
From stand-by select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Groups.  
3 Scroll to New group and select Add.  
4 Enter a name for the group and select  
Cont.  
1
To clear the call list  
1 From stand-by press  
.
2 Scroll to the All tab and select Options  
> Delete all.  
Speed dial  
Speed dialling lets you select nine  
contacts that you can dial quickly. The  
contacts can be saved in positions 1-9.  
5 Scroll to New and select Add.  
6
For each contact phone number or email  
address you want to mark, scroll to it and  
select Mark  
7 Select Cont. > Done.  
.
To add contacts to speed dial numbers  
1
From stand-by select Menu > Contacts  
.
2 Scroll to New contact and select  
Options > Speed dial.  
Calling  
21  
 
This is the Internet version of the User's guide. © Print only for private use.  
         
3 Scroll to a position number and select  
Add.  
To record a voice command  
to be used for voice dialling  
1 From stand-by select Menu > Settings  
> the General tab > Voice control  
> Voice dialling > Activate.  
2 Select Yes > New voice command  
and select a contact. If the contact  
has more than one number, select the  
number to add the voice command to.  
3 Record a voice command such as  
“John mobile”.  
4 Follow the instructions that appear. Wait  
for the tone and say the command to  
record. The voice command is played  
back to you.  
5 If the recording sounds OK, select  
Yes. If not, select No and repeat steps  
3 and 4.  
4 Select a contact.  
To speed dial  
From stand-by enter the position number  
and press  
.
Voicemail  
If your subscription includes an  
answering service, callers can leave  
a voicemail message when you cannot  
answer a call.  
To enter your voicemail number  
1 From stand-by select Menu  
> Messaging > Settings > Voicemail  
number.  
2 Enter the number and select OK.  
Voice commands are saved in the phone  
memory only. They cannot be used in  
another phone.  
To call your voicemail service  
From stand-by press and hold  
down  
.
To re-record a voice command  
1 From stand-by select Menu > Settings  
> the General tab > Voice control  
> Voice dialling > Edit names.  
Voice control  
By creating voice commands you can:  
Voice dial – call someone by saying  
their name  
Activate voice dialling by saying  
a “magic word”  
2
Scroll to a command and select Options  
> Replace voice  
Wait for the tone and say the command.  
.
3
Answer and reject calls when you  
use a handsfree  
22  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
         
2 Follow the instructions that appear and  
select Cont. Wait for the tone and say  
the magic word.  
3 Select Yes to accept or No for a new  
recording.  
Voice dialling  
You can call a contact by saying the  
name.  
To voice dial  
1 From stand-by press and hold down  
a volume key.  
4 Follow the instructions that appear  
and select Cont.  
2 Wait for the tone and say a recorded  
name, for example “John mobile”. The  
name is played back to you and the  
call is connected.  
5 Select where your magic word is to be  
activated.  
To make a call using the magic word  
1 Say the magic word.  
2 Wait for the tone and say a voice  
command.  
To make a call with a handsfree  
Press the handsfree key.  
The magic word  
Voice answering  
You can record and use a voice  
command as a magic word to activate  
voice dialling without pressing any keys.  
Your handsfree must be connected to  
your phone when using the magic word.  
When you use a handsfree, you can  
answer or reject incoming calls with  
your voice.  
To activate voice answering and  
record voice answer commands  
You should choose a long, unusual word  
or phrase that can easily be distinguished  
from ordinary background speech.  
Bluetooth handsfree does not support this  
feature.  
1 From stand-by select Menu > Settings  
> the General tab > Voice control  
> Voice answer > Activate.  
2 Follow the instructions that appear  
and select Cont. Wait for the tone  
and say “Answer”, or another word.  
3 Select Yes to accept or No for a new  
recording.  
To activate and record the magic word  
1 From stand-by select Menu > Settings  
> the General tab > Voice control  
> Magic word > Activate.  
4 Follow the instructions that appear  
and select Cont. Wait for the tone  
and say “Busy”, or another word.  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
23  
     
5 Select Yes to accept or No for a new  
recording.  
6 Follow the instructions that appear and  
select Cont.  
7 Select where your voice answering  
is to be activated.  
To divert calls  
1 From stand-by select Menu > Settings  
> the Calls tab > Divert calls.  
2 Select a call type and a divert option.  
3 Select Activate.  
4 Enter the number to divert calls to and  
select OK.  
To answer a call using voice commands  
Say “Answer”.  
More than one call  
To reject a call using voice commands  
Say “Busy”.  
You can handle more than one call at  
a time. For example, you can put an  
ongoing call on hold, while you make  
or answer a second call. You can also  
switch between the two calls. You  
cannot answer a third call without  
ending one of the first two calls.  
Diverting calls  
You can divert calls, for example,  
to an answering service.  
When Restrict calls is used, some  
divert call options are not available.  
Call waiting  
When call waiting is used, you hear  
a beep if you receive a second call.  
Divert call options  
Standard options are:  
To activate call waiting  
From stand-by select Menu > Settings  
> the Calls tab > Manage calls > Call  
waiting > Activate.  
• Divert always – divert all your calls  
• When busy – if a call is ongoing  
• Not reachable – if your phone is  
turned off or unreachable  
To make a second call  
1 During the call, select Options > Hold.  
This puts the ongoing call on hold.  
2 Select Options > Add call.  
• No reply – if a call is not answered  
in a specified time  
3 Enter the number to call and press  
.
24  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
       
To answer a second call  
Receiving a third voice call  
You cannot answer a third call without  
ending one of the first two calls or  
joining them.  
During the call, press  
. This puts the  
ongoing call on hold.  
To reject a second call  
During the call, press  
with the ongoing call.  
Conference calls  
With a conference call, you can have a  
joint conversation with up to five people.  
and continue  
To end an ongoing call and answer  
a second call  
To add a new participant  
During the call, select Replace active  
call.  
1 During the call, select Options > Hold.  
This puts the joined calls on hold.  
2 Select Options > Add call.  
Handling two voice calls  
You can have calls ongoing and on  
hold at the same time.  
3 Enter the number to call and press  
.
4 Select Options > Join calls to add the  
new participant.  
To switch between two calls  
5 Repeat this task to add more  
participants.  
During the call, press  
.
To join two calls  
To release a participant  
During the call, select Options > Join  
calls.  
1 Select Options > Release part.  
2 Select the participant to release.  
To connect two calls  
To have a private conversation  
1 During the call, select Options > Talk  
to and select the participant to talk to.  
2 To resume the conference call, select  
Options > Join calls.  
During the call, select Options  
> Transfer call. You are disconnected  
from both calls.  
To end an ongoing call and return  
to the call on hold  
My numbers  
You can view, add and edit your own  
phone numbers.  
First press  
and then  
.
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
25  
       
To check your phone numbers  
From stand-by select Menu > Contacts.  
If you divert incoming calls, you cannot  
use some restrict calls options.  
1
2 Scroll to New contact and select  
Options > Special numbers > My  
numbers.  
Restrict calls options  
Standard options are:  
3 Select an option.  
• All outgoing – all outgoing calls  
• Outgoing intl – all outgoing  
international calls  
• Outgoing intl roam. – all outgoing  
international calls except to your  
home country  
• All incoming – all incoming calls  
• Inc. when roaming – all incoming  
calls when you are abroad  
Accept calls  
You can choose to receive calls from  
certain phone numbers only.  
To add numbers to the accepted  
callers list  
1 From stand-by select Menu > Settings  
> the Calls tab > Manage calls  
> Accept calls > Only from list.  
2 Scroll to New and select Add.  
3 Select a contact or Groups.  
To restrict calls  
1 From stand-by select Menu > Settings  
> the Calls tab > Manage calls  
> Restrict calls.  
See Groups on page 21.  
2 Select an option.  
3 Select Activate.  
4 Enter your password and select OK.  
To accept all calls  
From stand-by select Menu > Settings  
> the Calls tab > Manage calls  
> Accept calls > All callers.  
Fixed dialling  
Fixed dialling allows calls to be made  
only to certain numbers saved on  
the SIM card. The fixed numbers are  
protected by your PIN2.  
Restricted dialling  
You can restrict outgoing and incoming  
calls. A password from your service  
provider is required.  
Partial numbers can be saved. For  
example, saving 0123456 allows calls  
to be made to all numbers starting  
with 0123456.  
26  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
         
To check the call time  
From stand-by select Menu > Settings  
> the Calls tab > Time & cost > Call  
timers.  
When fixed dialling is used, you cannot  
view or manage any phone numbers saved  
on the SIM card but you can still call the  
international emergency number, 112.  
To use fixed dialling  
From stand-by select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Special numbers > Fixed  
dialling > Activate.  
Showing or hiding your phone  
number  
You can select to show or hide your  
phone number when you make a call.  
1
3 Enter your PIN2 and select OK.  
4 Select OK again to confirm.  
To hide your phone number  
1 From stand-by select Menu > Settings  
> the Calls tab > Show/hide my no.  
2 Select Hide number.  
To save a fixed number  
1
From stand-by select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Special numbers > Fixed  
dialling > Fixed numbers > New  
number.  
Open to answer  
You can set the phone to answer calls  
when you open the phone.  
3 Enter the information and select Save.  
To turn Open to answer on  
1 From stand-by select Menu > Settings  
> the Calls tab > Open to answer.  
2 Select On.  
Call time and cost  
During a call, the duration of the call  
is shown. You can check the duration  
of your last call, outgoing calls and the  
total time of your calls.  
Calling  
 
This is the Internet version of the User's guide. © Print only for private use.  
27  
         
Before you use messaging  
Messaging  
You must have a service centre  
number. The number is supplied by  
your service provider and is usually  
saved on the SIM card. If the number  
to your service centre is not saved  
on your SIM card, you must enter the  
number yourself.  
Receiving and saving messages  
You are notified when you receive a  
message. Messages are automatically  
saved in the phone memory. When the  
phone memory is full, you can delete  
messages or save them on a memory  
card or on the SIM card.  
To enter a service centre number  
1 From stand-by select Menu  
> Messaging > Settings > Text  
message > Service centre. The  
number is shown if it is saved on  
the SIM card.  
2 If there is no number shown, select Edit.  
3 Scroll to New ServiceCentre and select  
Add.  
To save a message on a memory card  
From stand-by select Menu  
> Messaging > Settings > General  
> Save to > Memory card.  
To save a message on the SIM card  
1 From stand-by select Menu  
> Messaging and select a folder.  
2 Scroll to a message and select  
Options > Save message.  
4 Enter the number, including the  
international “+” sign and country code.  
5 Select Save.  
To view a message from the inbox  
1 From stand-by select Menu  
> Messaging > Inbox.  
To write and send a text message  
1 From stand-by select Menu  
> Messaging > Write new > Text  
message.  
2 Write the message and select Cont.  
> Contacts look-up.  
2 Scroll to the message and select View.  
To delete a message  
1 From stand-by select Menu  
> Messaging and select a folder.  
2 Scroll to the message and press  
.
3 Select a recipient and select Send.  
Text messages  
Text messages can contain simple  
pictures, sound effects, animations,  
and melodies.  
If you send a text message to a group,  
you will be charged for each member.  
See Groups on page 21.  
28  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
To copy and paste text in  
a text message  
1 When you write the message, select  
Options > Copy & paste.  
2 Select Copy all or Mark & copy. Scroll  
to and mark text in the message.  
3 Select Options > Copy & paste  
> Paste.  
Picture messages  
Picture messages can contain text,  
pictures, slides, sound recordings, video  
clips, signatures and attachments. You  
can send picture messages to a phone  
or an email address.  
Before you use picture messaging  
You must set an Internet profile and  
the address of your message server.  
If no Internet profile or message  
server exists, you can receive all  
the settings automatically from  
your network operator or at  
To add an item to a text message  
1 When you write the message, select  
Options > Add item.  
2 Select an option and then an item.  
To convert a text message  
to a picture message  
1 When you write the message, select  
Options > To picture msg.  
2 Continue creating a picture message.  
To select an MMS profile  
1 From stand-by select Menu  
> Messaging > Settings > Picture  
message > MMS profile.  
2 Select a profile.  
To call a number in a text message  
When you view the message, scroll  
To set the message server address  
1 From stand-by select Menu  
> Messaging > Settings > Picture  
message.  
2 Scroll to MMS profile and select Edit.  
3 Select Options > Edit.  
to the phone number and press  
.
To turn long messages on  
1 From stand-by select Menu  
> Messaging > Settings > Text  
message.  
2 Select Max. msg length > Max.  
available.  
4 Scroll to Message server and select  
Edit.  
5
Enter the address and select OK > Save.  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
29  
     
To create and send a picture  
message  
1 From stand-by select Menu  
> Messaging > Write new > Picture  
msg.  
2 Enter text. To add items to the message,  
press and hold down , scroll right  
and select an item.  
3 Select Cont. > Contacts look-up.  
4 Select a recipient and select Send.  
Message options  
You can set standard options for all  
messages or choose specific settings  
each time you send a message.  
To set text message options  
1 From stand-by select Menu  
> Messaging > Settings > Text  
message.  
2 Scroll to an option and select Edit.  
Receiving picture messages  
You can select how to download  
your picture messages. Standard  
options when you download picture  
messages are:  
To set picture message options  
1 From stand-by select Menu  
> Messaging > Settings > Picture  
message.  
2 Scroll to an option and select Edit.  
• Always – automatic download.  
• Ask in roaming – ask to download  
when not in home network.  
• Not in roaming – do not download  
when not in home network.  
• Always ask – ask to download.  
• Off – new messages appear in the  
Inbox.  
To set message options for a specific  
message  
1 When the message is ready and  
a recipient is selected, select Options  
> Advanced.  
2 Scroll to an option and select Edit.  
Templates  
If you often use the same phrases and  
pictures in a message, you can save  
the message as a template.  
To set automatic download  
1 From stand-by select Menu  
> Messaging > Settings > Picture  
message > Auto download.  
2 Select an option.  
To add a text message template  
1 From stand-by select Menu  
> Messaging > Templates > New  
template > Text.  
To save an item in a picture message  
When you view a picture message  
select Options > Save items and  
select an item.  
30  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
2 Insert text or select Options to add  
items. Select OK.  
3 Enter a title and select OK.  
To record and send a voice message  
1 From stand-by select Menu  
> Messaging > Write new > Voice  
message.  
2 Record the message and select Stop  
> Send > Contacts look-up.  
To use a picture message template  
1 From stand-by select Menu  
> Messaging > Templates.  
2 Scroll to a template and select Use.  
3 When the message is ready, select  
Cont. > Contacts look-up.  
3 Select a recipient and select Send.  
Email  
You can use standard email functions  
and your computer email address in  
your phone.  
4 Select a recipient and select Send.  
To add a picture message template  
1 From stand-by select Menu  
> Messaging > Templates > New  
template > Picture msg.  
2 Enter text. To add items to the message,  
press and hold down , scroll right  
and select an item.  
Before you use email  
You can use the set-up wizard to check  
if settings are available for your email  
account or you can enter them manually.  
You can also receive the settings at  
3 Select Save, enter a title and select OK.  
To create an email account  
1 From stand-by select Menu  
> Messaging > Email > Accounts.  
2 Scroll to New account and select  
Add.  
To save a message as a template  
1 From stand-by select Menu  
> Messaging > Inbox.  
2 Scroll to the message and select  
Options > View > Save as template.  
If you enter settings manually, you can  
contact your email provider for more  
information. An email provider could be  
the company that supplied your email  
address.  
Voice messages  
You can send and receive a sound  
recording as a voice message.  
The sender and recipient must have a  
subscription supporting picture messaging.  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
31  
       
To write and send an email message  
1 From stand-by select Menu  
To reply to an email message  
1 From stand-by select Menu  
> Messaging > Email > Inbox.  
2 Scroll to the message and select  
Options > Reply.  
3 Write the reply and select OK.  
4 Select Continue > Send.  
> Messaging > Email > Write new.  
2 Select Add > Enter email address.  
Enter the email address and select OK.  
3 To enter more recipients, select Edit.  
Scroll to an option and select Add  
> Enter email address. Enter the email  
address and select OK. When you are  
ready, select Done.  
4 Scroll to Subject:. Select Edit and  
enter a subject and then select OK.  
5 Scroll to Text:. Select Edit and enter  
the text and then select OK.  
To view an attachment in an email  
message  
When you view the message, select  
Options > Attachments > View.  
To save an attachment in an email  
message  
6 Scroll to Attachments:. Select Add  
and select a file to attach.  
7 Select Cont. > Send.  
When you view the message, select  
Options > Attachments > View  
> Save.  
To receive and read an email message  
1 From stand-by select Menu  
> Messaging > Email > Inbox  
> Options > Send&rec.  
2 Scroll to the message and select View.  
Synchronizing email  
Email can be synchronized with a  
Microsoft Exchange Server (Microsoft®  
Outlook®). For more information  
Active email account  
If you have several email accounts,  
you can change which one is active.  
To save an email message  
1 From stand-by select Menu  
> Messaging > Email > Inbox.  
2 Scroll to the message and select  
Options > Save message.  
To change the active email account  
1 From stand-by select Menu  
> Messaging > Email > Accounts.  
2 Select an account.  
32  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
To delete an email (POP3)  
1 From stand-by select Menu  
> Messaging > Email > Inbox.  
2 Scroll to the message and select  
Options > Mark for deletion.  
Before you use My friends  
If no settings exist in your phone,  
you need to enter server settings.  
Your service provider can provide  
standard settings information such as:  
Username  
Password  
Marked emails will be deleted when  
you next connect to your server.  
Server address  
Internet profile  
To delete an email (IMAP4)  
1 From stand-by select Menu  
> Messaging > Email > Inbox.  
2 Scroll to the message and select  
Options > Mark for deletion.  
3 Select Options > Clear inbox.  
To enter My friends server settings  
1 From stand-by select Menu  
> Messaging > My friends  
> Configure.  
2 Scroll to a setting and select Add.  
Marked email messages will be deleted  
in the phone and on the server.  
To log in to the My friends server  
From stand-by select Menu  
> Messaging > My friends > Log in.  
Push email  
You can receive notification in your  
phone from your email server that  
you have new email messages.  
To log out of the My friends server  
Select Options > Log out.  
To turn on push email notification  
From stand-by select Menu  
> Messaging > Email > Settings  
> Push email.  
To add a chat contact  
1 From stand-by select Menu  
> Messaging > My friends  
> the Contacts tab.  
2 Select Options > Add contact.  
My friends  
You can connect and log in to the My  
friends server to communicate online  
with chat messages.  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
33  
     
To send a chat message  
1 From stand-by select Menu  
> Messaging > My friends  
> the Contacts tab.  
2 Scroll to a contact and select Chat.  
3 Write the message and select Send.  
Chat group  
A chat group can be started by your  
service provider, by an individual My  
friends user or by yourself. You can  
save chat groups by saving a chat  
invitation or by searching for a specific  
chat group.  
Status  
To create a chat group  
1 From stand-by select Menu  
> Messaging > My friends > the Chat  
groups tab.  
2 Select Options > Add chat group  
> New chat group.  
You can show your status, for example,  
Happy or Busy, to your contacts only.  
You can also show your status to all  
users on the My friends server.  
To show my status  
1 From stand-by select Menu  
> Messaging > My friends > Options  
> Settings > Show my status.  
2 Select an option.  
3 Select who to invite from your  
contacts list and select Cont.  
4 Enter a short invitation text and select  
Cont. > Send.  
To update your own status  
1 From stand-by select Menu  
> Messaging > My friends > the  
My Status tab.  
To add a chat group  
1 From stand-by select Menu  
> Messaging > My friends > the Chat  
groups tab > Options > Add chat  
group.  
2 Edit the information.  
2 Select an option.  
34  
Messaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
Conversation history is saved between  
log out and when you log in again to  
let you return to chat messages from  
previous conversations.  
Imaging  
Camera and video recorder  
You can take pictures and record  
video clips to view, save or send.  
To save a conversation  
1 From stand-by select Menu  
> Messaging > My friends  
> the Conversations tab.  
2 Scroll to a conversation and select  
Options > Advanced > Save  
conversation.  
Viewfinder and camera keys  
The screen is your viewfinder when  
you use the camera.  
Using the camera  
To activate the camera  
From stand-by press the camera icon  
on the centre navigation key  
To view a saved conversation  
1 From stand-by select Menu  
> Messaging > My friends  
.
> the Conversations tab.  
2 Select Options > Saved conv.  
To take a picture  
1 Activate the camera.  
2 Press the centre navigation key to take  
a picture  
3 The picture is automatically saved on  
Area and cell information  
.
Area and cell information are text  
messages, for example, local traffic  
reports that are sent to subscribers  
within a certain network area.  
the memory card.  
Do not record with a strong light source  
in the background. Use a support or the  
self-timer to avoid a blurred picture.  
To turn area information on  
1 From stand-by select Menu  
> Messaging > Settings > Area info.  
2 Scroll to Reception and select Edit  
> On.  
To record a video clip  
1 Activate the camera and use the  
navigation key to scroll to  
.
2 Press fully down to start recording.  
Imaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
35  
               
To stop recording  
To view information about settings  
1 Press  
.
Scroll to a setting and select Info.  
2 The video clip is automatically saved  
on the memory card or in the phone  
memory.  
Camera shortcuts  
Key  
Shortcut  
To use zoom  
Camera: Shoot mode  
Video: Video size  
Press the navigation key up or down.  
To adjust brightness  
Press the volume keys up or down.  
Night mode  
Self-timer  
To view pictures and video clips  
1 Activate the camera and use the  
navigation key to select camera  
or video.  
2 Select > Options > View all pictures  
or View all clips.  
Camera key guide  
Transferring pictures  
Transfer to and from your computer  
You can use Bluetooth™ wireless  
technology and the USB cable to  
transfer pictures and video clips  
between your computer and phone.  
on page 51 for more information.  
To improve a picture with Photo fix  
1 Activate the camera and take a picture.  
2 Select Options > Photo fix > OK.  
Camera icons and settings  
Icons on the screen inform what  
the current setting is. More camera  
settings are available in Options.  
You can view, enhance and organize  
your pictures and video clips on your  
computer by installing the Adobe™  
Photoshop™ Album Starter Edition  
or the Sony Ericsson Media Manager.  
These are included on the CD  
To change settings  
Activate the camera > Options. Select  
the option you want to change.  
that comes with your phone and  
are available for download at  
36  
Imaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
           
Picture blog  
Make sure the receiving device supports  
the transfer method you select.  
A picture blog is a personal Web page.  
If your subscription supports this  
service, you can send pictures to a blog.  
To receive a picture or video clip  
Follow the instructions that appear.  
Web services may require a separate  
licence agreement between you and the  
service provider. Additional regulations  
and charges may apply. Contact your  
service provider.  
Camera printing  
You can print camera pictures using the  
USB cable connected to a compatible  
printer.  
To send camera pictures to a blog  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
You can also print using a Bluetooth  
compatible printer.  
To print camera pictures using the  
USB cable  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
3 Select Options > Print.  
3 Select Options > Send > To blog.  
4 Add title and text.  
5 Select OK > Publish.  
To go to a blog address from contacts  
4 Select an option.  
1
From stand-by select Menu > Contacts.  
5 Connect the USB cable to the phone.  
6 Connect the USB cable to the printer.  
7 Wait for feedback in the phone and  
select OK.  
2 Scroll to a contact and select a Web  
address.  
3 Select Go to.  
8 Enter printer settings, if required and  
select Print.  
To send a picture or video clip  
1 From stand-by select Media.  
2 Scroll to an item and select Options  
> Send.  
You should disconnect and re-connect  
the USB cable if there is a printer error.  
3 Select a transfer method.  
Imaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
37  
   
3 Press  
4 Select a tag.  
5 For each picture you want to tag, use  
and scroll to a tag.  
Pictures  
You can view, add, edit or delete pictures  
in Media  
.
or  
to scroll to the picture and  
Using pictures  
select a tag.  
You can add a picture to a contact, use  
it during phone startup, as a wallpaper  
in standby or as a screen saver.  
To create a new photo tag  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
To use pictures  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
3 Select Options > Use as.  
4 Select an option.  
3 Press down  
and select Options  
> New tag.  
4 Enter a name and select OK.  
5 Select a tag icon.  
6 Press the centre navigation key to tag  
the picture.  
To view pictures in a slide show  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
3 Select Options > Slide show.  
4 Select a mood.  
PhotoDJ™ and VideoDJ™  
You can edit pictures and video clips.  
To edit and save a picture  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
3 Select Options > Edit in PhotoDJ™.  
4 Edit the picture.  
Photo tags  
You can tag pictures to categorize them.  
To tag pictures  
1 From stand-by select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
5 Select Options > Save.  
38  
Imaging  
 
This is the Internet version of the User's guide. © Print only for private use.  
           
To edit and save a video clip  
From stand-by select Menu > Organizer  
Entertainment  
1
To navigate your media see Navigation  
on page 12.  
> File manager > Videos  
.
2 Scroll to a video clip and select Options  
> VideoDJ™.  
3 Edit the video clip.  
Stereo portable handsfree  
4 Select Options > Save.  
To trim a video clip  
1
From stand-by select Menu > Organizer  
> File manager > Videos  
.
2 Scroll to a video clip and select  
Options > VideoDJ™ > Edit > Trim.  
3 Select Set to set the starting point and  
select Start.  
4 Select Set to set the ending point and  
select End.  
5 Select Trim > Options > Save.  
To use the handsfree  
Themes  
Connect the portable handsfree.  
Music stops when you receive a call  
and resumes when the call has ended.  
You can change the appearance of  
the screen through items such as  
colours and wallpaper. You can also  
create new themes and download  
them. For more information, go to  
Music and video players  
To play music  
1 From stand-by select Media and scroll  
to Music.  
2 Scroll to a title and select Play.  
To set a theme  
1
From stand-by select Menu > Organizer  
> File manager  
.
2 Scroll to Themes and select Open.  
3 Scroll to a theme and select Set.  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
39  
             
To play videos  
To send music  
1 From stand-by select Media and scroll  
to Video.  
1 From stand-by select Media and scroll  
to Music.  
2 Scroll to a title and select Play.  
2 Scroll to a title and select Options  
> Send.  
3 Select a transfer method.  
Music and video controls  
To stop playing music  
Press the centre navigation key.  
Make sure the receiving device supports  
the transfer method you select.  
To resume playing music  
Press the centre navigation key.  
To receive music  
Follow the instructions that appear.  
To change the volume  
When you listen to music, press the  
volume keys up or down.  
Browsing files  
Music and video files are saved and  
categorized.  
To move between tracks  
When you listen to music, press  
• Artists – list tracks you have transferred  
using Media Manager.  
or  
.
• Albums – list music tracks by album  
in your phone and on a memory card.  
• Tracks – list all music tracks in your  
phone and on a memory card.  
To fast forward and rewind  
When you listen to music, press and  
hold down or  
.
• Audio books – list audio books you  
have transferred from your computer.  
• Podcasts – list all podcasts you have  
transferred from your computer.  
• Playlists – create own lists of tracks.  
• Video – list all video clips in your  
phone or on a memory card.  
To return to the player menus  
Select Back.  
To return to the players  
Select Options > Resume.  
To exit the player menus  
Press and hold down  
.
40  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
Playlists  
To delete a playlist  
You can create playlists to organize  
files. You can sort the files by artist or  
title. Files can be added to more than  
one playlist.  
1 From stand-by select Media and scroll  
to Music > Playlists.  
2 Scroll to a playlist and press  
.
To view information about a track  
Scroll to a track and select Options  
> Information.  
Deleting a playlist, or a file from a playlist,  
does not delete the file from the memory,  
just the reference to the file.  
Transferring music from  
a computer  
With Sony Ericsson Media Manager,  
included on the CD with your phone,  
you can transfer music from CDs, your  
computer or that you have purchased to  
the phone memory or a memory card.  
To create a playlist  
1 From stand-by select Media and scroll  
to Music > Playlists.  
2 Scroll to New playlist and select Add.  
3 Enter a name and select OK.  
4 Scroll to a track and select Mark.  
5 Select Add to add the track to the  
playlist.  
Sony Ericsson Media Manager software  
is also available for download at  
To add files to a playlist  
1 From stand-by select Media and scroll  
to Music > Playlists.  
2 Scroll to the playlist and select Open.  
3 Select Options > Add music.  
4 Scroll to a track and select Mark.  
5 Select Add to add the track to the  
playlist.  
Before you use Media Manager  
You need one of these operating  
systems to use Media Manager on  
your computer:  
Windows Vista™ (32-bit and 64-bit  
versions of: Ultimate, Enterprise,  
Business, Home Premium, Home  
Basic)  
To remove tracks from a playlist  
1 From stand-by select Media and scroll  
to Music > Playlists.  
Windows XP (Pro or Home)  
2 Scroll to a playlist and select Open.  
3 Scroll to the track and press  
.
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
41  
     
To install Media Manager  
Online music and video clips  
1 Turn on your computer and insert  
the CD. The CD starts automatically  
and the installation window opens.  
2 Select a language and click OK.  
3 Click Install Sony Ericsson Media  
Manager and follow the instructions.  
You can view video clips and listen to  
music by streaming them to your phone  
from the Internet. If settings are not  
already in your phone, see Settings on  
page 47. For more information, contact  
your network operator or go to  
To use Media Manager  
1 Connect the phone to a computer with  
the USB cable that came with the  
phone.  
To select a data account for streaming  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Streaming  
settings.  
2 Computer: Start/Programs/  
Sony Ericsson/Media Manager.  
3 Phone: Select Mass storage > Menu  
> Settings > the Connectivity tab  
> USB > USB default mode > Mass  
storage. The phone will shut down in  
this mode but will restart again when it  
is disconnected from the USB cable.  
2 Select the data account to use.  
To stream music and video clips  
1 From stand-by select Menu > Internet.  
2 Select Options > Go to > Bookmarks.  
3 Select a link to stream from.  
Do not remove the USB cable from your  
phone or computer during transfer, as  
this may corrupt the memory card or the  
phone memory.  
TrackID™  
TrackID™ is a free music recognition  
service. Search for song titles, artists  
and album names.  
4 For safe disconnection of the USB  
cable in mass storage mode, right-  
click the removable disk icon in  
Windows Explorer and select Eject.  
For details on transferring music, refer  
To search for song information  
When you hear a song through a  
loudspeaker, from standby select  
Menu > Entertainment > TrackID™.  
When the radio is playing select  
Options > TrackID™.  
to Media Manager Help. Click  
the top right corner of the Media  
Manager window.  
in  
42  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
To save channels in positions 1 to 10  
When you have found a radio channel,  
Radio  
Do not use your phone as a radio  
in places where this is prohibited.  
press and hold down  
.
To select channels saved in positions  
1 to 10  
When the radio is playing, press  
To listen to the radio  
1 Connect the handsfree to the phone.  
2 From stand-by select Menu > Radio.  
.
To change the volume  
When the radio is playing, press the  
volume keys up or down.  
PlayNow™  
You can listen to music before you  
purchase and download it to your phone.  
To automatically search for channels  
When the radio is playing, select  
Search.  
This service is not available in all  
countries. In some countries you  
can purchase music from some of  
the world’s top musical artists.  
To manually search for channels  
When the radio is playing, press  
or  
.
.
Before you use PlayNow™  
You must have the required settings in  
your phone. See Settings on page 47.  
To switch between preset channels  
When the radio is playing, press or  
To listen to PlayNow™ music  
1 From stand-by select Menu  
> PlayNow™.  
Saving channels  
You can save up to 20 preset channels.  
To save channels  
When you have found a radio channel  
select Options > Save.  
2 Select music from a list.  
Downloading from PlayNow™  
The price appears when you select to  
download and save a music file. Your  
phone bill or prepay card is debited  
when a purchase is accepted.  
To select saved channels  
1 From stand-by select Menu > Radio  
> Options > Channels.  
2 Select a radio channel.  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
43  
     
To download a music file  
When you have listened to a music file  
preview, you can agree to accept the  
conditions.  
To send a ringtone  
From stand-by select Menu > Organizer  
1
> File manager  
.
2 Scroll to Music and select Open.  
3 Scroll to a ringtone and select Options  
> Send.  
1 Select Yes to download.  
2 A text message is sent to confirm  
payment and the file is made available  
to download.  
4 Select a transfer method.  
Make sure the receiving device supports  
the transfer method you select.  
Ringtones and melodies  
To set a ringtone  
1 From stand-by select Menu > Settings  
> the Sounds & alerts tab > Ringtone.  
2 Find and select a ringtone.  
To receive a ringtone  
Follow the instructions that appear.  
You are not allowed to exchange some  
copyright-protected material. A protected  
file has a  
icon.  
To set the ringtone volume  
1 From stand-by select Menu > Settings  
> the Sounds & alerts tab > Ring  
volume.  
MusicDJ™  
You can compose and edit your  
own melodies to use as ringtones.  
A melody consists of four types of  
tracks – Drums, Basses, Chords, and  
Accents. A track contains a number  
of music blocks. The blocks consist  
of pre-arranged sounds with different  
characteristics. The blocks are  
2 press  
or  
to change the volume.  
3 Select Save.  
To turn the ringtone off  
From stand-by press and hold  
down  
.
All signals except the alarm signal  
are affected.  
grouped into Intro, Verse, Chorus,  
and Break. You compose a melody by  
adding music blocks to the tracks.  
To set the vibrating alert  
1 From stand-by select Menu > Settings  
> the Sounds & alerts tab > Vibrating  
alert.  
2 Select an option.  
44  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
           
To compose a melody  
1 From stand-by select Menu  
> Entertainment > MusicDJ™.  
2 Select to Insert, Copy or Paste  
blocks.  
In some countries or states it is required  
by law that you inform the other person  
before recording the call.  
To record a sound  
From stand-by select Menu  
> Entertainment > Record sound.  
3 Use  
,
,
or  
to scroll between  
the blocks.  
4 Select Options > Save melody.  
To listen to a recording  
1
From stand-by select Menu > Organizer  
> File manager  
To send a melody  
.
1
From stand-by select Menu > Organizer  
> File manager  
2 Scroll to Music and select Open.  
3 Scroll to a recording and select Play.  
.
2 Scroll to Music and select Open.  
3 Find and select a melody and select  
Options > Send.  
Games  
Your phone contains several games.  
You can also download games. Help  
texts are available for most games.  
4 Select a transfer method.  
Make sure the receiving device supports  
the transfer method you select.  
To start a game  
To receive a melody  
Follow the instructions that appear.  
1 From stand-by select Menu  
> Entertainment > Games.  
2 Select a game.  
You cannot send a polyphonic melody  
or MP3 file in a text message.  
To end a game  
Press  
.
Sound recorder  
You can record a voice memo or a call.  
Recorded sounds can also be set as  
ringtones.  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
45  
         
Gaming control  
The keys on your phone can be used  
for different gaming control functions.  
To set permissions for a Java  
application  
From stand-by select Menu > Organizer  
1
> Applications  
.
2 Scroll to an application and select  
Options > Permissions.  
3 Set permissions.  
Applications  
You can download and run Java  
applications. You can also view  
information or set different permissions.  
Java application screen size  
Some Java applications are designed  
for a specific screen size. For more  
information, contact the application  
vendor.  
Before you use Java™ applications  
If settings are not already entered in  
your phone, see Settings on page 47.  
To select a Java application  
From stand-by select Menu > Organizer  
To set the screen size for a Java  
application  
1
> Applications  
.
1
From stand-by select Menu > Organizer  
> Applications  
2 Select an application.  
.
To view information about a Java  
application  
2 Scroll to an application and select  
Options > Screen size.  
3 Select an option.  
1
From stand-by select Menu > Organizer  
> Applications  
.
Internet profiles for Java applications  
Some Java applications need to  
connect to the Internet to receive  
information. Most Java applications  
use the same Internet settings as  
your Web browser.  
2 Scroll to an application and select  
Options > Information.  
46  
Entertainment  
 
This is the Internet version of the User's guide. © Print only for private use.  
       
To enter a phone name  
Connectivity  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Phone name.  
2 Enter the phone name and select OK.  
Settings  
Before you synchronize with an  
Internet service, use the Internet,  
PlayNow™, My friends, Java, picture  
messaging, email and picture blog you  
need to have settings in your phone.  
Using the Internet  
You can use the Internet to access  
online services.  
If settings are not already entered,  
you can download settings using  
the set-up wizard or by going to  
To start browsing  
1 From stand-by select Menu > Internet.  
2 Select Options > Go to.  
3 Select an option.  
To download settings using  
the Set-up wizard  
1 From stand-by select Menu > Settings  
> the General tab > Setup wizard  
> Settings download.  
To exit the browser  
When you browse the Internet, select  
Options > Exit browser.  
To make a call while browsing  
2 Follow the instructions that appear.  
When you browse the Internet press  
.
Contact your network operator or  
service provider for more information.  
To save an item from a Web page  
1 When you browse the Internet, select  
an item.  
2 Select Options > Tools and save the  
item.  
To download settings using a computer  
2 Follow the instructions on the screen.  
1
To find text on a Web page  
1 When you browse the Internet, select  
Options > Tools > Find on page.  
2 Enter text and press Find.  
Phone name  
You can enter a name for your phone  
to be shown to other devices.  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
47  
           
To send a link  
Key  
Shortcut  
1 When you browse the Internet, select  
Options > Tools > Send link.  
2 Select an option.  
Bookmarks  
-
Enter text to Enter  
address, Search Internet  
or search in Bookmarks.  
Using bookmarks  
You can create and edit bookmarks as  
quick links to your favourite Web pages.  
Fullscreen or Landscape  
or Normal screen.  
To create a bookmark  
Zoom  
1 When you browse the Internet, select  
Options > Tools > Add bookmark.  
2 Enter a title and an address. Select  
Save.  
Pan & zoom (when  
Smart-Fit is off).  
Internet security and certificates  
Your phone supports secure  
browsing. Certain Internet services,  
such as banking, require certificates in  
your phone. Your phone may already  
contain certificates when you buy it or  
you can download new certificates.  
To select a bookmark  
1 From stand-by select Menu > Internet.  
2 Select Options > Go to > Bookmarks.  
3 Scroll to a bookmark and select Go to.  
Internet keypad shortcuts  
You can use the keypad to go directly  
to an Internet browser function.  
To view certificates in the phone  
From stand-by select Menu > Settings  
> the General tab > Security  
> Certificates.  
To select Internet keypad shortcuts  
1 From stand-by select Menu > Internet.  
2 Select Options > Advanced > Keypad  
mode > Shortcuts.  
Web feeds  
You can receive frequently updated  
content, such as podcasts or news  
headlines, as Web feeds. You can add  
feeds for a page, if it has the  
icon.  
48  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
       
To add new feeds for a Web page  
When you browse a page on the  
Internet that has Web feeds, select  
Options > Web feeds.  
We recommend a range within 10 metres  
(32 feet), with no solid objects in between,  
for Bluetooth communication.  
Before you use Bluetooth wireless  
technology  
You must turn on the Bluetooth  
function to communicate with other  
devices. You must also pair your  
phone with other Bluetooth devices.  
To create a new Web feed  
1 From stand-by select Menu  
> Messaging > Web feeds > Options  
> New feed.  
2 Enter the address and select Go to.  
To turn the Bluetooth function on  
From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Turn on.  
To set options for Web feeds  
1 From stand-by select Menu  
> Messaging > Web feeds.  
2 Scroll to a Web feed and select  
Options.  
Make sure that the device you want to  
pair your phone with has the Bluetooth  
function activated and is made visible.  
3 Select an option.  
To pair the phone with a device  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> My devices.  
2 Scroll to New device and select Add  
to search for available devices.  
3 Select a device.  
Bluetooth™ wireless  
technology  
The Bluetooth function makes wireless  
connection to other Bluetooth devices  
possible. You can, for example:  
Connect to handsfree devices.  
Connect to several devices at the  
same time.  
Connect to computers and access  
the Internet.  
Exchange items and play  
multiplayer games.  
4 Enter a passcode, if required.  
To allow connection to the phone  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> My devices.  
2 Select a device from the list.  
3 Select Options > Allow connection.  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
49  
     
To pair the phone with a Bluetooth  
handsfree for the first time  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree.  
To receive an item  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Visibility > Show phone.  
2 When you receive an item, follow the  
instructions that appear.  
2 Select Yes.  
3 Enter a passcode, if required.  
Transferring sound to and from  
a Bluetooth handsfree  
You can transfer the sound to and  
from a Bluetooth handsfree using  
a phone key or the handsfree key.  
To pair the phone with more than one  
Bluetooth handsfree  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree > My handsfree > New  
handsfree.  
To transfer sound  
1 From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree > Incoming call.  
2 Scroll to a device and select Add.  
Power saving  
You can save battery power with the  
Power save function. You can only  
connect with a single Bluetooth device.  
You must turn this function off if you  
want to connect with more than one  
Bluetooth device at the same time.  
2 Select an option. In phone transfers  
sound to the phone. In handsfree  
transfers sound to the handsfree.  
To transfer sound during a call  
1 During a call, select Sound > Transfer  
sound.  
To turn powersave on  
2 Select from the list.  
From stand-by select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Powersave > On.  
File transfer  
You can synchronize and transfer files  
using Bluetooth wireless technology.  
See Synchronization using a computer  
on page 52.  
Visibility  
If you want other Bluetooth devices to  
be able to discover your phone, you can  
choose to make your phone visible.  
50  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
To use media transfer and mass  
storage mode  
Using the USB cable  
You can connect your phone to  
a computer with the USB cable to  
transfer files using Mass storage  
or Media transfer. You can also  
synchronize, transfer files and use  
your phone as a modem using Phone  
mode. For more information go to  
the Getting started section at  
Before you use the USB cable  
You need one of these operating  
systems to transfer files using a USB  
cable:  
Before transferring files you must install  
the Sony Ericsson PC Suite software  
on your computer. See “To install the  
Sony Ericsson PC Suite” on page 53  
Windows® 2000  
1 Connect the USB cable to the phone  
and the computer.  
Windows XP (Pro and Home)  
Windows Vista (32 bit and 64 bit  
versions of: Ultimate, Enterprise,  
Business, Home Premium, Home  
Basic)  
2 Phone: Select Mass storage > Menu  
> Settings > the Connectivity tab  
> USB > USB mode > Mass storage.  
The phone will shut down in this mode  
and restart when disconnected from  
the USB cable.  
3 Phone: Select Media transfer and the  
phone will remain activated during file  
transfer.  
Media transfer and Mass storage  
You can drag and drop files between  
your phone or memory card and  
a computer in Microsoft Windows  
Explorer.  
4 Computer: Wait until the phone  
memory and memory card appear as  
external disks in Windows Explorer.  
5 Drag and drop selected files between  
the phone and the computer.  
Only use a USB cable supported by your  
phone. Do not remove the USB cable  
from your phone or computer during file  
transfer as this may corrupt the phone  
memory or the memory card.  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
51  
   
To disconnect the USB cable safely  
1 Right-click the removable disk icon in  
Windows Explorer.  
Synchronizing  
You can use the USB cable or  
Bluetooth wireless technology  
2 Select Eject.  
to synchronize phone contacts,  
appointments, bookmarks, tasks and  
notes with a computer program such  
as Microsoft Outlook. You can also  
synchronize with an Internet service  
using SyncML or a Microsoft®  
3 Disconnect the USB cable when the  
following message is shown in the  
phone: Mass storage session ended.  
It is now safe to remove the USB  
cable.  
Exchange Server using Exchange  
ActiveSync®. For more information  
go to the Getting started section at  
Phone mode  
Before synchronizing or using your  
phone as a modem you must install  
the Sony Ericsson PC Suite software  
on your computer. See To install the  
Sony Ericsson PC Suite on page 53.  
Use only one of the synchronization  
methods at a time with your phone.  
Synchronization using a computer  
Before synchronizing you need to  
install the Sony Ericsson PC Suite  
from the CD included with your  
phone. The software includes help  
information. You can also go to  
to download the software.  
To use phone mode  
1 Computer: Start PC Suite from Start/  
Programs/Sony Ericsson/PC Suite.  
2 Connect the USB cable to the phone  
and the computer.  
3 Phone: Select Phone mode > Menu  
> Settings > the Connectivity tab  
> USB > USB mode > Phone mode.  
4 Computer: When you are notified that  
the Sony Ericsson PC Suite has found  
your phone, you can start using the  
phone mode applications.  
You need one of these operating  
systems to use the PC Suite on your  
computer:  
Windows XP (Pro and Home)  
Windows Vista (32 bit and 64 bit  
versions of: Ultimate, Enterprise,  
Business, Home, Premium, Home  
Basic)  
For usage details, see the Sony Ericsson  
PC Suite Help section once the software  
has been installed on your computer.  
52  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
To install the Sony Ericsson PC Suite  
1 Turn on your computer and insert the  
CD. The CD starts automatically and  
the installation window opens.  
2 Select a language and click OK.  
3 Click Install Sony Ericsson PC suite  
and follow the instructions on the  
screen.  
3 Enter a name for the new account and  
select Cont.  
4 Scroll to Server address > Edit.  
Enter the required information and  
select OK.  
5 Enter Username and Password,  
if required.  
6 Select the App. settings tab and  
select an application.  
7 Select Database name and enter the  
required information.  
8 Scroll to the Advanced tab to enter  
additional settings for synchronizing.  
9 Select Save.  
Synchronization using an Internet  
service  
You can synchronize online using an  
Internet service with your phone. If  
Internet settings are not in your phone,  
see Settings on page 47.  
To delete an account  
Before you start to synchronize  
You must enter settings for SyncML  
synchronization and register a  
synchronization account online with  
a service provider. Settings that are  
required are:  
1
From stand-by select Menu > Organizer  
> Synchronization  
.
2 Scroll to an account and select Options  
> Delete.  
To start synchronization  
• Server address – server URL  
• Database name – database to  
synchronize with  
1
From stand-by select Menu > Organizer  
> Synchronization  
.
2 Scroll to an account and select Start.  
To enter settings for SyncML  
Synchronization using a  
Microsoft® Exchange Server  
1
From stand-by select Menu > Organizer  
> Synchronization  
.
You can access and synchronize  
corporate exchange information  
such as email, contacts and calendar  
entries with a Microsoft® Exchange  
Server using your phone.  
2 Scroll to New account and select Add  
> SyncML.  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
53  
To start synchronization  
From stand-by select Menu > Organizer  
For more information on synchronization  
settings, contact your IT administrator.  
1
> Synchronization  
.
Before you start to synchronize  
You must enter settings for Exchange  
ActiveSync to access a Microsoft  
Exchange Server. Settings that are  
required are:  
2 Scroll to an account and select Start.  
Update service  
You can update your phone with  
the latest software. You do not lose  
personal or phone information.  
• Server address – server URL  
• Domain – server domain  
• Username – account username  
• Password – account password  
There are two ways to update your  
phone:  
Over the air using your phone  
Using the provided USB cable and  
an Internet-connected computer  
To enter settings for Exchange  
ActiveSync  
From stand-by select Menu > Organizer  
1
Update service requires data access  
such as GPRS, 3G or HSDPA.  
> Synchronization  
.
2 Scroll to New account > and select  
Add > ActiveSync.  
3 Enter a name for the new account and  
select Cont.  
4 Enter the required settings.  
5 Scroll between the tabs to enter  
additional settings.  
Before you use the Update service  
If settings are not in your phone see  
To view the current software  
in the phone  
1 From stand-by select Menu > Settings  
> the General tab > Update service.  
2 Select Software version.  
6 Select Save.  
54  
Connectivity  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
To use Update service using  
the phone  
More features  
1 From stand-by select Menu > Settings  
> the General tab > Update service.  
2 Select Search for update and follow  
the instructions that appear.  
Location services  
You can get help to find your way, view  
information about your current location  
and save your favourite locations.  
To use Update service using  
a USB cable  
Some features of Location services use  
the Internet.  
or click the Sony Ericsson Update  
service in the PC Suite software if  
installed on your computer. See To  
install the Sony Ericsson PC Suite on  
page 53.  
Using location services  
Your phone is equipped with a GPS  
receiver that uses satellite signals to  
calculate your location. Make sure  
you have a clear view of the sky when  
using features that require the GPS  
receiver to find your location. If your  
location is not found after a few  
minutes, move to another location.  
2 Select a region and country.  
3 Follow the instructions on the screen.  
To set a reminder to use Update  
service  
1 From stand-by select Menu > Settings  
> the General tab > Update service  
> Settings > Reminder.  
To facilitate the search keep the phone  
open, stand still and do not cover the  
GPS receiver. The GPS receiver is  
placed on the left side of the keypad.  
2 Select an option.  
Assisted GPS  
With Assisted GPS (A-GPS) it takes  
less time to calculate a location.  
Contact your network operator for more  
information.  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
55  
       
Google Maps™ for mobile  
2 Enter the title and select OK.  
3 Scroll to Description: and enter the  
description. Select OK.  
4 Scroll to Position: and select Edit  
> Current position.  
Google Maps™ lets you view maps  
and satellite imagery, find addresses  
and businesses, and calculate routes.  
To search for a location  
1 From stand-by select Menu > Location  
services > Google Maps.  
2 Select Options > Find Location.  
3 Select Enter an address.  
To view a saved location  
1 From stand-by select Menu > Location  
services > My favourites.  
2 Scroll to a location and select Show  
on map.  
4 Enter the address and select OK.  
Status information  
To view satellite imagery  
When your location is found you  
can view available satellites and get  
information about your current speed  
and altitude.  
When you use Google Maps™, select  
Options > Satellite View.  
To calculate routes  
1 From stand-by select Menu > Location  
services > Google Maps.  
2 Select Options > Directions.  
3 Select Enter an address. Enter the  
start point address and select OK.  
4 Select Enter an address. Enter the  
end point address and select OK.  
Location requests  
External services may ask for your  
location.  
To change permission for external  
services  
1 From stand-by select Menu > Location  
services > Settings > Permission.  
2 Select an option.  
Save locations  
All saved locations are found in  
My favourites.  
Disable the GPS  
To save your current location  
1 From stand-by select Menu > Location  
services > My favourites > Add new  
favourite.  
To disable the GPS  
From stand-by select Menu > Location  
services > Settings > Disable GPS.  
56  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
   
To silence the alarm  
When the alarm sounds, press any key.  
To repeat the alarm, select Snooze.  
Alarms  
You can set a sound or the radio as an  
alarm signal. The alarm sounds even  
if the phone is turned off. When the  
alarm sounds you can silence it for  
9 minutes or turn it off.  
To turn off an alarm  
When the alarm sounds, select TurnOff.  
To cancel the alarm  
To set the alarm  
From stand-by select Menu > Organizer  
1
From stand-by select Menu > Organizer  
> Alarms  
1
.
> Alarms  
.
2 Scroll to an alarm and select TurnOff.  
2 Scroll to an alarm and select Edit.  
3 Scroll to Time: and select Edit.  
4 Enter a time and select OK > Save.  
The alarm in silent mode  
You can set the alarm not to sound  
when the phone is in silent mode.  
To set the recurrent alarm  
1
From stand-by select Menu > Organizer  
> Alarms  
To set an alarm to sound or not  
in silent mode  
.
1
From stand-by select Menu > Organizer  
> Alarms  
2 Scroll to an alarm and select Edit.  
3 Scroll to the tab.  
2 Scroll to an alarm and select Edit.  
3 Scroll to Recurrent: and select Edit.  
4 Scroll to a day and select Mark.  
5 To select another day, scroll to the day  
and select Mark.  
.
4 Scroll to Silent mode and select Edit.  
5 Select an option.  
6 Select Done > Save.  
To set the alarm signal  
Calendar  
1
From stand-by select Menu > Organizer  
> Alarms  
The calendar can be synchronized with  
a computer calendar, with a calendar on  
the Web or with a Microsoft® Exchange  
Server (Microsoft® Outlook®). For more  
information see Synchronizing on  
page 52.  
.
2 Scroll to an alarm and select Edit.  
3 Scroll to Alarm signal: and select Edit.  
4 Find and select an alarm signal.  
5 Select Save.  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
57  
       
Default view  
To edit an appointment  
You can choose whether month, week  
or day view will appear first when you  
open the calendar.  
1
From stand-by select Menu > Organizer  
> Calendar  
.
2 Select a date.  
3 Scroll to an appointment and select  
View.  
4 Select Options > Edit.  
5 Edit the appointment and confirm each  
entry.  
To set default view  
From stand-by select Menu > Organizer  
1
> Calendar  
.
2 Select Options > Advanced > Default  
view.  
3 Select an option.  
6 Select Save.  
To send an appointment  
Appointments  
You can add new appointments  
or reuse existing appointments.  
1
From stand-by select Menu > Organizer  
> Calendar  
.
2 Select a date.  
To add an appointment  
3 Scroll to an appointment and select  
Options > Send.  
4 Select a transfer method.  
1
From stand-by select Menu > Organizer  
> Calendar  
.
2 Select a date.  
3 Scroll to New appointment and select  
Add.  
Make sure the receiving device supports  
the transfer method you select.  
4 Enter the information and confirm  
each entry.  
5 Select Save.  
To view a calendar week  
1
From stand-by select Menu > Organizer  
> Calendar  
.
2 Select a date.  
3 Select Options > View week.  
To view an appointment  
1
From stand-by select Menu > Organizer  
> Calendar  
.
To set when reminders should sound  
2 Select a date.  
3 Scroll to an appointment and select  
View.  
1
From stand-by select Menu > Organizer  
> Calendar  
2 Select a date.  
.
58  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
     
3 Select Options > Advanced  
> Reminders.  
To send a task  
From stand-by select Menu > Organizer  
1
4 Select an option.  
> Tasks.  
2 Scroll to a task and select Options  
> Send.  
3 Select a transfer method.  
A reminders option set in calendar  
affects a reminders option set in tasks.  
Tasks  
Make sure the receiving device supports  
the transfer method you select.  
You can add new tasks or reuse  
existing tasks.  
To set when reminders should sound  
1
From stand-by select Menu > Organizer  
> Tasks  
To add a task  
.
1
From stand-by select Menu > Organizer  
> Tasks  
2 Scroll to a task and select Options  
> Reminders.  
3 Select an option.  
.
2 Scroll to New task and select Add.  
3 Select an option.  
4 Enter details and confirm each entry.  
A reminders option set in tasks affects  
a reminders option set in calendar.  
To view a task  
Notes  
1
From stand-by select Menu > Organizer  
> Tasks  
.
You can make notes and save them.  
You can also show a note in standby.  
2 Scroll to a task and select View.  
To add a note  
To reuse an existing task  
1
From stand-by select Menu > Organizer  
> Notes  
1
From stand-by select Menu > Organizer  
> Tasks  
.
.
2 Select New note > Add.  
3 Write a note and select Save.  
2 Scroll to a task and select View.  
3 Select Options > Edit.  
4 Edit the task and select Cont.  
5 Choose to set a reminder.  
To show a note in standby  
1
From stand-by select Menu > Organizer  
> Notes  
.
2 Scroll to a note and select Options  
> Show in standby.  
More features  
59  
 
This is the Internet version of the User's guide. © Print only for private use.  
       
To send a note  
From stand-by select Menu > Organizer  
Code memo  
1
You can save security codes, for  
> Notes  
.
example, for credit cards. You must set  
a passcode to open the code memo.  
2 Scroll to a note and select Options  
> Send.  
3 Select a transfer method.  
Checkword  
The checkword confirms that you  
have entered the correct passcode.  
If the passcode is correct, the correct  
codes are shown. If the passcode is  
incorrect, the checkword and the  
codes shown are also incorrect.  
Make sure the receiving device supports  
the transfer method you select.  
To use an item in a note  
1 When you view the note, select a  
phone number, email or Web address.  
2 Select Options > Use.  
To open code memo for the first time  
3 Select an option.  
1
From stand-by select Menu > Organizer  
> Code memo  
.
Timer, stopwatch and  
calculator  
2 Follow the instructions that appear  
and select Cont.  
3 Enter a passcode and select Cont.  
4 Confirm the passcode and select  
Cont.  
To use the timer  
1
From stand-by select Menu > Organizer  
> Timer  
.
5 Enter a checkword and select Done.  
2 Enter the hours, minutes and seconds.  
3 Select Start.  
To add a code  
1
From stand-by select Menu > Organizer  
> Code memo  
To use the stopwatch  
.
1
From stand-by select Menu > Organizer  
> Stopwatch > Start  
2 Enter a passcode and select Cont.  
3 Scroll to New code and select Add.  
4 Enter a name associated with the  
code and select Cont.  
.
2 To view a new lap time, select Lap.  
To use the calculator  
1
From stand-by select Menu > Organizer  
> Calculator  
2 Press or  
5 Enter the code and select Done.  
.
to select ÷ x - + . % =.  
60  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
                 
To change a passcode  
From stand-by select Menu > Organizer  
Profiles  
1
Profiles automatically adapt some  
phone settings to different situations,  
for example, the ring volume may be  
adapted to suit a meeting or an  
accessory. You can reset all profiles to  
how they were set when you purchased  
your phone.  
> Code memo  
.
2 Enter a passcode and select Options  
> Change passcode.  
3 Enter your new passcode and select  
Cont.  
4 Re-enter the new passcode and select  
Cont.  
5 Enter a checkword and select Done.  
To select a profile  
1 From stand-by select Menu > Settings  
> the General tab > Profiles.  
2 Select a profile.  
Forget your passcode?  
If you forget your passcode, you must  
reset the code memo. This means  
that all entries in the code memo are  
deleted. The next time you enter the  
code memo, you must proceed as if  
you are opening it for the first time.  
To view and edit a profile  
1 From stand-by select Menu > Settings  
> the General tab > Profiles.  
2 Scroll to a profile and select Options  
> View and edit.  
You cannot rename the Normal profile.  
To reset code memo  
To reset all profiles  
1 From stand-by select Menu > Settings  
> the General tab > Profiles.  
1
From stand-by select Menu > Organizer  
> Code memo  
.
2 Enter any passcode to access the code  
memo. The checkword and codes that  
are then shown are incorrect.  
3 Select Options > Reset.  
4 Reset code memo? appears.  
5 Select Yes.  
2 Select Options > Reset profiles.  
Time and date  
To set the time  
1 From stand-by select Menu > Settings  
> the General tab > Time & date  
> Time.  
2 Enter the time and select Save.  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
61  
       
To set the date  
To unblock the SIM card  
1 When PIN blocked appears, enter  
your PUK and select OK.  
2 Enter a new four-to-eight-digit PIN  
and select OK.  
1 From stand-by select Menu > Settings  
> the General tab > Time & date  
> Date.  
2 Enter the date and select Save.  
3 Re-enter the new PIN and select OK.  
To set the time zone  
1 From stand-by select Menu > Settings  
> the General tab > Time & date > My  
time zone.  
To edit the PIN  
1 From stand-by select Menu > Settings  
> the General tab > Security > Locks  
> SIM protection > Change PIN.  
2 Enter your PIN and select OK.  
3 Enter a new four-to-eight-digit PIN  
and select OK.  
2 Select the time zone you are in by city.  
If you select a city, My time zone also  
updates the time when daylight saving  
time changes.  
4 Re-enter the new PIN and select OK.  
Locks  
If Codes do not match appears, you  
entered the new PIN incorrectly.  
If Wrong PIN appears, followed by  
Old PIN:, you entered your old PIN  
incorrectly.  
SIM card lock  
This lock only protects your subscription.  
Your phone will work with a new SIM  
card. If the lock is on, you have to enter  
a PIN (Personal Identity Number).  
To use the SIM card lock  
1 From stand-by select Menu > Settings  
> the General tab > Security > Locks  
> SIM protection > Protection.  
2 Select an option.  
If you enter your PIN incorrectly three  
times in a row, the SIM card is blocked  
and you need to enter your PUK  
(Personal Unblocking Key). Your PIN  
and PUK are supplied by your network  
operator.  
3 Enter your PIN and select OK.  
Phone lock  
You can stop unauthorized use of  
your phone. Change the phone lock  
code (0000) to any four-to-eight-digit  
personal code.  
62  
More features  
 
This is the Internet version of the User's guide. © Print only for private use.  
               
It is important that you remember your  
new code. If you forget it, you have to take  
your phone to your local Sony Ericsson  
retailer.  
Troubleshooting  
Some problems will require you  
to call your network operator.  
For more support go to  
To use the phone lock  
1 From stand-by select Menu > Settings  
> the General tab > Security > Locks  
> Phone protection > Protection.  
2 Select an option.  
3 Enter the phone lock code and  
select OK.  
Common questions  
I have problems with memory  
capacity or the phone is working  
slowly  
Restart your phone every day to free  
memory or do a Master reset.  
To unlock the phone  
Enter your code and select OK.  
Master reset  
To change the phone lock code  
1 From stand-by select Menu > Settings  
> the General tab > Security > Locks  
> Phone protection > Change code.  
2 Enter the old code and select OK.  
3 Enter the new code and select OK.  
4 Repeat the code and select OK.  
If you select Reset settings, the  
changes that you have made to  
settings will be deleted.  
If you select Reset all, in addition to  
your changes to settings, all contacts,  
messages, personal data, and content  
that you have downloaded, received  
or edited will also be deleted.  
IMEI number  
Keep a copy of your IMEI (International  
Mobile Equipment Identity) number in  
case your phone is stolen.  
To reset the phone  
1 From stand-by select Menu > Settings  
> the General tab > Master reset.  
2 Select an option.  
To view your IMEI number  
3 Follow the instructions that appear.  
From stand-by press  
,
,
,
,
.
Troubleshooting  
 
This is the Internet version of the User's guide. © Print only for private use.  
63  
         
I cannot charge the phone or battery  
capacity is low  
The charger is not properly connected or  
the battery connection is poor. Remove  
the battery and clean the connectors.  
order settings and follow the instructions  
on the screen See Settings on page 47.  
.
How do I turn on and off T9  
Text Input when writing?  
When you enter text, press and hold  
The battery is worn out and needs to  
be replaced. See Charging the battery  
on page 7.  
down  
. You will see  
at the top  
of the screen when T9 Text Input is  
activated.  
No battery icon appears when I start  
charging the phone  
It may take a few minutes before the  
battery icon appears on the screen.  
How do I change phone language?  
1 From stand-by select Menu > Settings  
> the General tab > Language  
> Phone language.  
Some menu options appear in grey  
A service is not activated. Contact  
your network operator.  
2 Select an option.  
I cannot use the Internet  
I cannot use SMS/text messages  
on my phone  
Settings are missing or incorrect.  
Contact your network operator to find  
out the correct SMS service centre  
setting. See Text messages on page 28.  
Your subscription does not include  
data capability. Internet settings are  
missing or incorrect. Please contact  
your network operator.  
See Help in your phone on page 7 or  
to order Internet settings, and follow  
the instructions on the screen. See  
I cannot use picture messages  
on my phone  
Your subscription does not include  
data capability. Settings are missing  
or incorrect. Please contact your  
network operator.  
64  
Troubleshooting  
 
This is the Internet version of the User's guide. © Print only for private use.  
The phone cannot be detected  
by other devices using Bluetooth  
wireless technology  
You have not turned the Bluetooth  
function on.  
Insert correct SIM card  
Your phone is set to work only with  
certain SIM cards. Check if you are  
using the correct operator SIM card.  
Wrong PIN/Wrong PIN2  
You have entered your PIN or PIN2  
incorrectly.  
Make sure that the visibility is set to  
show phone. See To receive an item  
on page 50.  
Enter the correct PIN or PIN2 and  
on page 5.  
I cannot synchronize or transfer data  
between my phone and my computer,  
when using the USB cable.  
The cable or software that came  
with your phone has not been  
properly installed. Go to  
read Getting started guides which  
contain detailed installation instructions  
and troubleshooting guides.  
PIN blocked/PIN2 blocked  
You have entered your PIN or PIN2  
code incorrectly three times in a row.  
To unblock, see SIM card lock on  
page 62.  
Codes do not match  
Codes that you have entered do not  
match. When you want to change a  
security code, for example your PIN,  
you have to confirm the new code.  
See SIM card lock on page 62.  
Error messages  
Insert SIM  
There is no SIM card in your phone or  
you may have inserted it incorrectly.  
No netw. coverage  
Your phone is in flight mode. See  
Flight mode on page 6.  
The SIM card connectors need  
cleaning. If the card is damaged,  
contact your network operator.  
Troubleshooting  
 
This is the Internet version of the User's guide. © Print only for private use.  
65  
 
Your phone is not receiving any network  
signal, or the received signal is too  
weak. Contact your network operator  
and make sure that the network has  
coverage where you are.  
Important information  
Sony Ericsson Consumer Web site  
section where help and tips are only a few clicks  
away. Here you will find the latest computer  
software updates and tips on how to use your  
product more efficiently.  
The SIM card is not working properly.  
Insert your SIM card in another phone.  
If this works, it is probably your phone  
that is causing the problem. Please  
contact the nearest Sony Ericsson  
service location.  
Service and support  
From now on you will have access to a portfolio  
of exclusive service advantages such as:  
Global and local Web sites providing support.  
A global network of Call Centers.  
An extensive network of Sony Ericsson service  
partners.  
A warranty period. Learn more about the warranty  
conditions in this User guide.  
On www.sonyericsson.com, under the support  
section in the language of your choice, you will find  
the latest support tools and information, such as  
software updates, Knowledge base, phone set-up  
and additional help when you require it.  
Emerg. calls only  
You are within range of a network,  
but you are not allowed to use it.  
However, in an emergency, some  
network operators allow you to call the  
international emergency number 112.  
For operator-specific services and features, please  
contact your network operator for more information.  
PUK blocked. Contact operator.  
You entered your personal unblocking  
key code (PUK) incorrectly 10 times in  
a row.  
You can also contact our Call Centers. See the  
phone number for the nearest Call Center in the list  
below. If your country/region is not represented in  
the list, please contact your local dealer. (The phone  
numbers below were correct at the time of going to  
print. On www.sonyericsson.com you can always  
find the latest updates.  
Charging, alien battery  
The battery that you are using is not  
a Sony Ericsson-approved battery.  
See Battery on page 69.  
In the unlikely event that your product needs  
service please contact the dealer from whom it  
was purchased or one of our service partners.  
Save your original proof of purchase, you will  
need it if you need to claim warranty.  
For a call to one of our Call Centers you will be  
charged according to national tariffs, including local  
taxes, unless the phone number is a toll-free number.  
66  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
 
Support  
Argentina  
Australia  
Belgique/België  
Brasil  
Canada  
Central Africa  
Chile  
Colombia  
Česká republika  
Danmark  
800-333-7427  
1-300650-600  
02-7451611  
4001-04444  
1-866-766-9374  
+27 112589023  
123-0020-0656  
18009122135  
844550 055  
33 31 28 28  
0180 534 2020  
801-11-810-810  
210-89 91 919  
Deutschland  
Ελλάδα  
España  
France  
902 180 576  
0 825 383 383  
8203 8863  
062 000 000  
39011111  
021-2701388  
1850 545 888  
06 48895206  
8 70055030  
+36 1 880 4747  
1-800-889900  
01 800 000 4722  
0900 899 8318  
0800-100150  
815 00 840  
Hong Kong/  
Hrvatska  
India/Hkkjr  
Indonesia  
Ireland  
Italia  
Lietuva  
Magyarország  
Malaysia  
México  
Nederland  
New Zealand  
Norge  
Österreich  
Pakistan  
0810 200245  
111 22 55 73  
(92-21) 111 22 55 73  
Philippines/Pilipinas  
Polska  
Portugal  
România  
Россия  
02-6351860  
0 (prefiks) 22 6916200  
808 204 466  
(+4021) 401 0401  
8 (495) 787 0986  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
67  
 
Schweiz/Suisse/Svizzera  
Singapore  
Slovensko  
South Africa  
Suomi  
Sverige  
Türkiye  
Україна  
United Kingdom  
United States  
Venezuela  
ꢀWꢁóꢂ&ꢀMóEꢃY<ꢄꢀž›¥Kꢅx›  
0848 824 040  
67440733  
02-5443 6443  
0861 6322222  
09-299 2000  
013-24 45 00  
0212 47 37 777  
(+0380) 44 590 1515  
08705 23 7237  
1-866-7669347  
0-800-100-2250  
43 919880  
4008100000  
02-25625511  
02-2483030  
Åš¥  
Do not expose your product to liquid or moisture  
or humidity.  
Do not expose your product to  
extreme high or low temperatures.  
Do not expose the battery to  
Guidelines for Safe  
and Efficient Use  
Please read this information before  
using your phone.  
temperatures above +60°C (+140°F).  
Do not expose your product to open  
flames or lit tobacco products.  
Do not drop, throw or try to bend your product.  
Do not paint your product.  
Do not attempt to disassemble  
or modify your product. Only  
Sony Ericsson authorized personnel  
should perform service.  
Do not use your product near medical  
equipment without requesting  
permission from your treating physician  
or authorized medical staff.  
Do not use your product when in, or around aircraft,  
or areas showing the sign “turn off two-way radio”.  
These instructions are intended for  
your safety. Please follow these  
guidelines. If the product has been  
subject to any of the conditions listed  
below or you have any doubt as to its proper  
function make sure you have the product checked  
by a certified service partner before charging or  
using it. Failure to do so might entail a risk of  
product malfunction or even a potential hazard to  
your health.  
Recommendations for safe use of  
product (phone, battery, charger  
and other accessories)  
Always treat your product with care and keep it in  
a clean and dust-free place.  
Warning! May explode if disposed of in fire.  
68  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
   
Do not use your product in an  
area where a potentially explosive  
atmosphere exists.  
Do not place your product or install  
wireless equipment in the area above  
an air bag in your car.  
Caution: Cracked or broken displays may create  
sharp edges or splinters that could be harmful upon  
contact.  
Battery  
We recommend that you fully charge the battery  
before you use your phone for the first time. A  
new battery or one that has not been used for  
a long time could have reduced capacity the first  
few times it is used. The battery should only be  
charged in temperatures between +5°C (+41°F)  
and +45°C (+113°F).  
Use only Sony Ericsson branded original batteries  
intended for use with your phone. Using other  
batteries and chargers could be dangerous.  
Talk and standby times depend on several different  
conditions such as signal strength, operating  
temperature, application usage patterns, features  
selected and voice or data transmissions when the  
phone is being used.  
Turn off your phone before removing the battery.  
Do not put the battery into your mouth. Battery  
electrolytes may be toxic if swallowed. Do not let  
the metal contacts on the battery touch another  
metal object. Doing this could short-circuit and  
damage the battery. Use the battery for the  
intended purpose only.  
CHILDREN  
KEEP OUT OF CHILDRENS REACH.  
DO NOT ALLOW CHILDREN TO  
PLAY WITH YOUR PHONE OR ITS  
ACCESSORIES. THEY COULD HURT  
THEMSELVES OR OTHERS, OR COULD  
ACCIDENTALLY DAMAGE THE PHONE OR  
ACCESSORY. YOUR PHONE OR ITS ACCESSORY  
MAY CONTAIN SMALL PARTS THAT COULD  
BECOME DETACHED AND CREATE A CHOKING  
HAZARD.  
Power supply (Charger)  
Connect the AC power adapter only to designated  
power sources as marked on the product. Make  
sure the cord is positioned so that it will not be  
subjected to damage or stress. To reduce risk of  
electric shock, unplug the unit from any power  
source before attempting to clean it. The AC power  
adapter must not be used outdoors or in damp  
areas. Never alter the cord or plug. If the plug does  
not fit into the outlet, have a proper outlet installed  
by a qualified electrician.  
Personal medical devices  
Phones may affect the operation of pacemakers  
and other implanted equipment. Please avoid  
placing the phone over the pacemaker, for  
example, in your breast pocket. When using the  
phone, use it at the ear on the opposite side of the  
body to the pacemaker. If a minimum distance of  
15 cm (6 inches) is kept between the phone and  
the pacemaker, the risk of interference is limited.  
If you have any reason to suspect that interference  
is taking place, immediately turn off your phone.  
Contact your cardiologist for more information.  
Use only Sony Ericsson branded original chargers  
intended for use with your phone. Other chargers  
may not be designed to the same safety and  
performance standards.  
For other medical devices, please consult your  
physician and the manufacturer of the device.  
Important information  
 
This is the Internet version of the User's guide. © Print only for private use.  
69  
 
Driving  
Radio frequency (RF) exposure  
and Specific Absorption Rate (SAR)  
Please check if local laws and regulations restrict  
the use of phones while driving or require drivers  
to use handsfree solutions. We recommend that  
you use only Sony Ericsson handsfree solutions  
intended for use with your product.  
Your phone is a low-power radio transmitter and  
receiver. When it is turned on, it emits low levels of  
radio frequency energy (also known as radio waves  
or radio frequency fields).  
Please note that because of possible interference to  
electronic equipment, some vehicle manufacturers  
forbid the use of phones in their vehicles unless  
a handsfree kit with an external antenna has been  
installed.  
Always pay full attention to driving and pull off the  
road and park before making or answering a call if  
driving conditions so require.  
Governments around the world have adopted  
comprehensive international safety guidelines,  
developed by scientific organizations, for example,  
ICNIRP (International Commission on Non-Ionizing  
Radiation Protection) and IEEE (The Institute of  
Electrical and Electronics Engineers Inc.), through  
periodic and thorough evaluation of scientific  
studies. These guidelines establish permitted levels  
of radio wave exposure for the general population.  
The levels include a safety margin designed to  
assure the safety of all persons, regardless of age  
and health, and to account for any variations in  
measurements.  
Specific Absorption Rate (SAR) is the unit of  
measurement for the amount of radio frequency  
energy absorbed by the body when using a phone.  
The SAR value is determined at the highest certified  
power level in laboratory conditions, but the actual  
SAR level of the phone while it is operating can be  
well below this value. This is because the phone is  
designed to use the minimum power required to  
reach the network.  
Variations in SAR below the radio frequency  
exposure guidelines do not mean that there are  
variations in safety. While there may be differences  
in SAR levels among phones, all Sony Ericsson  
phone models are designed to meet radio frequency  
exposure guidelines.  
For phones sold in the US, before a phone model is  
available for sale to the public, it must be tested and  
certified by the Federal Communications Commission  
(FCC) that it does not exceed the limit established  
by the government-adopted requirement for safe  
exposure. The tests are performed in positions and  
locations (that is, at the ear and worn on the body) as  
Emergency calls  
Phones operate using radio signals, which cannot  
guarantee connection in all conditions. You should  
therefore never rely solely upon any phone for  
essential communications (for example, medical  
emergencies).  
Emergency calls may not be possible in all areas,  
on all cellular networks, or when certain network  
services and/or phone features are in use. Check  
with your local service provider.  
Antenna  
This phone contains a built-in antenna. Use of  
antenna devices not marketed by Sony Ericsson  
specifically for this model could damage your  
phone, reduce performance, and produce SAR  
levels above the established limits (see below).  
Efficient use  
Hold your phone as you would any other phone. Do  
not cover the top of the phone when it is in use, as  
this affects call quality and may cause the phone to  
operate at a higher power level than needed, thus  
shortening talk and standby times.  
70  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
required by the FCC for each model. For body-worn  
operation, this phone has been tested and meets  
FCC RF exposure guidelines when the handset is  
positioned a minimum of 15 mm from the body  
without any metal parts in the vicinity of the phone or  
when used with the original Sony Ericsson accessory  
intended for this phone and worn on the body. Use of  
other accessories may not ensure compliance with  
FCC RF exposure guidelines.  
please contact your local city office, your  
household waste disposal service or the shop  
where you purchased the product.  
Disposing of the battery  
Please check local regulations for  
disposal of batteries or call your  
local Sony Ericsson Call Center for  
information.  
A separate leaflet with SAR information about  
this phone model is included with the material  
accompanying this phone. This information can  
also be found, together with more information  
on radio frequency exposure and SAR, on:  
The battery should never be placed in municipal  
waste. Use a battery disposal facility if available.  
Memory card  
Your product comes complete with a removable  
memory card. It is generally compatible with the  
handset purchased but may not be compatible with  
other devices or the capabilities of their memory  
cards. Check other devices for compatibility before  
purchase or use.  
Accessible Solutions/Special Needs  
For phones sold in the US, you can use your  
TTY terminal with your Sony Ericsson phone  
(with the necessary accessory). For information on  
Accessible Solutions for individuals with special  
needs call the Sony Ericsson Special Needs Centre  
on 877 878 1996 (TTY) or 877 207 2056 (voice), or  
visit the Sony Ericsson Special Needs Centre at  
The memory card is formatted prior to shipping.  
To reformat the memory card, use a compatible  
device. Do not use the standard operating system  
format when formatting the memory card on a PC.  
For details, refer to the operating instructions of  
the device or contact customer support.  
Disposal of old electrical  
and electronic equipment  
WARNING:  
If your device requires an adapter for insertion into  
the handset or another device, do not insert the  
card directly without the required adapter.  
This symbol indicates that all  
electrical and electronic equipment  
included shall not be treated as  
Precautions on Memory Card Use  
Do not expose the memory card to moisture.  
Do not touch terminal connections with your hand  
or any metal object.  
Do not strike, bend, or drop the memory card.  
Do not attempt to disassemble or modify the  
memory card.  
Do not use or store the memory card in humid or  
corrosive locations or in excessive heat such as  
a closed car in summer, in direct sunlight or near  
a heater, etc.  
household waste. Instead it shall be left at the  
appropriate collection point for recycling of  
electrical and electronic equipment. By ensuring  
this product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product. The recycling of materials  
will help to conserve natural resources. For more  
detailed information about recycling this product,  
Important information  
 
This is the Internet version of the User's guide. © Print only for private use.  
71  
Do not press or bend the end of the memory card  
adapter with excessive force.  
Do not let dirt, dust, or foreign objects get into the  
insert port of any memory card adapter.  
Check you have inserted the memory card  
correctly.  
Insert the memory card as far as it will go into any  
memory card adapter needed. The memory card  
may not operate properly unless fully inserted.  
We recommend that you make a backup copy of  
important data. We are not responsible for any loss  
or damage to content you store on the memory card.  
Recorded data may be damaged or lost when you  
remove the memory card or memory card adapter,  
turn off the power while formatting, reading or  
writing data, or use the memory card in locations  
subject to static electricity or high electrical field  
emissions.  
LOUDNESS WARNING:  
Please adjust the audio volume cautiously when using  
third-party audio accessories to avoid volume levels  
that may be harmful to your hearing. Sony Ericsson  
does not test use of third-party audio accessories  
with this phone. Sony Ericsson recommends using  
only Sony Ericsson original audio accessories.  
End User Licence Agreement  
This wireless device, including without limitation  
any media delivered with the device, (“Device”)  
contains software owned by Sony Ericsson Mobile  
Communications AB and its affiliated companies  
(“Sony Ericsson”) and its third party suppliers and  
licensors (“Software”).  
As user of this Device, Sony Ericsson grants you a  
non-exclusive, non-transferable, non-assignable  
licence to use the Software solely in conjunction  
with the Device on which it is installed and/or  
delivered with. Nothing herein shall be construed  
as a sale of the Software to a user of this Device.  
You shall not reproduce, modify, distribute, reverse  
engineer, decompile, otherwise alter or use any  
other means to discover the source code of the  
Software or any component of the Software. For  
avoidance of doubt, you are at all times entitled to  
transfer all rights and obligations to the Software  
to a third party, solely together with the Device with  
which you received the Software, provided always  
that such third party agrees in writing to be bound  
by these rules.  
You are granted this licence for a term of the useful  
life of this Device. You can terminate this licence by  
transferring all your rights to the Device on which  
you have received the Software to a third party in  
writing. If you fail to comply with any of the terms  
and conditions set out in this licence, it will terminate  
with immediate effect.  
Sony Ericsson and its third party suppliers and  
licensors are the sole and exclusive owner of  
and retain all rights, title and interest in and to  
Protection of personal information  
To safeguard your privacy and prevent information  
being accessible to a third party, you should erase  
all personal data before selling or disposing of the  
product. To delete personal data, perform a master  
reset and remove the memory card. DELETION  
OF MATERIAL FROM THE PHONE MEMORY  
DOES NOT ENSURE THAT SAID INFORMATION  
CANNOT BE RECOVERED BY A SUBSEQUENT  
USER. SONY ERICSSON DOES NOT WARRANT  
AGAINST A SUBSEQUENT USER OF THE  
DEVICE ACCESSING YOUR INFORMATION  
AND DOES NOT ASSUME ANY RESPONSIBILITY  
FOR SUBSEQUENT DISCLOSURE OF SAID  
INFORMATION EVEN IF A MASTER RESET HAS  
BEEN PERFORMED. If you are concerned about  
such potential disclosure retain your device or  
secure its permanent destruction.  
Accessories  
Sony Ericsson recommends use of Sony Ericsson  
original accessories for safe and efficient use of  
its products. Use of third-party accessories may  
decrease performance or pose a risk to your health  
or safety.  
72  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
 
the Software. Sony Ericsson, and, to the extent  
that the Software contains material or code of a  
third party, such third party, shall be entitled third  
party beneficiaries of these terms.  
The validity, construction and performance of this  
licence shall be governed by the laws of Sweden.  
The foregoing shall apply to the full extent permitted  
by, when applicable, statutory consumer rights.  
purchased the Product, will, at their option, either  
repair or replace the Product in accordance with  
the terms and conditions stipulated herein.  
Sony Ericsson and its service partners reserve the  
right to charge a handling fee if a returned Product  
is found not to be under warranty according to the  
conditions below.  
Please note that some of your personal settings,  
downloads and other information may be lost when  
your Sony Ericsson Product is repaired or replaced.  
At present Sony Ericsson may be prevented by  
applicable law, other regulations or technical  
restrictions from making a backup copy of certain  
downloads. Sony Ericsson does not take any  
responsibility for any lost information of any  
kind and will not reimburse you for any such loss.  
You should always make backup copies of all the  
information stored on your Sony Ericsson Product  
such as downloads, calendar and contacts before  
handing in your Sony Ericsson Product for repair or  
replacement.  
Limited Warranty  
Sony Ericsson Mobile Communications AB, SE-221  
88 Lund, Sweden, (Sony Ericsson) or its local affiliated  
company, provides this Limited Warranty for your  
mobile phone, original accessory delivered with your  
mobile phone, and/or your mobile computing product  
(hereinafter referred to as “Product”).  
Should your Product need warranty service,  
please return it to the dealer from whom it was  
purchased, or contact your local Sony Ericsson  
Call Center (national rates may apply) or visit  
www.sonyericsson.com for further information.  
Our warranty  
Conditions  
Subject to the conditions of this Limited Warranty,  
Sony Ericsson warrants this Product to be free from  
defects in design, material and workmanship at the  
time of its original purchase by a consumer. This  
Limited Warranty will last for a period of two (2)  
years as from the original date of purchase of the  
Product for your mobile phone, and for a period of  
one (1) year following the original purchase date of  
the Product for all original accessories (such as the  
battery, charger or handsfree kit) which may be  
delivered with your mobile phone.  
1
2
This Limited Warranty is valid only if the original  
proof of purchase for this Product issued by a  
Sony Ericsson authorized dealer specifying the  
date of purchase and serial number**, is presented  
with the Product to be repaired or replaced.  
Sony Ericsson reserves the right to refuse warranty  
service if this information has been removed  
or changed after the original purchase of the  
Product from the dealer.  
If Sony Ericsson repairs or replaces the Product,  
the repair for the defect concerned, or the replaced  
Product shall be warranted for the remaining time  
of the original warranty period or for ninety (90)  
days from the date of repair, whichever is longer.  
Repair or replacement may involve the use of  
functionally equivalent reconditioned units.  
Replaced parts or components will become the  
property of Sony Ericsson.  
What we will do  
If, during the warranty period, this Product fails to  
operate under normal use and service, due to  
defects in design, materials or workmanship,  
Sony Ericsson authorized distributors or service  
partners, in the country/region* where you  
Important information  
 
This is the Internet version of the User's guide. © Print only for private use.  
73  
   
3
This warranty does not cover any failure of the  
Product due to normal tear and wear, or due to  
misuse, including but not limited to use in other  
than the normal and customary manner, in  
accordance with the Sony Ericsson instructions  
for use and maintenance of the Product. Nor does  
this warranty cover any failure of the Product due  
to accident, software or hardware modification or  
adjustment, acts of God or damage resulting from  
liquid.  
A rechargeable battery can be charged and  
discharged more than a hundred times. However,  
it will eventually wear out – this is not a defect and  
corresponds to normal wear and tear. When the talk  
time or standby time is noticeably shorter, it is time  
to replace your battery. Sony Ericsson recommends  
that you use only batteries and chargers approved  
by Sony Ericsson.  
Minor variations in display brightness and color  
may occur between the phones. There may be  
small, bright or dark dots on the display. These are  
called defective pixels and occur when individual  
dots have malfunctioned and cannot be adjusted.  
Two defective pixels are deemed acceptable.  
Minor variations in camera image appearance may  
occur between phones. This is not uncommon and  
is not regarded as a defective camera module.  
Since the cellular system on which the Product is  
to operate is provided by a carrier independent  
from Sony Ericsson, Sony Ericsson will not be  
responsible for the operation, availability, coverage,  
services or range of that system.  
This warranty does not cover Product failures  
caused by installations, modifications, or repair  
or opening of the Product performed by a non-  
Sony Ericsson authorised person.  
The warranty does not cover Product failures which  
have been caused by use of accessories or other  
peripheral devices which are not Sony Ericsson  
branded original accessories intended for use with  
the Product.  
Sony Ericsson disclaims any and all warranties,  
whether express or implied, for failures caused to the  
Product or peripheral devices as a result of viruses,  
trojans horses, spyware, or other malicious software.  
Sony Ericsson strongly recommends that you install  
appropriate virus protection software on your  
Product and any peripheral devices connected to it,  
as available, and update it regularly, to better protect  
your device. It is understood, however, that such  
software will never fully protect your Product or its  
peripheral devices and Sony Ericsson disclaims all  
warranties, whether express or implied, in case of  
failure by such antivirus software to fulfill its intended  
purpose.  
7
8
Tampering with any of the seals on the Product will  
void the warranty.  
THERE ARE NO EXPRESS WARRANTIES,  
WHETHER WRITTEN OR ORAL, OTHER THAN  
THIS PRINTED LIMITED WARRANTY. ALL  
IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO  
THE DURATION OF THIS LIMITED WARRANTY.  
IN NO EVENT SHALL SONY ERICSSON OR ITS  
LICENSORS BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE  
WHATSOEVER, INCLUDING BUT NOT LIMITED  
TO LOST PROFITS OR COMMERCIAL LOSS; TO  
THE FULL EXTENT THOSE DAMAGES CAN BE  
DISCLAIMED BY LAW.  
Some countries/states do not allow the exclusion or  
limitation of incidental or consequential damages, or  
limitation of the duration of implied warranties, so  
the preceding limitations or exclusions may not  
apply to you.  
The warranty provided does not affect the consumer’s  
statutory rights under applicable legislation in force,  
nor the consumer’s rights against the dealer arising  
from their sales / purchase contract.  
4
5
6
74  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
* GEOGRAPHICAL SCOPE OF THE  
WARRANTY  
Declaration of Conformity  
for Z750i  
If you have purchased your Product in a country  
member of the European Economic Area (EEA) or  
in Switzerland or the Republic of Turkey, and such  
Product was intended for sale in the EEA or in  
Switzerland or in Turkey, you can have your Product  
serviced in any EEA country or in Switzerland or in  
Turkey, under the warranty conditions prevailing in the  
country in which you require servicing of the Product,  
provided that an identical Product is sold in such  
country by an authorised Sony Ericsson distributor.  
To find out if your Product is sold in the country you  
are in, please call the local Sony Ericsson Call Center.  
Please observe that certain services may not be  
possible elsewhere than in the country of original  
purchase due, for example, to the fact that your  
Product may have an interior or exterior which is  
different from equivalent models sold in other  
countries. In addition, please note that it may  
sometimes not be possible to repair SIM-locked  
Products.  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our  
product  
Sony Ericsson type AAD-3252022-BV  
and in combination with our accessories, to  
which this declaration relates is in conformity  
with the appropriate standards 3GPP TS 51.010-1,  
EN 301908-1, EN 301489-7, EN 301489-24,  
EN 300328, EN 301489-17 and EN 60950,  
following the provisions of, Radio Equipment and  
Telecommunication Terminal Equipment directive  
99/5/EC with requirements covering EMC directive  
89/336/EEC, and Low Voltage directive  
73/23/EEC.  
Lund, July 2007  
** In some countries/regions additional information  
(such as a valid warranty card) may be requested.  
FCC Statement  
This device complies with Part 15 of  
the FCC rules. Operation is subject to  
the following two conditions:  
(1) This device may not cause  
harmful interference, and  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
Shoji Nemoto,  
Head of Product Business Group GSM/UMT  
S
We fulfil the requirements of the R&TTE Directive  
(99/5/EC).  
Important information  
 
This is the Internet version of the User's guide. © Print only for private use.  
75  
     
Index  
calls  
A
camera  
contacts  
B
battery  
C
D
E
76  
Index  
 
This is the Internet version of the User's guide. © Print only for private use.  
 
F
L
G
lock  
M
H
messages  
I
Internet  
J
K
Index  
 
This is the Internet version of the User's guide. © Print only for private use.  
77  
N
settings  
P
SIM card  
PIN code  
T
R
S
sending  
78  
Index  
 
This is the Internet version of the User's guide. © Print only for private use.  

Shure Headphones 527C User Manual
Shure Musical Instrument Amplifier WL93 User Manual
SIIG Computer Hardware 04 0743A User Manual
Sony Cable Box Cable Box User Manual
Sony Network Router HDS X5800 User Manual
SOYO Computer Hardware FC PGA Socket 370 Processor supported 815E AGP PCI CNR 66 100 133 MHz Front Side Bus supported ATX Form Factor User Manual
Speco Technologies Security Camera CVC6146SCFF User Manual
Sun Microsystems Network Card Ethernet PCI Adapter User Manual
Superior Furnace ETK36 B User Manual
Super Talent Technology Computer Drive AES 256 User Manual